MailKit An IMAP client that can be used to retrieve messages from a server. The class supports both the "imap" and "imaps" protocols. The "imap" protocol makes a clear-text connection to the IMAP server and does not use SSL or TLS unless the IMAP server supports the STARTTLS extension. The "imaps" protocol, however, connects to the IMAP server using an SSL-wrapped connection. Asynchronously enable compression over the IMAP connection. Asynchronously enables compression over the IMAP connection. If the IMAP server supports the extension, it is possible at any point after connecting to enable compression to reduce network bandwidth usage. Ideally, this method should be called before authenticating. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. Compression must be enabled before a folder has been selected. The IMAP server does not support the COMPRESS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the COMPRESS command with a NO or BAD response. An IMAP protocol error occurred. Asynchronously enable the QRESYNC feature. Enables the QRESYNC feature. The QRESYNC extension improves resynchronization performance of folders by querying the IMAP server for a list of changes when the folder is opened using the method. If this feature is enabled, the event is replaced with the event. This method needs to be called immediately after calling one of the Authenticate methods, before opening any folders. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. Quick resynchronization needs to be enabled before selecting a folder. The IMAP server does not support the QRESYNC extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the ENABLE command with a NO or BAD response. An IMAP protocol error occurred. Asynchronously enable the UTF8=ACCEPT extension. Enables the UTF8=ACCEPT extension. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. UTF8=ACCEPT needs to be enabled before selecting a folder. The IMAP server does not support the UTF8=ACCEPT extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the ENABLE command with a NO or BAD response. An IMAP protocol error occurred. Asynchronously identify the client implementation to the server and obtain the server implementation details. Passes along the client implementation details to the server while also obtaining implementation details from the server. If the is or no properties have been set, no identifying information will be sent to the server. Security Implications This command has the danger of violating the privacy of users if misused. Clients should notify users that they send the ID command. It is highly desirable that implementations provide a method of disabling ID support, perhaps by not calling this method at all, or by passing as the argument. Implementors must exercise extreme care in adding properties to the . Some properties, such as a processor ID number, Ethernet address, or other unique (or mostly unique) identifier would allow tracking of users in ways that violate user privacy expectations and may also make it easier for attackers to exploit security holes in the client. The implementation details of the server if available; otherwise, . The client implementation. The cancellation token. The has been disposed. The is not connected. The IMAP server does not support the ID extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the ID command with a NO or BAD response. An IMAP protocol error occurred. Asynchronously authenticate using the specified SASL mechanism. Authenticates using the specified SASL mechanism. For a list of available SASL authentication mechanisms supported by the server, check the property after the service has been connected. An asynchronous task context. The SASL mechanism. The cancellation token. is . The has been disposed. The is not connected. The is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. An IMAP command failed. An IMAP protocol error occurred. Asynchronously authenticate using the supplied credentials. Asynchronously authenticates using the supplied credentials. If the IMAP server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then LOGIN command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. An asynchronous task context. The text encoding to use for the user's credentials. The user's credentials. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. An IMAP command failed. An IMAP protocol error occurred. Asynchronously establish a connection to the specified IMAP server. Establishes a connection to the specified IMAP or IMAP/S server. If the has a value of 0, then the parameter is used to determine the default port to connect to. The default port used with is 993. All other values will use a default port of 143. If the has a value of , then the is used to determine the default security options. If the has a value of 993, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. An asynchronous task context. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. was set to and the IMAP server does not support the STARTTLS extension. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An error occurred during the SSL/TLS negotiations. An I/O error occurred. An IMAP command failed. An IMAP protocol error occurred. Asynchronously establish a connection to the specified IMAP or IMAP/S server using the provided socket. Establishes a connection to the specified IMAP or IMAP/S server using the provided socket. If the has a value of , then the is used to determine the default security options. If the has a value of 993, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. With the exception of using the to determine the default to use when the value is , the and parameters are only used for logging purposes. An asynchronous task context. The socket to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. is not connected. -or- The is a zero-length string. The has been disposed. The is already connected. was set to and the IMAP server does not support the STARTTLS extension. The operation was canceled via the cancellation token. An error occurred during the SSL/TLS negotiations. An I/O error occurred. An IMAP command failed. An IMAP protocol error occurred. Asynchronously establish a connection to the specified IMAP or IMAP/S server using the provided stream. Establishes a connection to the specified IMAP or IMAP/S server using the provided stream. If the has a value of , then the is used to determine the default security options. If the has a value of 993, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. With the exception of using the to determine the default to use when the value is , the and parameters are only used for logging purposes. An asynchronous task context. The stream to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. was set to and the IMAP server does not support the STARTTLS extension. The operation was canceled via the cancellation token. An error occurred during the SSL/TLS negotiations. An I/O error occurred. An IMAP command failed. An IMAP protocol error occurred. Asynchronously disconnect the service. If is , a LOGOUT command will be issued in order to disconnect cleanly. An asynchronous task context. If set to , a LOGOUT command will be issued in order to disconnect cleanly. The cancellation token. The has been disposed. Asynchronously ping the IMAP server to keep the connection alive. The NOOP command is typically used to keep the connection with the IMAP server alive. When a client goes too long (typically 30 minutes) without sending any commands to the IMAP server, the IMAP server will close the connection with the client, forcing the client to reconnect before it can send any more commands. The NOOP command also provides a great way for a client to check for new messages. When the IMAP server receives a NOOP command, it will reply to the client with a list of pending updates such as EXISTS and RECENT counts on the currently selected folder. To receive these notifications, subscribe to the and events, respectively. For more information about the NOOP command, see rfc3501. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the NOOP command with a NO or BAD response. The server responded with an unexpected token. Asynchronously toggle the into the IDLE state. When a client enters the IDLE state, the IMAP server will send events to the client as they occur on the selected folder. These events may include notifications of new messages arriving, expunge notifications, flag changes, etc. Due to the nature of the IDLE command, a folder must be selected before a client can enter into the IDLE state. This can be done by opening a folder using or any of the other variants. While the IDLE command is running, no other commands may be issued until the is cancelled. It is especially important to cancel the before cancelling the when using SSL or TLS due to the fact that cannot be polled. An asynchronous task context. The cancellation token used to return to the non-idle state. The cancellation token. must be cancellable (i.e. cannot be used). The has been disposed. The is not connected. The is not authenticated. A has not been opened. The IMAP server does not support the IDLE extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the IDLE command with a NO or BAD response. The server responded with an unexpected token. Asynchronously request the specified notification events from the IMAP server. The NOTIFY command is used to expand which notifications the client wishes to be notified about, including status notifications about folders other than the currently selected folder. It can also be used to automatically FETCH information about new messages that have arrived in the currently selected folder. This, combined with , can be used to get instant notifications for changes to any of the specified folders. An asynchronous task context. if the server should immediately notify the client of the selected folder's status; otherwise, . The specific event groups that the client would like to receive notifications for. The cancellation token. is . is empty. The has been disposed. The is not connected. The is not authenticated. One or more is invalid. The IMAP server does not support the NOTIFY extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the NOTIFY command with a NO or BAD response. The server responded with an unexpected token. Asynchronously disable any previously requested notification events from the IMAP server. Disables any notification events requested in a prior call to . request. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the NOTIFY extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the NOTIFY command with a NO or BAD response. The server responded with an unexpected token. Asynchronously get all of the folders within the specified namespace. Gets all of the folders within the specified namespace. The folders. The namespace. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. The namespace folder could not be found. An I/O error occurred. The server replied to the LIST or LSUB command with a NO or BAD response. The server responded with an unexpected token. Asynchronously get the folder for the specified path. Gets the folder for the specified path. The folder. The folder path. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. The folder could not be found. An I/O error occurred. The server replied to the LIST command with a NO or BAD response. The server responded with an unexpected token. Asynchronously gets the specified metadata. Gets the specified metadata. The requested metadata value. The metadata tag. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the METADATA or METADATA-SERVER extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously gets the specified metadata. Gets the specified metadata. The requested metadata. The metadata options. The metadata tags. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the METADATA or METADATA-SERVER extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously gets the specified metadata. Sets the specified metadata. An asynchronous task context. The metadata. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the METADATA or METADATA-SERVER extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Initializes a new instance of the class. Before you can retrieve messages with the , you must first call one of the Connect methods and then authenticate with the one of the Authenticate methods. Initializes a new instance of the class. Before you can retrieve messages with the , you must first call one of the Connect methods and then authenticate with the one of the Authenticate methods. The protocol logger. is . Gets an object that can be used to synchronize access to the IMAP server. Gets an object that can be used to synchronize access to the IMAP server. When using the non-Async methods from multiple threads, it is important to lock the object for thread safety when using the synchronous methods. The lock object. Get the protocol supported by the message service. Gets the protocol supported by the message service. The protocol. Get the capabilities supported by the IMAP server. The capabilities will not be known until a successful connection has been made via one of the Connect methods and may change as a side-effect of calling one of the Authenticate methods. The capabilities. Capabilities cannot be enabled, they may only be disabled. Get the maximum size of a message that can be appended to a folder. Gets the maximum size of a message, in bytes, that can be appended to a folder. If the value is not set, then the limit is unspecified. The append limit. Get the internationalization level supported by the IMAP server. Gets the internationalization level supported by the IMAP server. For more information, see section 4 of rfc5255. The internationalization level. Get the access rights supported by the IMAP server. These rights are additional rights supported by the IMAP server beyond the standard rights defined in section 2.1 of rfc4314 and will not be populated until the client is successfully connected. The rights. Instantiate a new . Creates a new instance. This method's purpose is to allow subclassing . The IMAP folder instance. The constructor arguments. is . Enable compression over the IMAP connection. Enables compression over the IMAP connection. If the IMAP server supports the extension, it is possible at any point after connecting to enable compression to reduce network bandwidth usage. Ideally, this method should be called before authenticating. The cancellation token. The has been disposed. The is not connected. Compression must be enabled before a folder has been selected. The IMAP server does not support the extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the COMPRESS command with a NO or BAD response. An IMAP protocol error occurred. Enable the QRESYNC feature. Enables the QRESYNC feature. The QRESYNC extension improves resynchronization performance of folders by querying the IMAP server for a list of changes when the folder is opened using the method. If this feature is enabled, the event is replaced with the event. This method needs to be called immediately after calling one of the Authenticate methods, before opening any folders. The cancellation token. The has been disposed. The is not connected. The is not authenticated. Quick resynchronization needs to be enabled before selecting a folder. The IMAP server does not support the QRESYNC extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the ENABLE command with a NO or BAD response. An IMAP protocol error occurred. Enable the UTF8=ACCEPT extension. Enables the UTF8=ACCEPT extension. The cancellation token. The has been disposed. The is not connected. The is not authenticated. UTF8=ACCEPT needs to be enabled before selecting a folder. The IMAP server does not support the UTF8=ACCEPT extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the ENABLE command with a NO or BAD response. An IMAP protocol error occurred. Identify the client implementation to the server and obtain the server implementation details. Passes along the client implementation details to the server while also obtaining implementation details from the server. If the is or no properties have been set, no identifying information will be sent to the server. Security Implications This command has the danger of violating the privacy of users if misused. Clients should notify users that they send the ID command. It is highly desirable that implementations provide a method of disabling ID support, perhaps by not calling this method at all, or by passing as the argument. Implementors must exercise extreme care in adding properties to the . Some properties, such as a processor ID number, Ethernet address, or other unique (or mostly unique) identifier would allow tracking of users in ways that violate user privacy expectations and may also make it easier for attackers to exploit security holes in the client. The implementation details of the server if available; otherwise, . The client implementation. The cancellation token. The has been disposed. The is not connected. The IMAP server does not support the ID extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the ID command with a NO or BAD response. An IMAP protocol error occurred. Get the authentication mechanisms supported by the IMAP server. The authentication mechanisms are queried as part of the Connect method. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before authenticating. The authentication mechanisms. Get the threading algorithms supported by the IMAP server. The threading algorithms are queried as part of the Connect and Authenticate methods. The supported threading algorithms. Get or set the timeout for network streaming operations, in milliseconds. Gets or sets the underlying socket stream's and values. The timeout in milliseconds. Get whether or not the client is currently connected to an IMAP server. The state is set to immediately after one of the Connect methods succeeds and is not set back to until either the client is disconnected via or until an is thrown while attempting to read or write to the underlying network socket. When an is caught, the connection state of the should be checked before continuing. if the client is connected; otherwise, . Get whether or not the connection is secure (typically via SSL or TLS). Gets whether or not the connection is secure (typically via SSL or TLS). if the connection is secure; otherwise, . Get whether or not the connection is encrypted (typically via SSL or TLS). Gets whether or not the connection is encrypted (typically via SSL or TLS). if the connection is encrypted; otherwise, . Get whether or not the connection is signed (typically via SSL or TLS). Gets whether or not the connection is signed (typically via SSL or TLS). if the connection is signed; otherwise, . Get the negotiated SSL or TLS protocol version. Gets the negotiated SSL or TLS protocol version once an SSL or TLS connection has been made. The negotiated SSL or TLS protocol version. Get the negotiated SSL or TLS cipher algorithm. Gets the negotiated SSL or TLS cipher algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS cipher algorithm. Get the negotiated SSL or TLS cipher algorithm strength. Gets the negotiated SSL or TLS cipher algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS cipher algorithm strength. Get the negotiated SSL or TLS hash algorithm. Gets the negotiated SSL or TLS hash algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS hash algorithm. Get the negotiated SSL or TLS hash algorithm strength. Gets the negotiated SSL or TLS hash algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS hash algorithm strength. Get the negotiated SSL or TLS key exchange algorithm. Gets the negotiated SSL or TLS key exchange algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS key exchange algorithm. Get the negotiated SSL or TLS key exchange algorithm strength. Gets the negotiated SSL or TLS key exchange algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS key exchange algorithm strength. Get whether or not the client is currently authenticated with the IMAP server. Gets whether or not the client is currently authenticated with the IMAP server. To authenticate with the IMAP server, use one of the Authenticate methods. if the client is connected; otherwise, . Get whether or not the client is currently in the IDLE state. Gets whether or not the client is currently in the IDLE state. if an IDLE command is active; otherwise, . Authenticate using the specified SASL mechanism. Authenticates using the specified SASL mechanism. For a list of available SASL authentication mechanisms supported by the server, check the property after the service has been connected. The SASL mechanism. The cancellation token. is . The has been disposed. The is not connected. The is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. An IMAP command failed. An IMAP protocol error occurred. Authenticate using the supplied credentials. Authenticates using the supplied credentials. If the IMAP server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then LOGIN command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. The text encoding to use for the user's credentials. The user's credentials. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. An IMAP command failed. An IMAP protocol error occurred. Establish a connection to the specified IMAP server. Establishes a connection to the specified IMAP or IMAP/S server. If the has a value of 0, then the parameter is used to determine the default port to connect to. The default port used with is 993. All other values will use a default port of 143. If the has a value of , then the is used to determine the default security options. If the has a value of 993, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. was set to and the IMAP server does not support the STARTTLS extension. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. An IMAP command failed. An IMAP protocol error occurred. Establish a connection to the specified IMAP or IMAP/S server using the provided socket. Establishes a connection to the specified IMAP or IMAP/S server using the provided socket. If the has a value of , then the is used to determine the default security options. If the has a value of 993, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. With the exception of using the to determine the default to use when the value is , the and parameters are only used for logging purposes. The socket to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. is not connected. -or- The is a zero-length string. The has been disposed. The is already connected. was set to and the IMAP server does not support the STARTTLS extension. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP command failed. An IMAP protocol error occurred. Establish a connection to the specified IMAP or IMAP/S server using the provided stream. Establishes a connection to the specified IMAP or IMAP/S server using the provided stream. If the has a value of , then the is used to determine the default security options. If the has a value of 993, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. With the exception of using the to determine the default to use when the value is , the and parameters are only used for logging purposes. The stream to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. was set to and the IMAP server does not support the STARTTLS extension. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP command failed. An IMAP protocol error occurred. Disconnect the service. If is , a LOGOUT command will be issued in order to disconnect cleanly. If set to , a LOGOUT command will be issued in order to disconnect cleanly. The cancellation token. The has been disposed. Ping the IMAP server to keep the connection alive. The NOOP command is typically used to keep the connection with the IMAP server alive. When a client goes too long (typically 30 minutes) without sending any commands to the IMAP server, the IMAP server will close the connection with the client, forcing the client to reconnect before it can send any more commands. The NOOP command also provides a great way for a client to check for new messages. When the IMAP server receives a NOOP command, it will reply to the client with a list of pending updates such as EXISTS and RECENT counts on the currently selected folder. To receive these notifications, subscribe to the and events, respectively. For more information about the NOOP command, see rfc3501. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the NOOP command with a NO or BAD response. The server responded with an unexpected token. Toggle the into the IDLE state. When a client enters the IDLE state, the IMAP server will send events to the client as they occur on the selected folder. These events may include notifications of new messages arriving, expunge notifications, flag changes, etc. Due to the nature of the IDLE command, a folder must be selected before a client can enter into the IDLE state. This can be done by opening a folder using or any of the other variants. While the IDLE command is running, no other commands may be issued until the is cancelled. It is especially important to cancel the before cancelling the when using SSL or TLS due to the fact that cannot be polled. The cancellation token used to return to the non-idle state. The cancellation token. must be cancellable (i.e. cannot be used). The has been disposed. The is not connected. The is not authenticated. A has not been opened. The IMAP server does not support the IDLE extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the IDLE command with a NO or BAD response. The server responded with an unexpected token. Request the specified notification events from the IMAP server. The NOTIFY command is used to expand which notifications the client wishes to be notified about, including status notifications about folders other than the currently selected folder. It can also be used to automatically FETCH information about new messages that have arrived in the currently selected folder. This, combined with , can be used to get instant notifications for changes to any of the specified folders. if the server should immediately notify the client of the selected folder's status; otherwise, . The specific event groups that the client would like to receive notifications for. The cancellation token. is . is empty. The has been disposed. The is not connected. The is not authenticated. One or more is invalid. The IMAP server does not support the NOTIFY extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the NOTIFY command with a NO or BAD response. The server responded with an unexpected token. Disable any previously requested notification events from the IMAP server. Disables any notification events requested in a prior call to . request. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the NOTIFY extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the NOTIFY command with a NO or BAD response. The server responded with an unexpected token. Get the personal namespaces. The personal folder namespaces contain a user's personal mailbox folders. The personal namespaces. Get the shared namespaces. The shared folder namespaces contain mailbox folders that are shared with the user. The shared namespaces. Get the other namespaces. The other folder namespaces contain other mailbox folders. The other namespaces. Get whether or not the mail store supports quotas. Gets whether or not the mail store supports quotas. if the mail store supports quotas; otherwise, . Get the Inbox folder. The Inbox folder is the default folder and always exists on the server. This property will only be available after the client has been authenticated. The Inbox folder. The has been disposed. The is not connected. The is not authenticated. Get the specified special folder. Not all IMAP servers support special folders. Only IMAP servers supporting the or extensions may have special folders. The folder if available; otherwise . The type of special folder. is out of range. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the SPECIAL-USE nor XLIST extensions. Get the folder for the specified namespace. Gets the folder for the specified namespace. The folder. The namespace. is . The has been disposed. The is not connected. The is not authenticated. The folder could not be found. Get all of the folders within the specified namespace. Gets all of the folders within the specified namespace. The folders. The namespace. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. The namespace folder could not be found. An I/O error occurred. The server replied to the LIST or LSUB command with a NO or BAD response. The server responded with an unexpected token. Get the folder for the specified path. Gets the folder for the specified path. The folder. The folder path. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. The folder could not be found. An I/O error occurred. The server replied to the LIST command with a NO or BAD response. The server responded with an unexpected token. Gets the specified metadata. Gets the specified metadata. The requested metadata value. The metadata tag. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the METADATA or METADATA-SERVER extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Gets the specified metadata. Gets the specified metadata. The requested metadata. The metadata options. The metadata tags. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the METADATA or METADATA-SERVER extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Sets the specified metadata. Sets the specified metadata. The metadata. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the METADATA or METADATA-SERVER extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Occurs when a Google Mail server sends a WEBALERT response code to the client. The event is raised whenever the Google Mail server sends a WEBALERT message. Raise the web alert event. Raises the web alert event. The web alert URI. The web alert message. is . -or- is . Releases the unmanaged resources used by the and optionally releases the managed resources. Releases the unmanaged resources used by the and optionally releases the managed resources. to release both managed and unmanaged resources; to release only the unmanaged resources. An interface for an IMAP client. Implemented by . Get the capabilities supported by the IMAP server. The capabilities will not be known until a successful connection has been made via one of the Connect methods and may change as a side-effect of calling one of the Authenticate methods. The capabilities. Capabilities cannot be enabled, they may only be disabled. Get the maximum size of a message that can be appended to a folder. Gets the maximum size of a message, in bytes, that can be appended to a folder. If the value is not set, then the limit is unspecified. The append limit. Get the internationalization level supported by the IMAP server. Gets the internationalization level supported by the IMAP server. For more information, see section 4 of rfc5255. The internationalization level. Get the access rights supported by the IMAP server. These rights are additional rights supported by the IMAP server beyond the standard rights defined in section 2.1 of rfc4314 and will not be populated until the client is successfully connected. The rights. Get whether or not the client is currently in the IDLE state. Gets whether or not the client is currently in the IDLE state. if an IDLE command is active; otherwise, . Enable compression over the IMAP connection. Enables compression over the IMAP connection. If the IMAP server supports the extension, it is possible at any point after connecting to enable compression to reduce network bandwidth usage. Ideally, this method should be called before authenticating. The cancellation token. The has been disposed. The is not connected. Compression must be enabled before a folder has been selected. The IMAP server does not support the extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the COMPRESS command with a NO or BAD response. An IMAP protocol error occurred. Asynchronously enable compression over the IMAP connection. Asynchronously enables compression over the IMAP connection. If the IMAP server supports the extension, it is possible at any point after connecting to enable compression to reduce network bandwidth usage. Ideally, this method should be called before authenticating. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. Compression must be enabled before a folder has been selected. The IMAP server does not support the COMPRESS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the COMPRESS command with a NO or BAD response. An IMAP protocol error occurred. Enable the UTF8=ACCEPT extension. Enables the UTF8=ACCEPT extension. The cancellation token. The has been disposed. The is not connected. The is not authenticated. UTF8=ACCEPT needs to be enabled before selecting a folder. The IMAP server does not support the UTF8=ACCEPT extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the ENABLE command with a NO or BAD response. An IMAP protocol error occurred. Asynchronously enable the UTF8=ACCEPT extension. Enables the UTF8=ACCEPT extension. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. UTF8=ACCEPT needs to be enabled before selecting a folder. The IMAP server does not support the UTF8=ACCEPT extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the ENABLE command with a NO or BAD response. An IMAP protocol error occurred. Identify the client implementation to the server and obtain the server implementation details. Passes along the client implementation details to the server while also obtaining implementation details from the server. If the is or no properties have been set, no identifying information will be sent to the server. Security Implications This command has the danger of violating the privacy of users if misused. Clients should notify users that they send the ID command. It is highly desirable that implementations provide a method of disabling ID support, perhaps by not calling this method at all, or by passing as the argument. Implementors must exercise extreme care in adding properties to the . Some properties, such as a processor ID number, Ethernet address, or other unique (or mostly unique) identifier would allow tracking of users in ways that violate user privacy expectations and may also make it easier for attackers to exploit security holes in the client. The implementation details of the server if available; otherwise, . The client implementation. The cancellation token. The has been disposed. The is not connected. The IMAP server does not support the ID extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the ID command with a NO or BAD response. An IMAP protocol error occurred. Asynchronously identify the client implementation to the server and obtain the server implementation details. Passes along the client implementation details to the server while also obtaining implementation details from the server. If the is or no properties have been set, no identifying information will be sent to the server. Security Implications This command has the danger of violating the privacy of users if misused. Clients should notify users that they send the ID command. It is highly desirable that implementations provide a method of disabling ID support, perhaps by not calling this method at all, or by passing as the argument. Implementors must exercise extreme care in adding properties to the . Some properties, such as a processor ID number, Ethernet address, or other unique (or mostly unique) identifier would allow tracking of users in ways that violate user privacy expectations and may also make it easier for attackers to exploit security holes in the client. The implementation details of the server if available; otherwise, . The client implementation. The cancellation token. The has been disposed. The is not connected. The IMAP server does not support the ID extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the ID command with a NO or BAD response. An IMAP protocol error occurred. Toggle the into the IDLE state. When a client enters the IDLE state, the IMAP server will send events to the client as they occur on the selected folder. These events may include notifications of new messages arriving, expunge notifications, flag changes, etc. Due to the nature of the IDLE command, a folder must be selected before a client can enter into the IDLE state. This can be done by opening a folder using or any of the other variants. While the IDLE command is running, no other commands may be issued until the is cancelled. It is especially important to cancel the before cancelling the when using SSL or TLS due to the fact that cannot be polled. The cancellation token used to return to the non-idle state. The cancellation token. must be cancellable (i.e. cannot be used). The has been disposed. The is not connected. The is not authenticated. A has not been opened. The IMAP server does not support the IDLE extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the IDLE command with a NO or BAD response. The server responded with an unexpected token. Asynchronously toggle the into the IDLE state. When a client enters the IDLE state, the IMAP server will send events to the client as they occur on the selected folder. These events may include notifications of new messages arriving, expunge notifications, flag changes, etc. Due to the nature of the IDLE command, a folder must be selected before a client can enter into the IDLE state. This can be done by opening a folder using or any of the other variants. While the IDLE command is running, no other commands may be issued until the is cancelled. It is especially important to cancel the before cancelling the when using SSL or TLS due to the fact that cannot be polled. An asynchronous task context. The cancellation token used to return to the non-idle state. The cancellation token. must be cancellable (i.e. cannot be used). The has been disposed. The is not connected. The is not authenticated. A has not been opened. The IMAP server does not support the IDLE extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the IDLE command with a NO or BAD response. The server responded with an unexpected token. Request the specified notification events from the IMAP server. The NOTIFY command is used to expand which notifications the client wishes to be notified about, including status notifications about folders other than the currently selected folder. It can also be used to automatically FETCH information about new messages that have arrived in the currently selected folder. This, combined with , can be used to get instant notifications for changes to any of the specified folders. if the server should immediately notify the client of the selected folder's status; otherwise, . The specific event groups that the client would like to receive notifications for. The cancellation token. is . is empty. The has been disposed. The is not connected. The is not authenticated. One or more is invalid. The IMAP server does not support the NOTIFY extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the NOTIFY command with a NO or BAD response. The server responded with an unexpected token. Asynchronously request the specified notification events from the IMAP server. The NOTIFY command is used to expand which notifications the client wishes to be notified about, including status notifications about folders other than the currently selected folder. It can also be used to automatically FETCH information about new messages that have arrived in the currently selected folder. This, combined with , can be used to get instant notifications for changes to any of the specified folders. An asynchronous task context. if the server should immediately notify the client of the selected folder's status; otherwise, . The specific event groups that the client would like to receive notifications for. The cancellation token. is . is empty. The has been disposed. The is not connected. The is not authenticated. One or more is invalid. The IMAP server does not support the NOTIFY extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the NOTIFY command with a NO or BAD response. The server responded with an unexpected token. Disable any previously requested notification events from the IMAP server. Disables any notification events requested in a prior call to . request. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the NOTIFY extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the NOTIFY command with a NO or BAD response. The server responded with an unexpected token. Asynchronously disable any previously requested notification events from the IMAP server. Disables any notification events requested in a prior call to . request. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the NOTIFY extension. The operation was canceled via the cancellation token. An I/O error occurred. The server replied to the NOTIFY command with a NO or BAD response. The server responded with an unexpected token. An interface for an IMAP folder. Implemented by . Get the specified body part headers. Gets the specified body part headers. The body part headers. The UID of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified body part headers. Gets the specified body part headers. The body part headers. The UID of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified body part headers. Gets the specified body part headers. The body part headers. The index of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is out of range. is . The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified body part headers. Gets the specified body part headers. The body part headers. The index of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is out of range. is . The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified body part. Gets the specified body part. For more information about how to construct the , see RFC3501, Section 6.4.5. The body part. The UID of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified body part. Gets the specified body part. For more information about how to construct the , see RFC3501, Section 6.4.5. The body part. The UID of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified body part. Gets the specified body part. For more information about how to construct the , see RFC3501, Section 6.4.5. The body part. The index of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified body part. Gets the specified body part. For more information about how to construct the , see RFC3501, Section 6.4.5. The body part. The index of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the streams for the specified messages. Gets the streams for the specified messages. The uids of the messages. A callback method that gets called for each stream as it is received. The cancellation token. The progress reporting mechanism. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the streams for the specified messages. Asynchronously gets the streams for the specified messages. An awaitable task. The uids of the messages. A callback method that gets called for each stream as it is received. The cancellation token. The progress reporting mechanism. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the streams for the specified messages. Gets the streams for the specified messages. The indexes of the messages. A callback method that gets called for each stream as it is received. The cancellation token. The progress reporting mechanism. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the streams for the specified messages. Asynchronously gets the streams for the specified messages. An awaitable task. The indexes of the messages. A callback method that gets called for each stream as it is received. The cancellation token. The progress reporting mechanism. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the streams for the specified messages. Gets the streams for the specified messages. The minimum index. The maximum index, or -1 to specify no upper bound. A callback method that gets called for each stream as it is received. The cancellation token. The progress reporting mechanism. is out of range. -or- is out of range. is . The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the streams for the specified messages. Asynchronously gets the streams for the specified messages. An awaitable task. The minimum index. The maximum index, or -1 to specify no upper bound. A callback method that gets called for each stream as it is received. The cancellation token. The progress reporting mechanism. is out of range. -or- is out of range. is . The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Search the folder for messages matching the specified query. Sends a UID SEARCH command with the specified query passed directly to the IMAP server with no interpretation by MailKit. This means that the query may contain any arguments that a UID SEARCH command is allowed to have according to the IMAP specifications and any extensions that are supported, including RETURN parameters. An array of matching UIDs. The search query. The cancellation token. is . is an empty string. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously search the folder for messages matching the specified query. Sends a UID SEARCH command with the specified query passed directly to the IMAP server with no interpretation by MailKit. This means that the query may contain any arguments that a UID SEARCH command is allowed to have according to the IMAP specifications and any extensions that are supported, including RETURN parameters. An array of matching UIDs. The search query. The cancellation token. is . is an empty string. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Sort messages matching the specified query. Sends a UID SORT command with the specified query passed directly to the IMAP server with no interpretation by MailKit. This means that the query may contain any arguments that a UID SORT command is allowed to have according to the IMAP specifications and any extensions that are supported, including RETURN parameters. An array of matching UIDs. The search query. The cancellation token. is . is an empty string. The IMAP server does not support the SORT extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously sort messages matching the specified query. Sends a UID SORT command with the specified query passed directly to the IMAP server with no interpretation by MailKit. This means that the query may contain any arguments that a UID SORT command is allowed to have according to the IMAP specifications and any extensions that are supported, including RETURN parameters. An array of matching UIDs. The search query. The cancellation token. is . is an empty string. The IMAP server does not support the SORT extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. A callback used when fetching message streams. This callback is meant to be used with the various GetStreams methods. Once this callback returns, the stream argument will be disposed, so it is important to consume the stream right away and not add it to a queue for later processing. The IMAP folder that the message belongs to. The index of the message in the folder. The UID of the message in the folder. The raw message (or part) stream. An asynchronous callback used when fetching message streams. This callback is meant to be used with the various GetStreamsAsync methods. Once this callback returns, the stream argument will be disposed, so it is important to consume the stream right away and not add it to a queue for later processing. An awaitable task context. The IMAP folder that the message belongs to. The index of the message in the folder. The UID of the message in the folder. The raw message (or part) stream. The cancellation token. Capabilities supported by an IMAP server. Capabilities are read as part of the response to the CAPABILITY command that is issued during the connection and authentication phases of the . The server does not support any additional extensions. The server implements the core IMAP4 commands. The server implements the core IMAP4rev1 commands. The server implements the core IMAP4rev2 commands described in rfc9051. The server supports the STATUS command. The server supports the ACL extension defined in rfc2086 and rfc4314. The server supports the QUOTA extension. The server supports the LITERAL+ extension. The server supports the IDLE extension. The server supports the MAILBOX-REFERRALS extension. the server supports the LOGIN-REFERRALS extension. The server supports the NAMESPACE extension. The server supports the ID extension. The server supports the CHILDREN extension. The server supports the LOGINDISABLED extension. The server supports the STARTTLS extension. The server supports the MULTIAPPEND extension. The server supports the BINARY content extension. The server supports the UNSELECT extension. The server supports the UIDPLUS extension. The server supports the CATENATE extension. The server supports the CONDSTORE extension. The server supports the ESEARCH extension. The server supports the SASL-IR extension. The server supports the COMPRESS extension. The server supports the WITHIN extension. The server supports the ENABLE extension. The server supports the QRESYNC extension. The server supports the SEARCHRES extension. The server supports the SORT extension. The server supports the THREAD extension. The server supports the ANNOTATE extension. The server supports the LIST-EXTENDED extension. The server supports the CONVERT extension. The server supports the LANGUAGE extension. The server supports the I18NLEVEL extension. The server supports the ESORT extension. The server supports the CONTEXT extension. The server supports the METADATA extension. The server supports the METADATA-SERVER extension. The server supports the NOTIFY extension. The server supports the FILTERS extension. The server supports the LIST-STATUS extension. The server supports the SORT=DISPLAY extension. The server supports the CREATE-SPECIAL-USE extension. The server supports the SPECIAL-USE extension. The server supports the SEARCH=FUZZY extension. The server supports the MULTISEARCH extension. The server supports the MOVE extension. The server supports the UTF8=ACCEPT extension. The server supports the UTF8=ONLY extension. The server supports the LITERAL- extension. The server supports the APPENDLIMIT extension. The server supports the UNAUTHENTICATE extension. The server supports the STATUS=SIZE extension. The server supports the LIST-MYRIGHTS extension. The server supports the OBJECTID extension. The server supports the REPLACE extension. The server supports the SAVEDATE extension. The server supports the PREVIEW extension. The server supports the XLIST extension (GMail). The server supports the X-GM-EXT1 extension (GMail). An IMAP continuation handler. All exceptions thrown by the handler are considered fatal and will force-disconnect the connection. If a non-fatal error occurs, set it on the property. An IMAP untagged response handler. Most IMAP commands return their results in untagged responses. A partial IMAP command. IMAP commands that contain literal strings are broken up into multiple parts in case the IMAP server does not support the LITERAL+ extension. These parts are then sent individually as we receive "+" responses from the server. An IMAP command. Initializes a new instance of the class. Creates a new . The IMAP engine that will be sending the command. The cancellation token. The IMAP folder that the command operates on. The formatting options. The command format. The command arguments. is . -or- is . -or- is . Initializes a new instance of the class. Creates a new . The IMAP engine that will be sending the command. The cancellation token. The IMAP folder that the command operates on. The command format. The command arguments. is . -or- is . Registers the untagged handler for the specified atom token. The atom token. The handler. is . -or- is . Untagged handlers must be registered before the command has been queued. Sends the next part of the command to the server. if there are more command parts to send; otherwise, . The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Sends the next part of the command to the server. if there are more command parts to send; otherwise, . The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Get the first response-code of the specified type. Gets the first response-code of the specified type. The type of response-code. The response-code if it exists; otherwise, . Throw an if the response was not OK. Throws an if the response was not OK. An exception that is thrown when an IMAP command returns NO or BAD. The exception that is thrown when an IMAP command fails. Unlike a , a does not require the to be reconnected. Initializes a new instance of the class. Creates a new from the serialized data. The serialization info. The streaming context. is . Create a new based on the specified command name and state. Create a new based on the specified command name and state. A new command exception. The command name. The command state. Initializes a new instance of the class. Creates a new . The IMAP command response. The error message. The human-readable response text. The inner exception. Initializes a new instance of the class. Creates a new . The IMAP command response. The human-readable response text. The error message. Initializes a new instance of the class. Creates a new . The IMAP command response. The human-readable response text. Gets the IMAP command response. Gets the IMAP command response. The IMAP command response. Gets the human-readable IMAP command response text. Gets the human-readable IMAP command response text. The response text. When overridden in a derived class, sets the with information about the exception. Serializes the state of the . The serialization info. The streaming context. is . An enumeration of possible IMAP command responses. An enumeration of possible IMAP command responses. No IMAP command response yet. The command resulted in an "OK" response. The command resulted in a "NO" response. The command resulted in a "BAD" response. IMAP command status. The state of the . The ImapEngine is in the disconnected state. The ImapEngine is in the process of connecting. The ImapEngine is connected but not yet authenticated. The ImapEngine is in the authenticated state. The ImapEngine is in the selected state. The ImapEngine is in the IDLE state. An IMAP command engine. Get the authentication mechanisms supported by the IMAP server. The authentication mechanisms are queried during the or methods. The authentication mechanisms. Get the compression algorithms supported by the IMAP server. The compression algorithms are populated by the and methods. The compression algorithms. Get the threading algorithms supported by the IMAP server. The threading algorithms are populated by the and methods. The threading algorithms. Gets the append limit supported by the IMAP server. Gets the append limit supported by the IMAP server. The append limit. Gets the I18NLEVEL supported by the IMAP server. Gets the I18NLEVEL supported by the IMAP server. The internationalization level. Get the capabilities supported by the IMAP server. The capabilities will not be known until a successful connection has been made via the or method. The capabilities. Indicates whether or not the engine is busy processing commands. Indicates whether or not the engine is busy processing commands. if th e engine is busy processing commands; otherwise, . Get the capabilities version. Every time the engine receives an untagged CAPABILITIES response from the server, it increments this value. The capabilities version. Get the IMAP protocol version. Gets the IMAP protocol version. The IMAP protocol version. Get the rights specified in the capabilities. Gets the rights specified in the capabilities. The rights. Get the supported charsets. Gets the supported charsets. The supported charsets. Get the supported contexts. Gets the supported contexts. The supported contexts. Get whether or not the QRESYNC feature has been enabled. Gets whether or not the QRESYNC feature has been enabled. if the QRESYNC feature has been enabled; otherwise, . Get whether or not the UTF8=ACCEPT feature has been enabled. Gets whether or not the UTF8=ACCEPT feature has been enabled. if the UTF8=ACCEPT feature has been enabled; otherwise, . Get the URI of the IMAP server. Gets the URI of the IMAP server. The URI of the IMAP server. Get the underlying IMAP stream. Gets the underlying IMAP stream. The IMAP stream. Get or sets the state of the engine. Gets or sets the state of the engine. The engine state. Get whether or not the engine is currently connected to a IMAP server. Gets whether or not the engine is currently connected to a IMAP server. if the engine is connected; otherwise, . Gets the personal folder namespaces. Gets the personal folder namespaces. The personal folder namespaces. Gets the shared folder namespaces. Gets the shared folder namespaces. The shared folder namespaces. Gets the other folder namespaces. Gets the other folder namespaces. The other folder namespaces. Gets the selected folder. Gets the selected folder. The selected folder. Gets a value indicating whether the engine is disposed. Gets a value indicating whether the engine is disposed. if the engine is disposed; otherwise, . Gets whether the current NOTIFY status prevents using indexes and * for referencing messages. Gets whether the current NOTIFY status prevents using indexes and * for referencing messages. This is the case when the client has asked for MessageNew or MessageExpunge events on the SELECTED mailbox. if the use of indexes and * is prevented; otherwise, . Gets the Inbox folder. The Inbox folder. Gets the special folder containing an aggregate of all messages. The folder containing all messages. Gets the special archive folder. The archive folder. Gets the special folder containing drafts. The drafts folder. Gets the special folder containing flagged messages. The flagged folder. Gets the special folder containing important messages. The important folder. Gets the special folder containing junk messages. The junk folder. Gets the special folder containing sent messages. The sent. Gets the folder containing deleted messages. The trash folder. Sets the stream - this is only here to be used by the unit tests. The IMAP stream. Takes possession of the and reads the greeting. The IMAP stream. The cancellation token. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Takes possession of the and reads the greeting. The IMAP stream. The cancellation token. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Disconnects the . Disconnects the . The exception that is causing the disconnection. Reads a single line from the . The line. The cancellation token. The engine is not connected. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Asynchronously reads a single line from the . The line. The cancellation token. The engine is not connected. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Reads the next token. The token. The cancellation token. The engine is not connected. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Asynchronously reads the next token. The token. The cancellation token. The engine is not connected. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Reads the next token. The token. A list of characters that are not legal in bare string tokens. The cancellation token. The engine is not connected. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Asynchronously reads the next token. The token. A list of characters that are not legal in bare string tokens. The cancellation token. The engine is not connected. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Peeks at the next token. The next token. A list of characters that are not legal in bare string tokens. The cancellation token. The engine is not connected. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Asynchronously peeks at the next token. The next token. A list of characters that are not legal in bare string tokens. The cancellation token. The engine is not connected. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Peeks at the next token. The next token. The cancellation token. The engine is not connected. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Asynchronously peeks at the next token. The next token. The cancellation token. The engine is not connected. The operation was canceled via the cancellation token. An I/O error occurred. An IMAP protocol error occurred. Reads the literal as a string. The literal. The cancellation token. The is not in literal mode. The operation was canceled via the cancellation token. An I/O error occurred. Asynchronously reads the literal as a string. The literal. The cancellation token. The is not in literal mode. The operation was canceled via the cancellation token. An I/O error occurred. Parses the response code. The response code. Whether or not the resp-code is tagged vs untagged. The cancellation token. Parses the response code. The response code. Whether or not the resp-code is tagged vs untagged. The cancellation token. Processes an untagged response. The untagged response. The cancellation token. Processes an untagged response. The untagged response. The cancellation token. Iterate the command pipeline. Asynchronously iterate the command pipeline. Wait for the specified command to finish. The IMAP command. is . Wait for the specified command to finish. The IMAP command. is . Queues the command. The command. The cancellation token. The folder that the command operates on. The formatting options. The command format. The command arguments. Queues the command. The command. The cancellation token. The folder that the command operates on. The command format. The command arguments. Queues the command. The IMAP command. Queries the capabilities. The command result. The cancellation token. Queries the capabilities. The command result. The cancellation token. Cache the specified folder. The folder. Gets the cached folder. if the folder was retrieved from the cache; otherwise, . The encoded folder name. The cached folder. Looks up and sets the property of each of the folders. The IMAP folders. The cancellation token. Looks up and sets the property of each of the folders. The IMAP folders. The cancellation token. Queries the namespaces. The command result. The cancellation token. Asynchronously queries the namespaces. The command result. The cancellation token. Assigns a folder as a special folder. The special folder. Assigns the special folders. The list of folders. Queries the special folders. The cancellation token. Queries the special folders. The cancellation token. Gets the folder representing the specified quota root. The folder. The name of the quota root. The cancellation token. Gets the folder representing the specified quota root. The folder. The name of the quota root. The cancellation token. Gets the folder for the specified path. The folder. The folder path. The cancellation token. Gets the folder for the specified path. The folder. The folder path. The cancellation token. Get all of the folders within the specified namespace. Gets all of the folders within the specified namespace. The list of folders. The namespace. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. Get all of the folders within the specified namespace. Gets all of the folders within the specified namespace. The list of folders. The namespace. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. Decodes the name of the mailbox. The mailbox name. The encoded name. Encodes the name of the mailbox. The mailbox name. The encoded mailbox name. Determines whether the mailbox name is valid or not. if the mailbox name is valid; otherwise, . The mailbox name. The path delimiter. Occurs when the engine receives an alert message from the server. Occurs when the engine receives a webalert message from the server. Occurs when the engine receives a notification that a folder has been created. Occurs when the engine receives a notification that metadata has changed. Occurs when the engine receives a notification overflow message from the server. Releases all resource used by the object. Call when you are finished using the . The method leaves the in an unusable state. After calling , you must release all references to the so the garbage collector can reclaim the memory that the was occupying. An IMAP event group used with the NOTIFY command. An IMAP event group used with the NOTIFY command. Initializes a new instance of the class. Initializes a new instance of the class. The mailbox filter. The list of IMAP events. is . -or- is . Initializes a new instance of the class. Initializes a new instance of the class. The mailbox filter. The list of IMAP events. is . -or- is . Get the mailbox filter. Gets the mailbox filter. The mailbox filter. Get the list of IMAP events. Gets the list of IMAP events. The events. Format the IMAP NOTIFY command for this particular IMAP event group. Formats the IMAP NOTIFY command for this particular IMAP event group. The IMAP engine. The IMAP command builder. The IMAP command argument builder. Gets set to if the NOTIFY command requests the MessageNew or MessageExpunged events for a SELECTED or SELECTED-DELAYED mailbox filter; otherwise it is left unchanged. An IMAP mailbox filter for use with the NOTIFY command. An IMAP mailbox filter for use with the NOTIFY command. An IMAP mailbox filter specifying that the client wants immediate notifications for the currently selected folder. The SELECTED mailbox specifier requires the server to send immediate notifications for the currently selected mailbox about all specified message events. An IMAP mailbox filter specifying the currently selected folder but delays notifications until a command has been issued. The SELECTED-DELAYED mailbox specifier requires the server to delay a event until the client issues a command that allows returning information about expunged messages (see Section 7.4.1 of RFC3501] for more details), for example, till a NOOP or an IDLE command has been issued. When SELECTED-DELAYED is specified, the server MAY also delay returning other message events until the client issues one of the commands specified above, or it MAY return them immediately. An IMAP mailbox filter specifying the currently selected folder. The INBOXES mailbox specifier refers to all selectable mailboxes in the user's personal namespace(s) to which messages may be delivered by a Message Delivery Agent (MDA). If the IMAP server cannot easily compute this set, it MUST treat as equivalent to . An IMAP mailbox filter specifying all selectable folders within the user's personal namespace. The PERSONAL mailbox specifier refers to all selectable folders within the user's personal namespace. An IMAP mailbox filter that refers to all subscribed folders. The SUBSCRIBED mailbox specifier refers to all folders subscribed to by the user. If the subscription list changes, the server MUST reevaluate the list. An IMAP mailbox filter that specifies a list of folders to receive notifications about. An IMAP mailbox filter that specifies a list of folders to receive notifications about. Initializes a new instance of the class. Initializes a new instance of the class. The list of folders to watch for events. is . The list of is empty. -or- The list of contains folders that are not of type . Initializes a new instance of the class. Initializes a new instance of the class. The list of folders to watch for events. is . The list of is empty. -or- The list of contains folders that are not of type . Initializes a new instance of the class. Initializes a new instance of the class. The name of the mailbox filter. The list of folders to watch for events. is . The list of is empty. -or- The list of contains folders that are not of type . Format the IMAP NOTIFY command for this particular IMAP mailbox filter. Formats the IMAP NOTIFY command for this particular IMAP mailbox filter. The IMAP engine. The IMAP command builder. The IMAP command argument builder. An IMAP mailbox filter that specifies a list of folder subtrees to get notifications about. The client will receive notifications for each specified folder plus all selectable folders that are subordinate to any of the specified folders. Initializes a new instance of the class. Initializes a new instance of the class. The list of folders to watch for events. is . The list of is empty. -or- The list of contains folders that are not of type . Initializes a new instance of the class. Initializes a new instance of the class. The list of folders to watch for events. is . The list of is empty. -or- The list of contains folders that are not of type . Initializes a new instance of the class. Initializes a new instance of the class. The name of the mailbox filter. Get the name of the mailbox filter. Gets the name of the mailbox filter. The name. Format the IMAP NOTIFY command for this particular IMAP mailbox filter. Formats the IMAP NOTIFY command for this particular IMAP mailbox filter. The IMAP engine. The IMAP command builder. The IMAP command argument builder. An IMAP notification event. An IMAP notification event. An IMAP event notification for expunged messages. If the expunged message or messages are in the selected mailbox, the server notifies the client using (or if the QRESYNC extension has been enabled via or ). If the expunged message or messages are in another mailbox, the and properties will be updated and the appropriate and events will be emitted for the relevant folder. If the QRESYNC extension is enabled, the property will also be updated and the event will be emitted. if a client requests with the mailbox specifier, the meaning of a message index can change at any time, so the client cannot use message indexes in commands anymore. The client MUST use API variants that take or a . The meaning of ** can also change when messages are added or expunged. A client wishing to keep using message indexes can either use the mailbox specifier or can avoid using the event entirely. An IMAP event notification for message flag changes. If the notification arrives for a message located in the currently selected folder, then that folder will emit a event as well as a event with an appropriately populated . On the other hand, if the notification arrives for a message that is not located in the currently selected folder, then the events that are emitted will depend on the of the IMAP server. If the server supports the capability (or the capability and the client has enabled it via ), then the event will be emitted as well as the event (if the latter has changed). If the number of seen messages has changed, then the event may also be emitted. If the server does not support either the capability nor the capability and the client has not enabled the later capability via , then the server may choose only to notify the client of changes by emitting the event. An IMAP event notification for message annotation changes. If the notification arrives for a message located in the currently selected folder, then that folder will emit a event as well as a event with an appropriately populated . On the other hand, if the notification arrives for a message that is not located in the currently selected folder, then the events that are emitted will depend on the of the IMAP server. If the server supports the capability (or the capability and the client has enabled it via ), then the event will be emitted as well as the event (if the latter has changed). If the number of seen messages has changed, then the event may also be emitted. If the server does not support either the capability nor the capability and the client has not enabled the later capability via , then the server may choose only to notify the client of changes by emitting the event. AN IMAP event notification for folders that have been created, deleted, or renamed. These notifications are sent if an affected mailbox name was created, deleted, or renamed. As these notifications are received by the client, the appropriate will be emitted: , , or , respectively. If the server supports , granting or revocation of the right to the current user on the affected folder will also be considered folder creation or deletion, respectively. If a folder is created or deleted, the folder itself and its direct parent (whether it is an existing folder or not) are considered to be affected. An IMAP event notification for folders who have had their subscription status changed. This event requests that the server notifies the client of any subscription changes, causing the or events to be emitted accordingly on the affected . An IMAP event notification for changes to folder metadata. Support for this event type is OPTIONAL unless is supported by the server, in which case support for this event type is REQUIRED. If the server does support this event, then the event will be emitted whenever metadata changes for any folder included in the . An IMAP event notification for changes to server metadata. Support for this event type is OPTIONAL unless is supported by the server, in which case support for this event type is REQUIRED. If the server does support this event, then the event will be emitted whenever metadata changes. Initializes a new instance of the class. Initializes a new instance of the class. The name of the IMAP event. if the event is a message event; otherwise, . Get whether or not this is a message event. Gets whether or not this is a message event. if is message event; otherwise, . Get the name of the IMAP event. Gets the name of the IMAP event. The name of the IMAP event. Format the IMAP NOTIFY command for this particular IMAP mailbox filter. Formats the IMAP NOTIFY command for this particular IMAP mailbox filter. The IMAP engine. The IMAP command builder. The IMAP command argument builder. if the event is being registered for a or mailbox filter. An IMAP event notification for new or appended messages. An IMAP event notification for new or appended messages. If the new or appended message is in the selected folder, the folder will emit the event, followed by a event containing the information requested by the client. These events will not be emitted for any message created by the client on this particular folder as a result of, for example, a call to or . Initializes a new instance of the class. Initializes a new instance of the class. The fetch request to use when new messages arrive. is . Initializes a new instance of the class. Initializes a new instance of the class. The message summary items to automatically retrieve for new messages. Initializes a new instance of the class. Initializes a new instance of the class. The message summary items to automatically retrieve for new messages. Additional message headers to retrieve for new messages. is . One or more of the specified is invalid. Initializes a new instance of the class. Initializes a new instance of the class. The message summary items to automatically retrieve for new messages. Additional message headers to retrieve for new messages. is . One or more of the specified is invalid. Format the IMAP NOTIFY command for this particular IMAP mailbox filter. Formats the IMAP NOTIFY command for this particular IMAP mailbox filter. The IMAP engine. The IMAP command builder. The IMAP command argument builder. if the event is being registered for a or mailbox filter. An IMAP folder. An IMAP folder. Initializes a new instance of the class. Creates a new . If you subclass , you will also need to subclass and override the method in order to return a new instance of your ImapFolder subclass. The constructor arguments. is . Get the IMAP command engine. Gets the IMAP command engine. The engine. Get the encoded name of the folder. Gets the encoded name of the folder. The encoded name. Gets an object that can be used to synchronize access to the IMAP server. Gets an object that can be used to synchronize access to the IMAP server. When using the non-Async methods from multiple threads, it is important to lock the object for thread safety when using the synchronous methods. The lock object. Get the threading algorithms supported by the folder. Get the threading algorithms supported by the folder. The supported threading algorithms. Determine whether or not an supports a feature. Determines whether or not an supports a feature. The desired feature. if the feature is supported; otherwise, . Notifies the folder that a parent folder has been renamed. Updates the property. Gets a value indicating whether the folder is currently open. Gets a value indicating whether the folder is currently open. if the folder is currently open; otherwise, . Open the folder using the requested folder access. This variant of the method is meant for quick resynchronization of the folder. Before calling this method, the method MUST be called. You should also make sure to add listeners to the and events to get notifications of changes since the last time the folder was opened. The state of the folder. The requested folder access. The last known value. The last known value. The last known list of unique message identifiers. The cancellation token. is not a valid value. The has been disposed. The is not connected. The is not authenticated. The does not exist. The QRESYNC feature has not been enabled. The IMAP server does not support the QRESYNC extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously open the folder using the requested folder access. This variant of the method is meant for quick resynchronization of the folder. Before calling this method, the method MUST be called. You should also make sure to add listeners to the and events to get notifications of changes since the last time the folder was opened. The state of the folder. The requested folder access. The last known value. The last known value. The last known list of unique message identifiers. The cancellation token. is not a valid value. The has been disposed. The is not connected. The is not authenticated. The does not exist. The QRESYNC feature has not been enabled. The IMAP server does not support the QRESYNC extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Open the folder using the requested folder access. Opens the folder using the requested folder access. The state of the folder. The requested folder access. The cancellation token. is not a valid value. The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously open the folder using the requested folder access. Opens the folder using the requested folder access. The state of the folder. The requested folder access. The cancellation token. is not a valid value. The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Close the folder, optionally expunging the messages marked for deletion. Closes the folder, optionally expunging the messages marked for deletion. If set to , expunge. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously close the folder, optionally expunging the messages marked for deletion. Closes the folder, optionally expunging the messages marked for deletion. An asynchronous task context. If set to , expunge. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Create a new subfolder with the given name. Creates a new subfolder with the given name. The created folder. The name of the folder to create. if the folder will be used to contain messages; otherwise, . The cancellation token. is . is empty or invalid. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously create a new subfolder with the given name. Creates a new subfolder with the given name. The created folder. The name of the folder to create. if the folder will be used to contain messages; otherwise, . The cancellation token. is . is empty or invalid. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Create a new subfolder with the given name. Creates a new subfolder with the given name. The created folder. The name of the folder to create. A list of special uses for the folder being created. The cancellation token. is . -or- is . is empty or invalid. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The IMAP server does not support the CREATE-SPECIAL-USE extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously create a new subfolder with the given name. Creates a new subfolder with the given name. The created folder. The name of the folder to create. A list of special uses for the folder being created. The cancellation token. is . -or- is . is empty or invalid. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The IMAP server does not support the CREATE-SPECIAL-USE extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Rename the folder to exist with a new name under a new parent folder. Renames the folder to exist with a new name under a new parent folder. The new parent folder. The new name of the folder. The cancellation token. is . -or- is . does not belong to the . -or- is not a legal folder name. The has been disposed. The is not connected. The is not authenticated. The does not exist. The folder cannot be renamed (it is either a namespace or the Inbox). The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously rename the folder to exist with a new name under a new parent folder. Renames the folder to exist with a new name under a new parent folder. An awaitable task. The new parent folder. The new name of the folder. The cancellation token. is . -or- is . does not belong to the . -or- is not a legal folder name. The has been disposed. The is not connected. The is not authenticated. The does not exist. The folder cannot be renamed (it is either a namespace or the Inbox). The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Delete the folder on the IMAP server. Deletes the folder on the IMAP server. This method will not delete any child folders. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder cannot be deleted (it is either a namespace or the Inbox). The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously delete the folder on the IMAP server. Deletes the folder on the IMAP server. This method will not delete any child folders. An awaitable task. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder cannot be deleted (it is either a namespace or the Inbox). The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Subscribe the folder. Subscribes the folder. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously subscribe the folder. Subscribes the folder. An awaitable task. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Unsubscribe the folder. Unsubscribes the folder. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously unsubscribe the folder. Unsubscribes the folder. An awaitable task. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the subfolders. Gets the subfolders. The subfolders. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the subfolders. Gets the subfolders. The subfolders. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified subfolder. Gets the specified subfolder. The subfolder. The name of the subfolder. The cancellation token. is . is either an empty string or contains the . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The requested folder could not be found. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified subfolder. Gets the specified subfolder. The subfolder. The name of the subfolder. The cancellation token. is . is either an empty string or contains the . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The requested folder could not be found. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Force the server to sync its in-memory state with its disk state. The CHECK command forces the IMAP server to sync its in-memory state with its disk state. For more information about the CHECK command, see rfc350101. The cancellation token. The has been disposed. The is not currently open. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously force the server to sync its in-memory state with its disk state. The CHECK command forces the IMAP server to sync its in-memory state with its disk state. For more information about the CHECK command, see rfc350101. An awaitable task. The cancellation token. The has been disposed. The is not currently open. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Update the values of the specified items. Updates the values of the specified items. The method MUST NOT be used on a folder that is already in the opened state. Instead, other ways of getting the desired information should be used. For example, a common use for the method is to get the number of unread messages in the folder. When the folder is open, however, it is possible to use the method to query for the list of unread messages. For more information about the STATUS command, see rfc3501. The items to update. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The does not exist. The IMAP server does not support the STATUS command. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously update the values of the specified items. Updates the values of the specified items. The method MUST NOT be used on a folder that is already in the opened state. Instead, other ways of getting the desired information should be used. For example, a common use for the method is to get the number of unread messages in the folder. When the folder is open, however, it is possible to use the method to query for the list of unread messages. For more information about the STATUS command, see rfc3501. An awaitable task. The items to update. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The does not exist. The IMAP server does not support the STATUS command. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the complete access control list for the folder. Gets the complete access control list for the folder. The access control list. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the complete access control list for the folder. Gets the complete access control list for the folder. The access control list. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the access rights for a particular identifier. Gets the access rights for a particular identifier. The access rights. The identifier name. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the access rights for a particular identifier. Gets the access rights for a particular identifier. The access rights. The identifier name. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the access rights for the current authenticated user. Gets the access rights for the current authenticated user. The access rights. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the access rights for the current authenticated user. Gets the access rights for the current authenticated user. The access rights. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add access rights for the specified identity. Adds the given access rights for the specified identity. The identity name. The access rights. The cancellation token. is . -or- is . No rights were specified. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add access rights for the specified identity. Adds the given access rights for the specified identity. An asynchronous task context. The identity name. The access rights. The cancellation token. is . -or- is . No rights were specified. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove access rights for the specified identity. Removes the given access rights for the specified identity. The identity name. The access rights. The cancellation token. is . -or- is . No rights were specified. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove access rights for the specified identity. Removes the given access rights for the specified identity. An asynchronous task context. The identity name. The access rights. The cancellation token. is . -or- is . No rights were specified. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the access rights for the specified identity. Sets the access rights for the specified identity. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the access rights for the specified identity. Sets the access rights for the specified identity. An awaitable task. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove all access rights for the given identity. Removes all access rights for the given identity. The identity name. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove all access rights for the given identity. Removes all access rights for the given identity. An awaitable task. The identity name. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified metadata. Gets the specified metadata. The requested metadata value. The metadata tag. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the METADATA extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified metadata. Gets the specified metadata. The requested metadata value. The metadata tag. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the METADATA extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified metadata. Gets the specified metadata. The requested metadata. The metadata options. The metadata tags. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the METADATA extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified metadata. Gets the specified metadata. The requested metadata. The metadata options. The metadata tags. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the METADATA extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Set the specified metadata. Sets the specified metadata. The metadata. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the METADATA extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously set the specified metadata. Sets the specified metadata. An asynchronous task context. The metadata. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the METADATA extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Handles an untagged QUOTAROOT response. An asynchronous task. The IMAP engine. The IMAP command. The index. Whether or not asynchronous IO methods should be used. Handles an untagged QUOTA response. An asynchronous task. The IMAP engine. The IMAP command. The index. Whether or not asynchronous IO methods should be used. Get the quota information for the folder. Gets the quota information for the folder. To determine if a quotas are supported, check the property. The folder quota. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the QUOTA extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the quota information for the folder. Gets the quota information for the folder. To determine if a quotas are supported, check the property. The folder quota. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the QUOTA extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Set the quota limits for the folder. Sets the quota limits for the folder. To determine if a quotas are supported, check the property. The folder quota. If not , sets the maximum number of messages to allow. If not , sets the maximum storage size (in kilobytes). The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the QUOTA extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously set the quota limits for the folder. Sets the quota limits for the folder. To determine if a quotas are supported, check the property. The folder quota. If not , sets the maximum number of messages to allow. If not , sets the maximum storage size (in kilobytes). The cancellation token. The has been disposed. The is not connected. The is not authenticated. The IMAP server does not support the QUOTA extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Expunge the folder, permanently removing all messages marked for deletion. The EXPUNGE command permanently removes all messages in the folder that have the flag set. For more information about the EXPUNGE command, see rfc3501. Normally, a event will be emitted for each message that is expunged. However, if the IMAP server supports the QRESYNC extension and it has been enabled via the method, then the event will be emitted rather than the event. The cancellation token. The has been disposed. The is not currently open in read-write mode. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously expunge the folder, permanently removing all messages marked for deletion. The EXPUNGE command permanently removes all messages in the folder that have the flag set. For more information about the EXPUNGE command, see rfc3501. Normally, a event will be emitted for each message that is expunged. However, if the IMAP server supports the QRESYNC extension and it has been enabled via the method, then the event will be emitted rather than the event. An asynchronous task context. The cancellation token. The has been disposed. The is not currently open in read-write mode. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Expunge the specified uids, permanently removing them from the folder. Expunges the specified uids, permanently removing them from the folder. If the IMAP server supports the UIDPLUS extension (check the for the flag), then this operation is atomic. Otherwise, MailKit implements this operation by first searching for the full list of message uids in the folder that are marked for deletion, unmarking the set of message uids that are not within the specified list of uids to be be expunged, expunging the folder (thus expunging the requested uids), and finally restoring the deleted flag on the collection of message uids that were originally marked for deletion that were not included in the list of uids provided. For this reason, it is advisable for clients that wish to maintain state to implement this themselves when the IMAP server does not support the UIDPLUS extension. For more information about the UID EXPUNGE command, see rfc4315. Normally, a event will be emitted for each message that is expunged. However, if the IMAP server supports the QRESYNC extension and it has been enabled via the method, then the event will be emitted rather than the event. The message uids. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously expunge the specified uids, permanently removing them from the folder. Expunges the specified uids, permanently removing them from the folder. If the IMAP server supports the UIDPLUS extension (check the for the flag), then this operation is atomic. Otherwise, MailKit implements this operation by first searching for the full list of message uids in the folder that are marked for deletion, unmarking the set of message uids that are not within the specified list of uids to be be expunged, expunging the folder (thus expunging the requested uids), and finally restoring the deleted flag on the collection of message uids that were originally marked for deletion that were not included in the list of uids provided. For this reason, it is advisable for clients that wish to maintain state to implement this themselves when the IMAP server does not support the UIDPLUS extension. For more information about the UID EXPUNGE command, see rfc4315. Normally, a event will be emitted for each message that is expunged. However, if the IMAP server supports the QRESYNC extension and it has been enabled via the method, then the event will be emitted rather than the event. An asynchronous task context. The message uids. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Append a message to the folder. Appends a message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The formatting options. The append request. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- The request included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously append a message to the folder. Asynchronously appends a message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The formatting options. The append request. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- The request included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Append multiple messages to the folder. Appends multiple messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The formatting options. The append requests. The cancellation token. is . -or- is . One or more of the is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- One ore more requests included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously append multiple messages to the folder. Asynchronously appends multiple messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The formatting options. The append requests. The cancellation token. is . -or- is . One or more of the is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- One ore more requests included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The formatting options. The UID of the message to be replaced. The replace request. The cancellation token. is . -or- is . is invalid. -or- The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The formatting options. The UID of the message to be replaced. The replace request. The cancellation token. is . -or- is . is invalid. -or- The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The formatting options. The index of the message to be replaced. The replace request. The cancellation token. is . -or- is . is out of range. The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The formatting options. The index of the message to be replaced. The replace request. The cancellation token. is . -or- is . is out of range. The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Copy the specified messages to the destination folder. Copies the specified messages to the destination folder. The UID mapping of the messages in the destination folder, if available; otherwise an empty mapping. The UIDs of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. does not exist. The is not currently open. The IMAP server does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously copy the specified messages to the destination folder. Copies the specified messages to the destination folder. The UID mapping of the messages in the destination folder, if available; otherwise an empty mapping. The UIDs of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. does not exist. The is not currently open. The IMAP server does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Move the specified messages to the destination folder. Moves the specified messages to the destination folder. If the IMAP server supports the MOVE extension (check the property for the flag), then this operation will be atomic. Otherwise, MailKit implements this by first copying the messages to the destination folder, then marking them for deletion in the originating folder, and finally expunging them (see for more information about how a subset of messages are expunged). Since the server could disconnect at any point between those 3 (or more) commands, it is advisable for clients to implement their own logic for moving messages when the IMAP server does not support the MOVE command in order to better handle spontaneous server disconnects and other error conditions. The UID mapping of the messages in the destination folder, if available; otherwise an empty mapping. The UIDs of the messages to move. The destination folder. The cancellation token. is . -or- is . is empty. -or- One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously move the specified messages to the destination folder. Moves the specified messages to the destination folder. If the IMAP server supports the MOVE extension (check the property for the flag), then this operation will be atomic. Otherwise, MailKit implements this by first copying the messages to the destination folder, then marking them for deletion in the originating folder, and finally expunging them (see for more information about how a subset of messages are expunged). Since the server could disconnect at any point between those 3 (or more) commands, it is advisable for clients to implement their own logic for moving messages when the IMAP server does not support the MOVE command in order to better handle spontaneous server disconnects and other error conditions. The UID mapping of the messages in the destination folder, if available; otherwise an empty mapping. The UIDs of the messages to move. The destination folder. The cancellation token. is . -or- is . is empty. -or- One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Copy the specified messages to the destination folder. Copies the specified messages to the destination folder. The indexes of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not currently open. The is not connected. The is not authenticated. does not exist. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously copy the specified messages to the destination folder. Copies the specified messages to the destination folder. An awaitable task. The indexes of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not currently open. The is not connected. The is not authenticated. does not exist. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Move the specified messages to the destination folder. If the IMAP server supports the MOVE command, then the MOVE command will be used. Otherwise, the messages will first be copied to the destination folder and then marked as \Deleted in the originating folder. Since the server could disconnect at any point between those 2 operations, it may be advisable to implement your own logic for moving messages in this case in order to better handle spontaneous server disconnects and other error conditions. The indexes of the messages to move. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously move the specified messages to the destination folder. If the IMAP server supports the MOVE command, then the MOVE command will be used. Otherwise, the messages will first be copied to the destination folder and then marked as \Deleted in the originating folder. Since the server could disconnect at any point between those 2 operations, it may be advisable to implement your own logic for moving messages in this case in order to better handle spontaneous server disconnects and other error conditions. An awaitable task. The indexes of the messages to move. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get an enumerator for the messages in the folder. Gets an enumerator for the messages in the folder. The enumerator. The has been disposed. The is not connected. The is not authenticated. The is not currently open. Store the annotations for the specified messages. Stores the annotations for the specified messages. The UIDs of the messages. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously store the annotations for the specified messages. Asynchronously stores the annotations for the specified messages. An asynchronous task context. The UIDs of the messages. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Store the annotations for the specified messages only if their mod-sequence value is less than the specified value. Stores the annotations for the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The UIDs of the messages. The mod-sequence value. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. -or- The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously store the annotations for the specified messages only if their mod-sequence value is less than the specified value. Asynchronously stores the annotations for the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The UIDs of the messages. The mod-sequence value. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. -or- The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Store the annotations for the specified messages. Stores the annotations for the specified messages. The indexes of the messages. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously store the annotations for the specified messages. Asynchronously stores the annotations for the specified messages. An asynchronous task context. The indexes of the messages. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Store the annotations for the specified messages only if their mod-sequence value is less than the specified value. Stores the annotations for the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The indexes of the messages. The mod-sequence value. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. -or- The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously store the annotations for the specified messages only if their mod-sequence value is less than the specified value. Asynchronously stores the annotations for the specified messages only if their mod-sequence value is less than the specified value.s The indexes of the messages that were not updated. The indexes of the messages. The mod-sequence value. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. -or- The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Fetches the message summaries for the specified message UIDs. Fetches the message summaries for the specified message UIDs. It should be noted that if another client has modified any message in the folder, the IMAP server may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The UIDs. The fetch request. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not currently open. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. The does not support mod-sequences. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously fetches the message summaries for the specified message UIDs. Fetches the message summaries for the specified message UIDs. It should be noted that if another client has modified any message in the folder, the IMAP server may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The UIDs. The fetch request. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not currently open. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. The does not support mod-sequences. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Fetches the message summaries for the specified message indexes. Fetches the message summaries for the specified message indexes. It should be noted that if another client has modified any message in the folder, the IMAP server may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The indexes. The fetch request. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not currently open. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. The does not support mod-sequences. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously fetches the message summaries for the specified message indexes. Fetches the message summaries for the specified message indexes. It should be noted that if another client has modified any message in the folder, the IMAP server may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The indexes. The fetch request. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not currently open. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. The does not support mod-sequences. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Fetches the message summaries for the messages between the two indexes, inclusive. Fetches the message summaries for the messages between the two indexes, inclusive. It should be noted that if another client has modified any message in the folder, the IMAP server may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The minimum index. The maximum index, or -1 to specify no upper bound. The fetch request. The cancellation token. is out of range. -or- is out of range. is . The has been disposed. The is not currently open. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. The does not support mod-sequences. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously fetches the message summaries for the messages between the two indexes, inclusive. Fetches the message summaries for the messages between the two indexes, inclusive. It should be noted that if another client has modified any message in the folder, the IMAP server may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The minimum index. The maximum index, or -1 to specify no upper bound. The fetch request. The cancellation token. is out of range. -or- is out of range. is . The has been disposed. The is not currently open. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. The does not support mod-sequences. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Create a backing stream for use with the GetMessage, GetBodyPart, and GetStream methods. Allows subclass implementations to override the type of stream created for use with the GetMessage, GetBodyPart and GetStream methods. This could be useful for subclass implementations that intend to implement support for caching and/or for subclass implementations that want to use temporary file streams instead of memory-based streams for larger amounts of message data. Subclasses that implement caching using this API should wait for before adding the stream to their cache. Streams returned by this method SHOULD clean up any allocated resources such as deleting temporary files from the file system. The will not be available for the various GetMessage(), GetBodyPart() and GetStream() methods that take a message index rather than a . It may also not be available if the IMAP server response does not specify the UID value prior to sending the literal-string token containing the message stream. The stream. The unique identifier of the message, if available. The section of the message that is being fetched. The starting offset of the message section being fetched. The length of the stream being fetched, measured in bytes. Commit a stream returned by . Commits a stream returned by . This method is called only after both the message data has successfully been written to the stream returned by and a has been obtained for the associated message. For subclasses implementing caching, this method should be used for committing the stream to their cache. Subclass implementations may take advantage of the fact that allows returning a new reference if they move a file on the file system and wish to return a new based on the new path, for example. The stream. The stream. The unique identifier of the message. The section of the message that the stream represents. The starting offset of the message section. The length of the stream, measured in bytes. Get the specified message headers. Gets the specified message headers. The message headers. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified message headers. Gets the specified message headers. The message headers. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified body part headers. Gets the specified body part headers. The body part headers. The UID of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified body part headers. Gets the specified body part headers. The body part headers. The UID of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified body part headers. Gets the specified body part headers. The body part headers. The UID of the message. The body part. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified body part headers. Gets the specified body part headers. The body part headers. The UID of the message. The body part. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified message headers. Gets the specified message headers. The message headers. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified message headers. Gets the specified message headers. The message headers. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified body part headers. Gets the specified body part headers. The body part headers. The index of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is out of range. is . The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified body part headers. Gets the specified body part headers. The body part headers. The index of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is out of range. is . The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified body part headers. Gets the specified body part headers. The body part headers. The index of the message. The body part. The cancellation token. The progress reporting mechanism. is out of range. is . The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified body part headers. Gets the specified body part headers. The body part headers. The index of the message. The body part. The cancellation token. The progress reporting mechanism. is out of range. is . The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified message. Gets the specified message. The message. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified message. Gets the specified message. The message. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified message. Gets the specified message. The message. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified message. Gets the specified message. The message. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified body part. Gets the specified body part. For more information about how to construct the , see RFC3501, Section 6.4.5. The body part. The UID of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified body part. Gets the specified body part. For more information about how to construct the , see RFC3501, Section 6.4.5. The body part. The UID of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified body part. Gets the specified body part. The body part. The UID of the message. The body part. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified body part. Gets the specified body part. The body part. The UID of the message. The body part. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified body part. Gets the specified body part. For more information about how to construct the , see RFC3501, Section 6.4.5. The body part. The index of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified body part. Gets the specified body part. For more information about how to construct the , see RFC3501, Section 6.4.5. The body part. The index of the message. The body part specifier. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the specified body part. Gets the specified body part. The body part. The index of the message. The body part. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the specified body part. Gets the specified body part. The body part. The index of the message. The body part. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get a substream of the specified message. Fetches a substream of the message. If the starting offset is beyond the end of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the message, the stream will end where the message ends. The stream. The UID of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously gets a substream of the specified message. Fetches a substream of the message. If the starting offset is beyond the end of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the message, the stream will end where the message ends. The stream. The UID of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get a substream of the specified message. Fetches a substream of the message. If the starting offset is beyond the end of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the message, a truncated stream will be returned. The stream. The index of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously gets a substream of the specified message. Fetches a substream of the message. If the starting offset is beyond the end of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the message, a truncated stream will be returned. The stream. The index of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get a substream of the specified body part. Gets a substream of the specified message. For more information about how to construct the , see RFC3501, Section 6.4.5. The stream. The UID of the message. The desired section of the message. The cancellation token. The progress reporting mechanism. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously gets a substream of the specified body part. Gets a substream of the specified message. For more information about how to construct the , see RFC3501, Section 6.4.5. The stream. The UID of the message. The desired section of the message. The cancellation token. The progress reporting mechanism. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get a substream of the specified message. Gets a substream of the specified message. If the starting offset is beyond the end of the specified section of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the section, a truncated stream will be returned. For more information about how to construct the , see RFC3501, Section 6.4.5. The stream. The UID of the message. The desired section of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is . is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously gets a substream of the specified message. Gets a substream of the specified message. If the starting offset is beyond the end of the specified section of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the section, a truncated stream will be returned. For more information about how to construct the , see RFC3501, Section 6.4.5. The stream. The UID of the message. The desired section of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is . is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get a substream of the specified message. Gets a substream of the specified message. For more information about how to construct the , see RFC3501, Section 6.4.5. The stream. The index of the message. The desired section of the message. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously gets a substream of the specified message. Gets a substream of the specified message. For more information about how to construct the , see RFC3501, Section 6.4.5. The stream. The index of the message. The desired section of the message. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get a substream of the specified message. Gets a substream of the specified message. If the starting offset is beyond the end of the specified section of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the section, a truncated stream will be returned. For more information about how to construct the , see RFC3501, Section 6.4.5. The stream. The index of the message. The desired section of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is . is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously gets a substream of the specified message. Gets a substream of the specified message. If the starting offset is beyond the end of the specified section of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the section, a truncated stream will be returned. For more information about how to construct the , see RFC3501, Section 6.4.5. The stream. The index of the message. The desired section of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is . is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The IMAP server did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the streams for the specified messages. Gets the streams for the specified messages. The uids of the messages. A callback method that gets called for each stream as it is received. The cancellation token. The progress reporting mechanism. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the streams for the specified messages. Asynchronously gets the streams for the specified messages. An awaitable task. The uids of the messages. A callback method that gets called for each stream as it is received. The cancellation token. The progress reporting mechanism. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the streams for the specified messages. Gets the streams for the specified messages. The indexes of the messages. A callback method that gets called for each stream as it is received. The cancellation token. The progress reporting mechanism. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the streams for the specified messages. Asynchronously gets the streams for the specified messages. An awaitable task. The indexes of the messages. A callback method that gets called for each stream as it is received. The cancellation token. The progress reporting mechanism. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Get the streams for the specified messages. Gets the streams for the specified messages. The minimum index. The maximum index, or -1 to specify no upper bound. A callback method that gets called for each stream as it is received. The cancellation token. The progress reporting mechanism. is out of range. -or- is out of range. is . The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously get the streams for the specified messages. Asynchronously gets the streams for the specified messages. An awaitable task. The minimum index. The maximum index, or -1 to specify no upper bound. A callback method that gets called for each stream as it is received. The cancellation token. The progress reporting mechanism. is out of range. -or- is out of range. is . The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Store message flags and keywords for a set of messages. Updates the message flags and keywords for a set of messages. The UIDs of the messages that were not updated. The message UIDs. The message flags and keywords to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. The specified an value but the does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously store message flags and keywords for a set of messages. Asynchronously updates the message flags and keywords for a set of messages. The UIDs of the messages that were not updated. The message UIDs. The message flags and keywords to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. The specified an value but the does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Store message flags and keywords for a set of messages. Updates the message flags and keywords for a set of message. The indexes of the messages that were not updated. The message indexes. The message flags and keywords to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. The specified an value but the does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously store message flags and keywords for a set of messages. Asynchronously updates the message flags and keywords for a set of messages. The indexes of the messages that were not updated. The message indexes. The message flags and keywords to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. The specified an value but the does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Store GMail-style labels for a set of messages. Updates the GMail-style labels for a set of messages. The UIDs of the messages that were not updated. The message UIDs. The GMail-style labels to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. The specified an value but the does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously store GMail-style labels for a set of messages. Asynchronously updates the GMail-style labels for a set of messages. The UIDs of the messages that were not updated. The message UIDs. The GMail-style labels to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. The specified an value but the does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Store GMail-style labels for a set of messages. Updates the GMail-style labels for a set of message. The indexes of the messages that were not updated. The message indexes. The GMail-style labels to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. The specified an value but the does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously store GMail-style labels for a set of messages. Asynchronously updates the GMail-style labels for a set of messages. The indexes of the messages that were not updated. The message indexes. The GMail-style labels to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. The specified an value but the does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Search the folder for messages matching the specified query. Sends a UID SEARCH command with the specified query passed directly to the IMAP server with no interpretation by MailKit. This means that the query may contain any arguments that a UID SEARCH command is allowed to have according to the IMAP specifications and any extensions that are supported, including RETURN parameters. An array of matching UIDs. The search query. The cancellation token. is . is an empty string. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously search the folder for messages matching the specified query. Sends a UID SEARCH command with the specified query passed directly to the IMAP server with no interpretation by MailKit. This means that the query may contain any arguments that a UID SEARCH command is allowed to have according to the IMAP specifications and any extensions that are supported, including RETURN parameters. An array of matching UIDs. The search query. The cancellation token. is . is an empty string. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Search the folder for messages matching the specified query. Searches the folder for messages matching the specified query, returning only the specified search results. The search results. The search options. The search query. The cancellation token. is . One or more search terms in the are not supported by the IMAP server. -or- The IMAP server does not support the ESEARCH extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously search the folder for messages matching the specified query. Searches the folder for messages matching the specified query, returning only the specified search results. The search results. The search options. The search query. The cancellation token. is . One or more search terms in the are not supported by the IMAP server. -or- The IMAP server does not support the ESEARCH extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Sort messages matching the specified query. Sends a UID SORT command with the specified query passed directly to the IMAP server with no interpretation by MailKit. This means that the query may contain any arguments that a UID SORT command is allowed to have according to the IMAP specifications and any extensions that are supported, including RETURN parameters. An array of matching UIDs. The search query. The cancellation token. is . is an empty string. The IMAP server does not support the SORT extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously sort messages matching the specified query. Sends a UID SORT command with the specified query passed directly to the IMAP server with no interpretation by MailKit. This means that the query may contain any arguments that a UID SORT command is allowed to have according to the IMAP specifications and any extensions that are supported, including RETURN parameters. An array of matching UIDs. The search query. The cancellation token. is . is an empty string. The IMAP server does not support the SORT extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Sort messages matching the specified query. The returned array of unique identifiers will be sorted in the preferred order and can be used with . An array of matching UIDs in the specified sort order. The search query. The sort order. The cancellation token. is . -or- is . is empty. One or more search terms in the are not supported by the IMAP server. -or- The server does not support the SORT extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously sort messages matching the specified query. The returned array of unique identifiers will be sorted in the preferred order and can be used with . An array of matching UIDs in the specified sort order. The search query. The sort order. The cancellation token. is . -or- is . is empty. One or more search terms in the are not supported by the IMAP server. -or- The server does not support the SORT extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Sort messages matching the specified query. Searches the folder for messages matching the specified query, returning the search results in the specified sort order. The search results. The search options. The search query. The sort order. The cancellation token. is . -or- is . is empty. One or more search terms in the are not supported by the IMAP server. -or- The IMAP server does not support the ESORT extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously sort messages matching the specified query. Searches the folder for messages matching the specified query, returning the search results in the specified sort order. The search results. The search options. The search query. The sort order. The cancellation token. is . -or- is . is empty. One or more search terms in the are not supported by the IMAP server. -or- The IMAP server does not support the ESORT extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Thread the messages in the folder that match the search query using the specified threading algorithm. The can be used with methods such as . An array of message threads. The threading algorithm to use. The search query. The cancellation token. is not supported. is . One or more search terms in the are not supported by the IMAP server. -or- The server does not support the THREAD extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously thread the messages in the folder that match the search query using the specified threading algorithm. The can be used with methods such as . An array of message threads. The threading algorithm to use. The search query. The cancellation token. is not supported. is . One or more search terms in the are not supported by the IMAP server. -or- The server does not support the THREAD extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Thread the messages in the folder that match the search query using the specified threading algorithm. The can be used with methods such as . An array of message threads. The subset of UIDs The threading algorithm to use. The search query. The cancellation token. is not supported. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported by the IMAP server. -or- The server does not support the THREAD extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously thread the messages in the folder that match the search query using the specified threading algorithm. The can be used with methods such as . An array of message threads. The subset of UIDs The threading algorithm to use. The search query. The cancellation token. is not supported. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported by the IMAP server. -or- The server does not support the THREAD extension. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Constructor arguments for . Constructor arguments for . The are meant only to allow subclassing of by overriding the method. Initializes a new instance of the class. The IMAP command engine. The encoded name. The attributes. The directory separator. Get the folder attributes. Gets the folder attributes. The folder attributes. Get the directory separator. Gets the directory separator. The directory separator. Get the full name of the folder. This is the equivalent of the full path of a file on a file system. The full name of the folder. Get the name of the folder. This is the equivalent of the file name of a file on the file system. The name of the folder. An IMAP IDLE context. An IMAP IDLE command does not work like normal commands. Unlike most commands, the IDLE command does not end until the client sends a separate "DONE" command. In order to facilitate this, the way this works is that the consumer of MailKit's IMAP APIs provides a 'doneToken' which signals to the command-processing loop to send the "DONE" command. Since, like every other IMAP command, it is also necessary to provide a means of cancelling the IDLE command, it becomes necessary to link the 'doneToken' and the 'cancellationToken' together. Initializes a new instance of the class. Creates a new . The IMAP engine. The done token. The cancellation token. Get the engine. Gets the engine. The engine. Get the cancellation token. Get the cancellation token. The cancellation token. Get the done token. Gets the done token. The done token. Callback method to be used as the ImapCommand's ContinuationHandler. Callback method to be used as the ImapCommand's ContinuationHandler. The ImapEngine. The ImapCommand. The text. if the command is being run asynchronously; otherwise, . Releases all resource used by the object. Call when you are finished using the . The method leaves the in an unusable state. After calling , you must release all references to the so the garbage collector can reclaim the memory that the was occupying. The details of an IMAP client or server implementation. Allows an IMAP client and server to share their implementation details with each other for the purposes of debugging. Initializes a new instance of the class. Creates a new . Get the identification properties. Gets the dictionary of raw identification properties. The properties. Get or set the name of the program. Gets or sets the name of the program. The program name. Get or set the version of the program. Gets or sets the version of the program. The program version. Get or set the name of the operating system. Gets or sets the name of the operating system. The name of the operation system. Get or set the version of the operating system. Gets or sets the version of the operating system. The version of the operation system. Get or set the name of the vendor. Gets or sets the name of the vendor. The name of the vendor. Get or set the support URL. Gets or sets the support URL. The support URL. Get or set the postal address of the vendor. Gets or sets the postal address of the vendor. The postal address. Get or set the release date of the program. Gets or sets the release date of the program. The release date. Get or set the command used to start the program. Gets or sets the command used to start the program. The command used to start the program. Get or set the command-line arguments used to start the program. Gets or sets the command-line arguments used to start the program. The command-line arguments used to start the program. Get or set the environment variables available to the program. Get or set the environment variables available to the program. The environment variables. An IMAP literal object. The literal can be a string, byte[], Stream, or a MimeMessage. Initializes a new instance of the class. Creates a new . The formatting options. The message. The progress update action. Initializes a new instance of the class. Creates a new . The formatting options. The literal. Get the length of the literal, in bytes. Gets the length of the literal, in bytes. The length. Write the literal to the specified stream. Writes the literal to the specified stream. The stream. The cancellation token. Asynchronously write the literal to the specified stream. Asynchronously writes the literal to the specified stream. The stream. The cancellation token. An IMAP protocol exception. The exception that is thrown when there is an error communicating with an IMAP server. An is typically fatal and requires the to be reconnected. Initializes a new instance of the class. Creates a new from the serialized data. The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The error message. An inner exception. Initializes a new instance of the class. Creates a new . The error message. Initializes a new instance of the class. Creates a new . Gets or sets whether or not this exception was thrown due to an unexpected token. Gets or sets whether or not this exception was thrown due to an unexpected token. if an unexpected token was encountered; otherwise, . An enumeration of the possible IMAP streaming modes. Normal operation is done in the mode, but when reading literal string data, the mode should be used. Reads 1 token at a time. Reads literal string data. Initializes a new instance of the class. Creates a new . The underlying network stream. The protocol logger. Get or sets the underlying network stream. Gets or sets the underlying network stream. The underlying network stream. Get or sets the mode used for reading. Gets or sets the mode used for reading. The mode. Get the length of the literal. Gets the length of the literal. The length of the literal. Get whether or not the stream is connected. Gets whether or not the stream is connected. if the stream is connected; otherwise, . Get whether the stream supports reading. Gets whether the stream supports reading. if the stream supports reading; otherwise, . Get whether the stream supports writing. Gets whether the stream supports writing. if the stream supports writing; otherwise, . Get whether the stream supports seeking. Gets whether the stream supports seeking. if the stream supports seeking; otherwise, . Get whether the stream supports I/O timeouts. Gets whether the stream supports I/O timeouts. if the stream supports I/O timeouts; otherwise, . Get or set a value, in milliseconds, that determines how long the stream will attempt to read before timing out. Gets or sets a value, in milliseconds, that determines how long the stream will attempt to read before timing out. A value, in milliseconds, that determines how long the stream will attempt to read before timing out. The read timeout. Get or set a value, in milliseconds, that determines how long the stream will attempt to write before timing out. Gets or sets a value, in milliseconds, that determines how long the stream will attempt to write before timing out. A value, in milliseconds, that determines how long the stream will attempt to write before timing out. The write timeout. Get or set the position within the current stream. Gets or sets the position within the current stream. The current position within the stream. The position of the stream. An I/O error occurred. The stream does not support seeking. The stream has been disposed. Get the length of the stream, in bytes. Gets the length of the stream, in bytes. A long value representing the length of the stream in bytes. The length of the stream. The stream does not support seeking. The stream has been disposed. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if the end of the stream has been reached. The buffer. The buffer offset. The number of bytes to read. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream is in token mode (see ). The operation was canceled via the cancellation token. An I/O error occurred. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if the end of the stream has been reached. The buffer. The buffer offset. The number of bytes to read. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream is in token mode (see ). An I/O error occurred. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if the end of the stream has been reached. The buffer. The buffer offset. The number of bytes to read. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Reads the next available token from the stream. The token. The special characters that are not allowed in an atom token. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Asynchronously reads the next available token from the stream. The token. The special characters that are not allowed in an atom token. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Reads the next available token from the stream. The token. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Asynchronously reads the next available token from the stream. The token. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Ungets a token. The token. Reads a single line of input from the stream. This method should be called in a loop until it returns . , if reading the line is complete, otherwise. The output buffer write the line data into. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Asynchronously reads a single line of input from the stream. This method should be called in a loop until it returns . , if reading the line is complete, otherwise. The output buffer write the line data into. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. The buffer to write. The offset of the first byte to write. The number of bytes to write. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream does not support writing. The operation was canceled via the cancellation token. An I/O error occurred. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. The buffer to write. The offset of the first byte to write. The number of bytes to write. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream does not support writing. An I/O error occurred. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. A task that represents the asynchronous write operation. The buffer to write. The offset of the first byte to write. The number of bytes to write. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream does not support writing. The operation was canceled via the cancellation token. An I/O error occurred. Clears all output buffers for this stream and causes any buffered data to be written to the underlying device. Clears all output buffers for this stream and causes any buffered data to be written to the underlying device. The cancellation token. The stream has been disposed. The stream does not support writing. The operation was canceled via the cancellation token. An I/O error occurred. Clears all output buffers for this stream and causes any buffered data to be written to the underlying device. Clears all output buffers for this stream and causes any buffered data to be written to the underlying device. The stream has been disposed. The stream does not support writing. An I/O error occurred. Clears all buffers for this stream and causes any buffered data to be written to the underlying device. Clears all buffers for this stream and causes any buffered data to be written to the underlying device. A task that represents the asynchronous flush operation. The cancellation token. The stream has been disposed. The stream does not support writing. The operation was canceled via the cancellation token. An I/O error occurred. Sets the position within the current stream. It is not possible to seek within a . The new position within the stream. The offset into the stream relative to the . The origin to seek from. The stream does not support seeking. Sets the length of the stream. It is not possible to set the length of a . The desired length of the stream in bytes. The stream does not support setting the length. Releases the unmanaged resources used by the and optionally releases the managed resources. Releases the unmanaged resources used by the and optionally releases the managed resources. to release both managed and unmanaged resources; to release only the unmanaged resources. IMAP utility functions. Formats a date in a format suitable for use with the APPEND command. The formatted date string. The date. Parses the internal date string. The date. The text to parse. Formats a list of annotations for a STORE or APPEND command. The command builder. The annotations. the argument list. Throw an exception if there are any annotations without properties. Formats the array of indexes as a string suitable for use with IMAP commands. The IMAP engine. The string builder. The indexes. is . -or- is . -or- is . One or more of the indexes has a negative value. Formats the array of indexes as a string suitable for use with IMAP commands. The index set. The IMAP engine. The indexes. is . -or- is . One or more of the indexes has a negative value. Parses an untagged ID response. The IMAP engine. The IMAP command. Asynchronously parses an untagged ID response. The IMAP engine. The IMAP command. Handles an untagged ID response. An asynchronous task. The IMAP engine. The IMAP command. The index. Whether or not asynchronous IO methods should be used. Canonicalize the name of the mailbox. Canonicalizes the name of the mailbox by replacing various capitalizations of "INBOX" with the literal "INBOX" string. The mailbox name. The encoded mailbox name. The directory separator. Determines whether the specified mailbox is the Inbox. if the specified mailbox name is the Inbox; otherwise, . The mailbox name. Parses an untagged LIST or LSUB response. The IMAP engine. The list of folders to be populated. if it is an LSUB response; otherwise, . if the LIST response is expected to return \Subscribed flags; otherwise, . The cancellation token. Asynchronously parses an untagged LIST or LSUB response. The IMAP engine. The list of folders to be populated. if it is an LSUB response; otherwise, . if the LIST response is expected to return \Subscribed flags; otherwise, . The cancellation token. Handles an untagged LIST or LSUB response. The IMAP engine. The IMAP command. The index. Whether or not asynchronous IO methods should be used. Parses an untagged METADATA response. The encoded name of the folder that the metadata belongs to. The IMAP engine. The metadata collection to be populated. The cancellation token. Asynchronously parses an untagged METADATA response. The encoded name of the folder that the metadata belongs to. The IMAP engine. The metadata collection to be populated. The cancellation token. Handles an untagged METADATA response. The IMAP engine. The IMAP command. The index. Whether or not asynchronous IO methods should be used. Parses the ENVELOPE parenthesized list. The envelope. The IMAP engine. The cancellation token. Parses the ENVELOPE parenthesized list. The envelope. The IMAP engine. The cancellation token. Formats a flags list suitable for use with the APPEND command. The message flags. The string builder. The number of keywords. Formats a flags list suitable for use with the APPEND command. The flags list string. The message flags. The number of keywords. Parses the flags list. The message flags. The IMAP engine. The name of the flags being parsed. A hash set of user-defined message flags that will be populated if non-null. The cancellation token. Parses the flags list. The message flags. The IMAP engine. The name of the flags being parsed. A hash set of user-defined message flags that will be populated if non-null. The cancellation token. Parses the ANNOTATION list. The list of annotations. The IMAP engine. The cancellation token. Parses the ANNOTATION list. The list of annotations. The IMAP engine. The cancellation token. Parses the X-GM-LABELS list. The message labels. The IMAP engine. The cancellation token. Parses the X-GM-LABELS list. The message labels. The IMAP engine. The cancellation token. Parses an untagged THREAD response. The task. The IMAP engine. The UIDVALIDITY of the folder. The list of message threads that this method will append to. The cancellation token. Parses the threads. The task. The IMAP engine. The UIDVALIDITY of the folder. THe list of message threads that will be appended to. The cancellation token. Handles an untagged THREAD response. The task. The IMAP engine. The IMAP command. THe index. Whether or not asynchronous IO methods should be used. A POP3 client that can be used to retrieve messages from a server. The class supports both the "pop" and "pops" protocols. The "pop" protocol makes a clear-text connection to the POP3 server and does not use SSL or TLS unless the POP3 server supports the STLS extension. The "pops" protocol, however, connects to the POP3 server using an SSL-wrapped connection. Asynchronously authenticate using the specified SASL mechanism. Authenticates using the specified SASL mechanism. For a list of available SASL authentication mechanisms supported by the server, check the property after the service has been connected. An asynchronous task context. The SASL mechanism. The cancellation token. is . The has been disposed. The is not connected. The is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A POP3 command failed. An POP3 protocol error occurred. Asynchronously authenticates using the supplied credentials. Asynchronously authenticates using the supplied credentials. If the POP3 server supports the APOP authentication mechanism, then APOP is used. If the APOP authentication mechanism is not supported and the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the USER and PASS commands are used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. In the case of the APOP authentication mechanism, remove it from the property instead. An asynchronous task context. The text encoding to use for the user's credentials. The user's credentials. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A POP3 command failed. An POP3 protocol error occurred. Asynchronously establish a connection to the specified POP3 or POP3/S server. Establishes a connection to the specified POP3 or POP3/S server. If the has a value of 0, then the parameter is used to determine the default port to connect to. The default port used with is 995. All other values will use a default port of 110. If the has a value of , then the is used to determine the default security options. If the has a value of 995, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. An asynchronous task context. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. The operation was canceled via the cancellation token. was set to and the POP3 server does not support the STLS extension. A socket error occurred trying to connect to the remote host. An error occurred during the SSL/TLS negotiations. An I/O error occurred. A POP3 command failed. A POP3 protocol error occurred. Asynchronously establish a connection to the specified POP3 or POP3/S server using the provided socket. Establishes a connection to the specified POP3 or POP3/S server using the provided socket. If the has a value of , then the is used to determine the default security options. If the has a value of 995, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. With the exception of using the to determine the default to use when the value is , the and parameters are only used for logging purposes. An asynchronous task context. The socket to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. is not connected. -or- The is a zero-length string. The has been disposed. The is already connected. was set to and the POP3 server does not support the STLS extension. The operation was canceled via the cancellation token. An error occurred during the SSL/TLS negotiations. An I/O error occurred. A POP3 command failed. A POP3 protocol error occurred. Asynchronously establish a connection to the specified POP3 or POP3/S server using the provided stream. Establishes a connection to the specified POP3 or POP3/S server using the provided stream. If the has a value of , then the is used to determine the default security options. If the has a value of 995, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. With the exception of using the to determine the default to use when the value is , the and parameters are only used for logging purposes. An asynchronous task context. The socket to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. was set to and the POP3 server does not support the STLS extension. The operation was canceled via the cancellation token. An error occurred during the SSL/TLS negotiations. An I/O error occurred. A POP3 command failed. A POP3 protocol error occurred. Asynchronously disconnect the service. If is , a QUIT command will be issued in order to disconnect cleanly. An asynchronous task context. If set to , a QUIT command will be issued in order to disconnect cleanly. The cancellation token. The has been disposed. Asynchronously get the message count. Asynchronously gets the message count. The message count. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Ping the POP3 server to keep the connection alive. Mail servers, if left idle for too long, will automatically drop the connection. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously enable UTF8 mode. The POP3 UTF8 extension allows the client to retrieve messages in the UTF-8 encoding and may also allow the user to authenticate using a UTF-8 encoded username or password. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The has already been authenticated. The operation was canceled via the cancellation token. The POP3 server does not support the UTF8 extension. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the list of languages supported by the POP3 server. If the POP3 server supports the LANG extension, it is possible to query the list of languages supported by the POP3 server that can be used for error messages. The supported languages. The cancellation token. The has been disposed. The is not connected. The operation was canceled via the cancellation token. The POP3 server does not support the LANG extension. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously set the language used by the POP3 server for error messages. If the POP3 server supports the LANG extension, it is possible to set the language used by the POP3 server for error messages. An asynchronous task context. The language code. The cancellation token. is . is empty. The has been disposed. The is not connected. The operation was canceled via the cancellation token. The POP3 server does not support the LANG extension. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the UID of the message at the specified index. Gets the UID of the message at the specified index. Not all servers support UIDs, so you should first check the property for the flag or the convenience property. The message UID. The message index. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the full list of available message UIDs. Gets the full list of available message UIDs. Not all servers support UIDs, so you should first check the property for the flag or the convenience property. The message uids. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the size of the specified message, in bytes. Gets the size of the specified message, in bytes. The message size, in bytes. The index of the message. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the sizes for all available messages, in bytes. Gets the sizes for all available messages, in bytes. The message sizes, in bytes. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the headers for the message at the specified index. Gets the headers for the message at the specified index. The message headers. The index of the message. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the headers for the messages at the specified indexes. Gets the headers for the messages at the specified indexes. When the POP3 server supports the extension, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The headers for the specified messages. The indexes of the messages. The cancellation token. is . One or more of the are invalid. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the headers of the messages within the specified range. Gets the headers of the messages within the specified range. When the POP3 server supports the extension, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The headers of the messages within the specified range. The index of the first message to get. The number of messages to get. The cancellation token. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the message at the specified index. Gets the message at the specified index. The message. The index of the message. The cancellation token. The progress reporting mechanism. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the messages at the specified indexes. Gets the messages at the specified indexes. When the POP3 server supports the extension, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The messages. The indexes of the messages. The cancellation token. The progress reporting mechanism. is . One or more of the are invalid. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the messages within the specified range. Gets the messages within the specified range. When the POP3 server supports the extension, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The messages. The index of the first message to get. The number of messages to get. The cancellation token. The progress reporting mechanism. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the message or header stream at the specified index. Gets the message or header stream at the specified index. The message or header stream. The index of the message. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the message or header streams at the specified indexes. Get the message or header streams at the specified indexes. If the POP3 server supports the extension, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The message or header streams. The indexes of the messages. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. is . One or more of the are invalid. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the message or header streams within the specified range. Gets the message or header streams within the specified range. If the POP3 server supports the extension, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The message or header streams. The index of the first stream to get. The number of streams to get. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously mark the specified message for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The index of the message. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously mark the specified messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The indexes of the messages. The cancellation token. is . One or more of the are invalid. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously mark the specified range of messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The index of the first message to mark for deletion. The number of messages to mark for deletion. The cancellation token. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously mark all messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously reset the state of all messages marked for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An awaitable task. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Initializes a new instance of the class. Before you can retrieve messages with the , you must first call one of the Connect methods and authenticate using one of the Authenticate methods. The protocol logger. is . Initializes a new instance of the class. Before you can retrieve messages with the , you must first call one of the Connect methods and authenticate using one of the Authenticate methods. Gets an object that can be used to synchronize access to the POP3 server. Gets an object that can be used to synchronize access to the POP3 server. When using the non-Async methods from multiple threads, it is important to lock the object for thread safety when using the synchronous methods. The lock object. Gets the protocol supported by the message service. Gets the protocol supported by the message service. The protocol. Gets the capabilities supported by the POP3 server. The capabilities will not be known until a successful connection has been made and may change once the client is authenticated. The capabilities. Capabilities cannot be enabled, they may only be disabled. Gets the expiration policy. If the server supports the EXPIRE capability (), the value of the property will reflect the value advertized by the server. A value of -1 indicates that messages will never expire. A value of 0 indicates that messages that have been retrieved during the current session will be purged immediately after the connection is closed via the QUIT command. Values larger than 0 indicate the minimum number of days that the server will retain messages which have been retrieved. The expiration policy. Gets the implementation details of the server. If the server advertizes its implementation details, this value will be set to a string containing the information details provided by the server. The implementation details. Gets the minimum delay, in milliseconds, between logins. If the server supports the LOGIN-DELAY capability (), this value will be set to the minimum number of milliseconds that the client must wait between logins. The login delay. Get the size of the POP3 mailbox, in bytes. Gets the size of the POP3 mailbox, in bytes. This value is updated as a side-effect of calling or . The size of the mailbox if available. The has been disposed. The is not connected. The is not authenticated. Gets the authentication mechanisms supported by the POP3 server. The authentication mechanisms are queried as part of the connection process. Servers that do not support the SASL capability will typically support either the APOP authentication mechanism () or the ability to login using the USER and PASS commands (). To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before authenticating. In the case of the APOP authentication mechanism, remove it from the property instead. The authentication mechanisms. Gets or sets the timeout for network streaming operations, in milliseconds. Gets or sets the underlying socket stream's and values. The timeout in milliseconds. Gets whether or not the client is currently connected to an POP3 server. The state is set to immediately after one of the Connect methods succeeds and is not set back to until either the client is disconnected via or until a is thrown while attempting to read or write to the underlying network socket. When an is caught, the connection state of the should be checked before continuing. if the client is connected; otherwise, . Get whether or not the connection is secure (typically via SSL or TLS). Gets whether or not the connection is secure (typically via SSL or TLS). if the connection is secure; otherwise, . Get whether or not the connection is encrypted (typically via SSL or TLS). Gets whether or not the connection is encrypted (typically via SSL or TLS). if the connection is encrypted; otherwise, . Get whether or not the connection is signed (typically via SSL or TLS). Gets whether or not the connection is signed (typically via SSL or TLS). if the connection is signed; otherwise, . Get the negotiated SSL or TLS protocol version. Gets the negotiated SSL or TLS protocol version once an SSL or TLS connection has been made. The negotiated SSL or TLS protocol version. Get the negotiated SSL or TLS cipher algorithm. Gets the negotiated SSL or TLS cipher algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS cipher algorithm. Get the negotiated SSL or TLS cipher algorithm strength. Gets the negotiated SSL or TLS cipher algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS cipher algorithm strength. Get the negotiated SSL or TLS hash algorithm. Gets the negotiated SSL or TLS hash algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS hash algorithm. Get the negotiated SSL or TLS hash algorithm strength. Gets the negotiated SSL or TLS hash algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS hash algorithm strength. Get the negotiated SSL or TLS key exchange algorithm. Gets the negotiated SSL or TLS key exchange algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS key exchange algorithm. Get the negotiated SSL or TLS key exchange algorithm strength. Gets the negotiated SSL or TLS key exchange algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS key exchange algorithm strength. Get whether or not the client is currently authenticated with the POP3 server. Gets whether or not the client is currently authenticated with the POP3 server. To authenticate with the POP3 server, use one of the Authenticate methods. if the client is authenticated; otherwise, . Authenticate using the specified SASL mechanism. Authenticates using the specified SASL mechanism. For a list of available SASL authentication mechanisms supported by the server, check the property after the service has been connected. The SASL mechanism. The cancellation token. is . The has been disposed. The is not connected. The is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A POP3 command failed. An POP3 protocol error occurred. Authenticate using the supplied credentials. Authenticates using the supplied credentials. If the POP3 server supports the APOP authentication mechanism, then APOP is used. If the APOP authentication mechanism is not supported and the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the USER and PASS commands are used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. In the case of the APOP authentication mechanism, remove it from the property instead. The text encoding to use for the user's credentials. The user's credentials. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A POP3 command failed. An POP3 protocol error occurred. Establish a connection to the specified POP3 or POP3/S server. Establishes a connection to the specified POP3 or POP3/S server. If the has a value of 0, then the parameter is used to determine the default port to connect to. The default port used with is 995. All other values will use a default port of 110. If the has a value of , then the is used to determine the default security options. If the has a value of 995, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. The operation was canceled via the cancellation token. was set to and the POP3 server does not support the STLS extension. A socket error occurred trying to connect to the remote host. An error occurred during the SSL/TLS negotiations. An I/O error occurred. A POP3 command failed. A POP3 protocol error occurred. Establish a connection to the specified POP3 or POP3/S server using the provided socket. Establishes a connection to the specified POP3 or POP3/S server using the provided socket. If the has a value of , then the is used to determine the default security options. If the has a value of 995, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. With the exception of using the to determine the default to use when the value is , the and parameters are only used for logging purposes. The socket to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. is not connected. -or- The is a zero-length string. The has been disposed. The is already connected. was set to and the POP3 server does not support the STLS extension. The operation was canceled via the cancellation token. An error occurred during the SSL/TLS negotiations. An I/O error occurred. A POP3 command failed. A POP3 protocol error occurred. Establish a connection to the specified POP3 or POP3/S server using the provided stream. Establishes a connection to the specified POP3 or POP3/S server using the provided stream. If the has a value of , then the is used to determine the default security options. If the has a value of 995, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. With the exception of using the to determine the default to use when the value is , the and parameters are only used for logging purposes. The stream to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. was set to and the POP3 server does not support the STLS extension. The operation was canceled via the cancellation token. An error occurred during the SSL/TLS negotiations. An I/O error occurred. A POP3 command failed. A POP3 protocol error occurred. Disconnect the service. If is , a QUIT command will be issued in order to disconnect cleanly. If set to , a QUIT command will be issued in order to disconnect cleanly. The cancellation token. The has been disposed. Get the message count. Gets the message count. The message count. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Ping the POP3 server to keep the connection alive. Mail servers, if left idle for too long, will automatically drop the connection. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Enable UTF8 mode. The POP3 UTF8 extension allows the client to retrieve messages in the UTF-8 encoding and may also allow the user to authenticate using a UTF-8 encoded username or password. The cancellation token. The has been disposed. The is not connected. The has already been authenticated. The operation was canceled via the cancellation token. The POP3 server does not support the UTF8 extension. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the list of languages supported by the POP3 server. If the POP3 server supports the LANG extension, it is possible to query the list of languages supported by the POP3 server that can be used for error messages. The supported languages. The cancellation token. The has been disposed. The is not connected. The operation was canceled via the cancellation token. The POP3 server does not support the LANG extension. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Set the language used by the POP3 server for error messages. If the POP3 server supports the LANG extension, it is possible to set the language used by the POP3 server for error messages. The language code. The cancellation token. is . is empty. The has been disposed. The is not connected. The operation was canceled via the cancellation token. The POP3 server does not support the LANG extension. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the number of messages available in the message spool. Gets the number of messages available on the POP3 server. Once authenticated, the property will be set to the number of available messages on the POP3 server. The message count. The has been disposed. The is not connected. The is not authenticated. Gets whether or not the supports referencing messages by UIDs. Not all servers support referencing messages by UID, so this property should be checked before using and . If the server does not support UIDs, then all methods that take UID arguments along with and will fail. if supports UIDs; otherwise, . The has been disposed. The is not connected. The is not authenticated. Get the UID of the message at the specified index. Gets the UID of the message at the specified index. Not all servers support UIDs, so you should first check the property for the flag or the convenience property. The message UID. The message index. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the full list of available message UIDs. Gets the full list of available message UIDs. Not all servers support UIDs, so you should first check the property for the flag or the convenience property. The message uids. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the size of the specified message, in bytes. Gets the size of the specified message, in bytes. The message size, in bytes. The index of the message. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the sizes for all available messages, in bytes. Gets the sizes for all available messages, in bytes. The message sizes, in bytes. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the headers for the message at the specified index. Gets the headers for the message at the specified index. The message headers. The index of the message. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the headers for the messages at the specified indexes. Gets the headers for the messages at the specified indexes. When the POP3 server supports the extension, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The headers for the specified messages. The indexes of the messages. The cancellation token. is . One or more of the are invalid. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the headers of the messages within the specified range. Gets the headers of the messages within the specified range. When the POP3 server supports the extension, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The headers of the messages within the specified range. The index of the first message to get. The number of messages to get. The cancellation token. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the message at the specified index. Gets the message at the specified index. The message. The index of the message. The cancellation token. The progress reporting mechanism. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the messages at the specified indexes. Gets the messages at the specified indexes. When the POP3 server supports the extension, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The messages. The indexes of the messages. The cancellation token. The progress reporting mechanism. is . One or more of the are invalid. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the messages within the specified range. Gets the messages within the specified range. When the POP3 server supports the extension, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The messages. The index of the first message to get. The number of messages to get. The cancellation token. The progress reporting mechanism. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the message or header stream at the specified index. Gets the message or header stream at the specified index. The message or header stream. The index of the message. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the message or header streams at the specified indexes. Get the message or header streams at the specified indexes. If the POP3 server supports the extension, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The message or header streams. The indexes of the messages. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. is . One or more of the are invalid. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the message or header streams within the specified range. Gets the message or header streams within the specified range. If the POP3 server supports the extension, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The message or header streams. The index of the first stream to get. The number of streams to get. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The POP3 server does not support the UIDL extension. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Mark the specified message for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The index of the message. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Mark the specified messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The indexes of the messages. The cancellation token. is . One or more of the are invalid. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Mark the specified range of messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The index of the first message to mark for deletion. The number of messages to mark for deletion. The cancellation token. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Mark all messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Reset the state of all messages marked for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get an enumerator for the messages in the folder. Gets an enumerator for the messages in the folder. The enumerator. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. A POP3 command failed. A POP3 protocol error occurred. Releases the unmanaged resources used by the and optionally releases the managed resources. Releases the unmanaged resources used by the and optionally releases the managed resources. to release both managed and unmanaged resources; to release only the unmanaged resources. An interface for a POP3 client. Implemented by . Gets the capabilities supported by the POP3 server. The capabilities will not be known until a successful connection has been made and may change once the client is authenticated. The capabilities. Capabilities cannot be enabled, they may only be disabled. Gets the expiration policy. If the server supports the EXPIRE capability (), the value of the property will reflect the value advertized by the server. A value of -1 indicates that messages will never expire. A value of 0 indicates that messages that have been retrieved during the current session will be purged immediately after the connection is closed via the QUIT command. Values larger than 0 indicate the minimum number of days that the server will retain messages which have been retrieved. The expiration policy. Gets the implementation details of the server. If the server advertizes its implementation details, this value will be set to a string containing the information details provided by the server. The implementation details. Gets the minimum delay, in milliseconds, between logins. If the server supports the LOGIN-DELAY capability (), this value will be set to the minimum number of milliseconds that the client must wait between logins. The login delay. Enable UTF8 mode. The POP3 UTF8 extension allows the client to retrieve messages in the UTF-8 encoding and may also allow the user to authenticate using a UTF-8 encoded username or password. The cancellation token. The has been disposed. The is not connected. The has already been authenticated. The operation was canceled via the cancellation token. The POP3 server does not support the UTF8 extension. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously enable UTF8 mode. The POP3 UTF8 extension allows the client to retrieve messages in the UTF-8 encoding and may also allow the user to authenticate using a UTF-8 encoded username or password. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The has already been authenticated. The operation was canceled via the cancellation token. The POP3 server does not support the UTF8 extension. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Get the list of languages supported by the POP3 server. If the POP3 server supports the LANG extension, it is possible to query the list of languages supported by the POP3 server that can be used for error messages. The supported languages. The cancellation token. The has been disposed. The is not connected. The operation was canceled via the cancellation token. The POP3 server does not support the LANG extension. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously get the list of languages supported by the POP3 server. If the POP3 server supports the LANG extension, it is possible to query the list of languages supported by the POP3 server that can be used for error messages. The supported languages. The cancellation token. The has been disposed. The is not connected. The operation was canceled via the cancellation token. The POP3 server does not support the LANG extension. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Set the language used by the POP3 server for error messages. If the POP3 server supports the LANG extension, it is possible to set the language used by the POP3 server for error messages. The language code. The cancellation token. is . is empty. The has been disposed. The is not connected. The operation was canceled via the cancellation token. The POP3 server does not support the LANG extension. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Asynchronously set the language used by the POP3 server for error messages. If the POP3 server supports the LANG extension, it is possible to set the language used by the POP3 server for error messages. An asynchronous task context. The language code. The cancellation token. is . is empty. The has been disposed. The is not connected. The operation was canceled via the cancellation token. The POP3 server does not support the LANG extension. An I/O error occurred. The POP3 command failed. A POP3 protocol error occurred. Capabilities supported by a POP3 server. Capabilities are read as part of the response to the CAPA command that is issued during the connection and authentication phases of the . The server does not support any additional extensions. The server supports APOP authentication. The server supports the EXPIRE extension and defines the expiration policy for messages (see ). The server supports the LOGIN-DELAY extension, allowing the server to specify to the client a minimum number of seconds between login attempts (see ). The server supports the PIPELINING extension, allowing the client to batch multiple requests to the server at at time. The server supports the RESP-CODES extension, allowing the server to provide clients with extended information in error responses. The server supports the SASL authentication extension, allowing the client to authenticate using the advertized authentication mechanisms (see ). The server supports the STLS extension, allowing clients to switch to an encrypted SSL/TLS connection after connecting. The server supports the TOP command, allowing clients to fetch the headers plus an arbitrary number of lines. The server supports the UIDL command, allowing the client to refer to messages via a UID as opposed to a sequence ID. The server supports the USER authentication command, allowing the client to authenticate via a plain-text username and password command (not recommended unless no other authentication mechanisms exist). The server supports the UTF8 extension, allowing clients to retrieve messages in the UTF-8 encoding. The server supports the UTF8=USER extension, allowing clients to authenticate using UTF-8 encoded usernames and passwords. The server supports the LANG extension, allowing clients to specify which language the server should use for error strings. POP3 command handler. All exceptions thrown by the handler are considered fatal and will force-disconnect the connection. If a non-fatal error occurs, set it on the property. A POP3 command exception. The exception that is thrown when a POP3 command fails. Unlike a , a does not require the to be reconnected. Initializes a new instance of the class. Creates a new from the serialized data. The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The error message. An inner exception. Initializes a new instance of the class. Creates a new . The error message. The response status text. An inner exception. is . Initializes a new instance of the class. Creates a new . The error message. Initializes a new instance of the class. Creates a new . The error message. The response status text. is . Initializes a new instance of the class. Creates a new . Get the response status text. Gets the response status text. The response status text. When overridden in a derived class, sets the with information about the exception. Serializes the state of the . The serialization info. The streaming context. is . The state of the . The Pop3Engine is in the disconnected state. The Pop3Engine is in the connected state. The Pop3Engine is in the transaction state, indicating that it is authenticated and may retrieve messages from the server. A POP3 command engine. Initializes a new instance of the class. Gets the URI of the POP3 server. Gets the URI of the POP3 server. The URI of the POP3 server. Gets the authentication mechanisms supported by the POP3 server. The authentication mechanisms are queried during the method. The authentication mechanisms. Gets the capabilities supported by the POP3 server. The capabilities will not be known until a successful connection has been made via the method. The capabilities. Gets the underlying POP3 stream. Gets the underlying POP3 stream. The pop3 stream. Gets or sets the state of the engine. Gets or sets the state of the engine. The engine state. Gets whether or not the engine is currently connected to a POP3 server. Gets whether or not the engine is currently connected to a POP3 server. if the engine is connected; otherwise, . Gets the APOP authentication token. Gets the APOP authentication token. The APOP authentication token. Gets the EXPIRE extension policy value. Gets the EXPIRE extension policy value. The EXPIRE policy. Gets the implementation details of the server. Gets the implementation details of the server. The implementation details. Gets the login delay. Gets the login delay. The login delay. Takes possession of the and reads the greeting. Takes possession of the and reads the greeting. The pop3 stream. The cancellation token Takes possession of the and reads the greeting. Takes possession of the and reads the greeting. The pop3 stream. The cancellation token Disconnects the . Disconnects the . The exception that is causing the disconnection. Reads a single line from the . The line. The cancellation token. The engine is not connected. The operation was canceled via the cancellation token. An I/O error occurred. Reads a single line from the . The line. The cancellation token. The engine is not connected. The operation was canceled via the cancellation token. An I/O error occurred. Run the command pipeline. if exceptions should be thrown for failed commands; otherwise, . The cancellation token. The engine is not connected. Asynchronously run the command pipeline. if exceptions should be thrown for failed commands; otherwise, . The cancellation token. The engine is not connected. A POP3 language. A POP3 language. Initializes a new instance of the class. Creates a new . Get the language code. Gets the language code. This is the value that should be given to . The language. Get the description. Gets the description. The description. A POP3 protocol exception. The exception that is thrown when there is an error communicating with a POP3 server. A is typically fatal and requires the to be reconnected. Initializes a new instance of the class. Creates a new from the serialized data. The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The error message. An inner exception. Initializes a new instance of the class. Creates a new . The error message. Initializes a new instance of the class. Creates a new . An enumeration of the possible POP3 streaming modes. Normal operation is done in the mode, but when retrieving messages (via RETR) or headers (via TOP), the mode should be used. Reads 1 line at a time. Reads data in chunks, ignoring line state. A stream for communicating with a POP3 server. A stream capable of reading data line-by-line () or by raw byte streams (). Initializes a new instance of the class. Creates a new . The underlying network stream. The protocol logger. Get or sets the underlying network stream. Gets or sets the underlying network stream. The underlying network stream. Gets or sets the mode used for reading. The mode. Get whether or not the stream is connected. Gets whether or not the stream is connected. if the stream is connected; otherwise, . Get whether or not the end of the raw data has been reached in mode. When reading the response to a command such as RETR, the end of the data is marked by line matching ".\r\n". if the end of the data has been reached; otherwise, . Get whether the stream supports reading. Gets whether the stream supports reading. if the stream supports reading; otherwise, . Get whether the stream supports writing. Gets whether the stream supports writing. if the stream supports writing; otherwise, . Get whether the stream supports seeking. Gets whether the stream supports seeking. if the stream supports seeking; otherwise, . Get whether the stream supports I/O timeouts. Gets whether the stream supports I/O timeouts. if the stream supports I/O timeouts; otherwise, . Get or set a value, in milliseconds, that determines how long the stream will attempt to read before timing out. Gets or sets a value, in milliseconds, that determines how long the stream will attempt to read before timing out. A value, in milliseconds, that determines how long the stream will attempt to read before timing out. The read timeout. Get or set a value, in milliseconds, that determines how long the stream will attempt to write before timing out. Gets or sets a value, in milliseconds, that determines how long the stream will attempt to write before timing out. A value, in milliseconds, that determines how long the stream will attempt to write before timing out. The write timeout. Get or set the position within the current stream. Gets or sets the position within the current stream. The current position within the stream. The position of the stream. An I/O error occurred. The stream does not support seeking. The stream has been disposed. Get the length of the stream, in bytes. Gets the length of the stream, in bytes. A long value representing the length of the stream in bytes. The length of the stream. The stream does not support seeking. The stream has been disposed. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if the end of the stream has been reached. The buffer. The buffer offset. The number of bytes to read. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream is in line mode (see ). The operation was canceled via the cancellation token. An I/O error occurred. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if the end of the stream has been reached. The buffer. The buffer offset. The number of bytes to read. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream is in line mode (see ). An I/O error occurred. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if the end of the stream has been reached. The buffer. The buffer offset. The number of bytes to read. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream is in line mode (see ). The operation was canceled via the cancellation token. An I/O error occurred. Reads a single line of input from the stream. This method should be called in a loop until it returns . , if reading the line is complete, otherwise. The output buffer to write the line data into. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Asynchronously reads a single line of input from the stream. This method should be called in a loop until it returns . , if reading the line is complete, otherwise. The output buffer to write the line data into. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Queue a command to the POP3 server. Queues a command to the POP3 server. The character encoding. The command. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Asynchronously queue a command to the POP3 server. Asynchronously queues a command to the POP3 server. The character encoding. The command. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. The buffer to write. The offset of the first byte to write. The number of bytes to write. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream does not support writing. The operation was canceled via the cancellation token. An I/O error occurred. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. The buffer to write. The offset of the first byte to write. The number of bytes to write. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream does not support writing. An I/O error occurred. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. A task that represents the asynchronous write operation. The buffer to write. The offset of the first byte to write. The number of bytes to write. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream does not support writing. The operation was canceled via the cancellation token. An I/O error occurred. Clears all buffers for this stream and causes any buffered data to be written to the underlying device. Clears all buffers for this stream and causes any buffered data to be written to the underlying device. The cancellation token. The stream has been disposed. The stream does not support writing. The operation was canceled via the cancellation token. An I/O error occurred. Clears all buffers for this stream and causes any buffered data to be written to the underlying device. Clears all buffers for this stream and causes any buffered data to be written to the underlying device. The stream has been disposed. The stream does not support writing. An I/O error occurred. Clears all buffers for this stream and causes any buffered data to be written to the underlying device. Clears all buffers for this stream and causes any buffered data to be written to the underlying device. A task that represents the asynchronous flush operation. The cancellation token. The stream has been disposed. The stream does not support writing. The operation was canceled via the cancellation token. An I/O error occurred. Sets the position within the current stream. The new position within the stream. The offset into the stream relative to the . The origin to seek from. The stream does not support seeking. Sets the length of the stream. The desired length of the stream in bytes. The stream does not support setting the length. Releases the unmanaged resources used by the and optionally releases the managed resources. to release both managed and unmanaged resources; to release only the unmanaged resources. An HTTP proxy client. An HTTP proxy client. Initializes a new instance of the class. Initializes a new instance of the class. The host name of the proxy server. The proxy server port. is . is not between 1 and 65535. The is a zero-length string. -or- The length of is greater than 255 characters. Initializes a new instance of the class. Initializes a new instance of the class. The host name of the proxy server. The proxy server port. The credentials to use to authenticate with the proxy server. is . -or- is . is not between 1 and 65535. The is a zero-length string. -or- The length of is greater than 255 characters. Connect to the target host. Connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. Asynchronously connect to the target host. Asynchronously connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. An HTTPS proxy client. An HTTPS proxy client. Initializes a new instance of the class. Initializes a new instance of the class. The host name of the proxy server. The proxy server port. is . is not between 1 and 65535. The is a zero-length string. -or- The length of is greater than 255 characters. Initializes a new instance of the class. Initializes a new instance of the class. The host name of the proxy server. The proxy server port. The credentials to use to authenticate with the proxy server. is . -or- is . is not between 1 and 65535. The is a zero-length string. -or- The length of is greater than 255 characters. Gets or sets the set of enabled SSL and/or TLS protocol versions that the client is allowed to use. Gets or sets the enabled SSL and/or TLS protocol versions that the client is allowed to use. By default, MailKit initializes this value to enable only TLS v1.2 and greater. TLS v1.1, TLS v1.0 and all versions of SSL are not enabled by default due to them all being susceptible to security vulnerabilities such as POODLE. This property should be set before calling any of the Connect methods. The SSL and TLS protocol versions that are enabled. Gets or sets the client SSL certificates. Some servers may require the client SSL certificates in order to allow the user to connect. This property should be set before calling any of the Connect methods. The client SSL certificates. Get or set whether connecting via SSL/TLS should check certificate revocation. Gets or sets whether connecting via SSL/TLS should check certificate revocation. Normally, the value of this property should be set to (the default) for security reasons, but there are times when it may be necessary to set it to . For example, most Certificate Authorities are probably pretty good at keeping their CRL and/or OCSP servers up 24/7, but occasionally they do go down or are otherwise unreachable due to other network problems between the client and the Certificate Authority. When this happens, it becomes impossible to check the revocation status of one or more of the certificates in the chain resulting in an being thrown in the Connect method. If this becomes a problem, it may become desirable to set to . if certificate revocation should be checked; otherwise, . Get or sets a callback function to validate the server certificate. Gets or sets a callback function to validate the server certificate. This property should be set before calling any of the Connect methods. The server certificate validation callback function. Connect to the target host. Connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. Asynchronously connect to the target host. Asynchronously connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. An interface for connecting to services via a proxy. Implemented by , , , and . Gets the proxy credentials. Gets the credentials to use when authenticating with the proxy server. The proxy credentials. Get the proxy host. Gets the host name of the proxy server. The host name of the proxy server. Get the proxy port. Gets the port to use when connecting to the proxy server. The proxy port. Get or set the local IP end point to use when connecting to a remote host. Gets or sets the local IP end point to use when connecting to a remote host. The local IP end point or to use the default end point. Connect to the target host. Connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. Asynchronously connect to the target host. Asynchronously connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. Connect to the target host. Connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The timeout, in milliseconds. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. The operation timed out. A socket error occurred trying to connect to the remote host. An I/O error occurred. Asynchronously connect to the target host. Asynchronously connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The timeout, in milliseconds. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. The operation timed out. A socket error occurred trying to connect to the remote host. An I/O error occurred. An abstract proxy client base class. A proxy client can be used to connect to a service through a firewall that would otherwise be blocked. Initializes a new instance of the class. Initializes a new instance of the class. The host name of the proxy server. The proxy server port. is . is not between 0 and 65535. The is a zero-length string. -or- The length of is greater than 255 characters. Initializes a new instance of the class. Initializes a new instance of the class. The host name of the proxy server. The proxy server port. The credentials to use to authenticate with the proxy server. is . -or- is . is not between 0 and 65535. The is a zero-length string. -or- The length of is greater than 255 characters. Gets the proxy credentials. Gets the credentials to use when authenticating with the proxy server. The proxy credentials. Get the proxy host. Gets the host name of the proxy server. The host name of the proxy server. Get the proxy port. Gets the port to use when connecting to the proxy server. The proxy port. Get or set the local IP end point to use when connecting to a remote host. Gets or sets the local IP end point to use when connecting to a remote host. The local IP end point or to use the default end point. Connect to the target host. Connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The cancellation token. is . is not between 1 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. Asynchronously connect to the target host. Asynchronously connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The cancellation token. is . is not between 1 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. Connect to the target host. Connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The timeout, in milliseconds. The cancellation token. is . is not between 1 and 65535. -or- is less than -1. The is a zero-length string. The operation was canceled via the cancellation token. The operation timed out. A socket error occurred trying to connect to the remote host. An I/O error occurred. Asynchronously connect to the target host. Asynchronously connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The timeout, in milliseconds. The cancellation token. is . is not between 1 and 65535. -or- is less than -1. The is a zero-length string. The operation was canceled via the cancellation token. The operation timed out. A socket error occurred trying to connect to the remote host. An I/O error occurred. A proxy protocol exception. The exception that is thrown when there is an error communicating with a proxy server. Initializes a new instance of the class. Creates a new from the serialized data. The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The error message. An inner exception. Initializes a new instance of the class. Creates a new . The error message. Initializes a new instance of the class. Creates a new . A SOCKS4a proxy client. A SOCKS4a proxy client. Initializes a new instance of the class. Initializes a new instance of the class. The host name of the proxy server. The proxy server port. is . is not between 1 and 65535. The is a zero-length string. -or- The length of is greater than 255 characters. Initializes a new instance of the class. Initializes a new instance of the class. The host name of the proxy server. The proxy server port. The credentials to use to authenticate with the proxy server. is . -or- is . is not between 1 and 65535. The is a zero-length string. A SOCKS4 proxy client. A SOCKS4 proxy client. Initializes a new instance of the class. Initializes a new instance of the class. The host name of the proxy server. The proxy server port. is . is not between 1 and 65535. The is a zero-length string. -or- The length of is greater than 255 characters. Initializes a new instance of the class. Initializes a new instance of the class. The host name of the proxy server. The proxy server port. The credentials to use to authenticate with the proxy server. is . -or- is . is not between 1 and 65535. The is a zero-length string. Get or set whether this is a Socks4a client. Gets or sets whether this is a Socks4a client. if is is a Socks4a client; otherwise, . Connect to the target host. Connects to the target host and port through the proxy server. The connected network stream. The host name of the proxy server. The proxy server port. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. Asynchronously connect to the target host. Asynchronously connects to the target host and port through the proxy server. The connected network stream. The host name of the proxy server. The proxy server port. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. A SOCKS5 proxy client. A SOCKS5 proxy client. Initializes a new instance of the class. Initializes a new instance of the class. The host name of the proxy server. The proxy server port. is . is not between 1 and 65535. The is a zero-length string. -or- The length of is greater than 255 characters. Initializes a new instance of the class. Initializes a new instance of the class. The host name of the proxy server. The proxy server port. The credentials to use to authenticate with the proxy server. is . -or- is . is not between 1 and 65535. The is a zero-length string. -or- The length of is greater than 255 characters. Connect to the target host. Connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. Asynchronously connect to the target host. Asynchronously connects to the target host and port through the proxy server. The connected network stream. The host name of the target server. The target server port. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. An abstract SOCKS proxy client. An abstract SOCKS proxy client. Initializes a new instance of the class. Initializes a new instance of the class. The SOCKS protocol version. The host name of the proxy server. The proxy server port. is . is not between 1 and 65535. The is a zero-length string. Initializes a new instance of the class. Initializes a new instance of the class. The SOCKS protocol version. The host name of the proxy server. The proxy server port. The credentials to use to authenticate with the proxy server. is . -or- is . is not between 1 and 65535. The is a zero-length string. Get the SOCKS protocol version. Gets the SOCKS protocol version. The SOCKS protocol version. An SMTP client that can be used to send email messages. The class supports both the "smtp" and "smtps" protocols. The "smtp" protocol makes a clear-text connection to the SMTP server and does not use SSL or TLS unless the SMTP server supports the STARTTLS extension. The "smtps" protocol, however, connects to the SMTP server using an SSL-wrapped connection. The connection established by any of the Connect methods may be re-used if an application wishes to send multiple messages to the same SMTP server. Since connecting and authenticating can be expensive operations, re-using a connection can significantly improve performance when sending a large number of messages to the same SMTP server over a short period of time. Asynchronously send a custom command to the SMTP server. Asynchronously sends a custom command to the SMTP server. The command string should not include the terminating \r\n sequence. The command response. The command. The cancellation token. is . The has been disposed. The is not connected. The operation has been canceled. An I/O error occurred. An SMTP protocol exception occurred. Asynchronously authenticate using the specified SASL mechanism. Authenticates using the specified SASL mechanism. For a list of available SASL authentication mechanisms supported by the server, check the property after the service has been connected. An asynchronous task context. The SASL mechanism. The cancellation token. is . The is not connected. The is already authenticated. The SMTP server does not support authentication. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. The SMTP command failed. An SMTP protocol error occurred. Asynchronously authenticate using the supplied credentials. Asynchronously authenticates using the supplied credentials. If the SMTP server supports authentication, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If, on the other hand, authentication is not supported by the SMTP server, then this method will throw . The property can be checked for the flag to make sure the SMTP server supports authentication before calling this method. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. An asynchronous task context. The text encoding to use for the user's credentials. The user's credentials. The cancellation token. is . -or- is . The is not connected. The is already authenticated. The SMTP server does not support authentication. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. The SMTP command failed. An SMTP protocol error occurred. Asynchronously establish a connection to the specified SMTP or SMTP/S server. Establishes a connection to the specified SMTP or SMTP/S server. If the has a value of 0, then the parameter is used to determine the default port to connect to. The default port used with is 465. All other values will use a default port of 25. If the has a value of , then the is used to determine the default security options. If the has a value of 465, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. The connection established by any of the Connect methods may be re-used if an application wishes to send multiple messages to the same SMTP server. Since connecting and authenticating can be expensive operations, re-using a connection can significantly improve performance when sending a large number of messages to the same SMTP server over a short period of time. An asynchronous task context. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. was set to and the SMTP server does not support the STARTTLS extension. The operation was canceled. A socket error occurred trying to connect to the remote host. An error occurred during the SSL/TLS negotiations. An I/O error occurred. An SMTP command failed. An SMTP protocol error occurred. Asynchronously establish a connection to the specified SMTP or SMTP/S server using the provided socket. Establishes a connection to the specified SMTP or SMTP/S server using the provided socket. If the has a value of , then the is used to determine the default security options. If the has a value of 465, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. With the exception of using the to determine the default to use when the value is , the and parameters are only used for logging purposes. An asynchronous task context. The socket to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. is not connected. -or- The is a zero-length string. The has been disposed. The is already connected. was set to and the SMTP server does not support the STARTTLS extension. The operation was canceled. An error occurred during the SSL/TLS negotiations. An I/O error occurred. An SMTP command failed. An SMTP protocol error occurred. Asynchronously establish a connection to the specified SMTP or SMTP/S server using the provided socket. Establishes a connection to the specified SMTP or SMTP/S server using the provided socket. If the has a value of , then the is used to determine the default security options. If the has a value of 465, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. With the exception of using the to determine the default to use when the value is , the and parameters are only used for logging purposes. An asynchronous task context. The stream to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. was set to and the SMTP server does not support the STARTTLS extension. The operation was canceled. An error occurred during the SSL/TLS negotiations. An I/O error occurred. An SMTP command failed. An SMTP protocol error occurred. Asynchronously disconnect the service. If is , a QUIT command will be issued in order to disconnect cleanly. An asynchronous task context. If set to , a QUIT command will be issued in order to disconnect cleanly. The cancellation token. The has been disposed. Asynchronously ping the SMTP server to keep the connection alive. Mail servers, if left idle for too long, will automatically drop the connection. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The operation was canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol error occurred. Asynchronously get the size of the message. Asynchronously calculates the size of the message in bytes. This method is called by SendAsync methods in the following conditions: The SMTP server supports the SIZE= parameter in the MAIL FROM command. The parameter is non-null. The SMTP server supports the CHUNKING extension. The size of the message, in bytes. The formatting options. The message. The cancellation token. Asynchronously send the specified message. Sends the specified message. The sender address is determined by checking the following message headers (in order of precedence): Resent-Sender, Resent-From, Sender, and From. If either the Resent-Sender or Resent-From addresses are present, the recipients are collected from the Resent-To, Resent-Cc, and Resent-Bcc headers, otherwise the To, Cc, and Bcc headers are used. The final free-form text response from the server. The formatting options. The message. The cancellation token. The progress reporting mechanism. is . -or- is . The has been disposed. The is not connected. Authentication is required before sending a message. A sender has not been specified. -or- No recipients have been specified. Internationalized formatting was requested but is not supported by the server. The operation has been canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol exception occurred. Asynchronously send the specified message using the supplied sender and recipients. Sends the message by uploading it to an SMTP server using the supplied sender and recipients. The final free-form text response from the server. The formatting options. The message. The mailbox address to use for sending the message. The mailbox addresses that should receive the message. The cancellation token. The progress reporting mechanism. is . -or- is . -or- is . -or- is . The has been disposed. The is not connected. Authentication is required before sending a message. A sender has not been specified. -or- No recipients have been specified. Internationalized formatting was requested but is not supported by the server. The operation has been canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol exception occurred. Asynchronously expand a mailing address alias. Expands a mailing address alias. The expanded list of mailbox addresses. The mailing address alias. The cancellation token. is . is an empty string. The has been disposed. The is not connected. Authentication is required before expanding an alias. The operation has been canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol exception occurred. Asynchronously verify the existence of a mailbox address. Verifies the existence a mailbox address with the SMTP server, returning the expanded mailbox address if it exists. The expanded mailbox address. The mailbox address. The cancellation token. is . is an empty string. The has been disposed. The is not connected. Authentication is required before verifying the existence of an address. The operation has been canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol exception occurred. Initializes a new instance of the class. Before you can send messages with the , you must first call one of the Connect methods. Depending on whether the SMTP server requires authenticating or not, you may also need to authenticate using one of the Authenticate methods. Initializes a new instance of the class. Before you can send messages with the , you must first call one of the Connect methods. Depending on whether the SMTP server requires authenticating or not, you may also need to authenticate using one of the Authenticate methods. The protocol logger. is . Get the underlying SMTP stream. Gets the underlying SMTP stream. The SMTP stream. Gets an object that can be used to synchronize access to the SMTP server. Gets an object that can be used to synchronize access to the SMTP server between multiple threads. When using methods from multiple threads, it is important to lock the object for thread safety. The lock object. Get the protocol supported by the message service. Gets the protocol supported by the message service. The protocol. Get the capabilities supported by the SMTP server. The capabilities will not be known until a successful connection has been made and may change once the client is authenticated. The capabilities. Capabilities cannot be enabled, they may only be disabled. Get or set the local domain. The local domain is used in the HELO or EHLO commands sent to the SMTP server. If left unset, the local IP address will be used instead. The local domain. Get whether or not the BDAT command is preferred over the DATA command. Gets whether or not the BDAT command is preferred over the standard DATA command. The BDAT command is normally only used when the message being sent contains binary data (e.g. one or more MIME parts contains a Content-Transfer-Encoding: binary header). This option provides a way to override this behavior, forcing the to send messages using the BDAT command instead of the DATA command even when it is not necessary to do so. if the BDAT command is preferred over the DATA command; otherwise, . Get the maximum message size supported by the server. The maximum message size will not be known until a successful connection has been made and may change once the client is authenticated. This value is only relevant if the includes the flag. The maximum message size supported by the server. Get or set whether the client should use the REQUIRETLS extension if it is available. Gets or sets whether the client should use the REQUIRETLS extension if it is available. The REQUIRETLS extension (as defined in rfc8689) is a way to ensure that every SMTP server that a message passes through on its way to the recipient is required to use a TLS connection in order to transfer the message to the next SMTP server. This feature is only available if contains the flag when sending the message. if the REQUIRETLS extension should be used; otherwise, . Get the authentication mechanisms supported by the SMTP server. The authentication mechanisms are queried as part of the connection process. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before authenticating. The authentication mechanisms. Get or set the timeout for network streaming operations, in milliseconds. Gets or sets the underlying socket stream's and values. The timeout in milliseconds. Get whether or not the client is currently connected to an SMTP server. The state is set to immediately after one of the Connect methods succeeds and is not set back to until either the client is disconnected via or until an is thrown while attempting to read or write to the underlying network socket. When an is caught, the connection state of the should be checked before continuing. if the client is connected; otherwise, . Get whether or not the connection is secure (typically via SSL or TLS). Gets whether or not the connection is secure (typically via SSL or TLS). if the connection is secure; otherwise, . Get whether or not the connection is encrypted (typically via SSL or TLS). Gets whether or not the connection is encrypted (typically via SSL or TLS). if the connection is encrypted; otherwise, . Get whether or not the connection is signed (typically via SSL or TLS). Gets whether or not the connection is signed (typically via SSL or TLS). if the connection is signed; otherwise, . Get the negotiated SSL or TLS protocol version. Gets the negotiated SSL or TLS protocol version once an SSL or TLS connection has been made. The negotiated SSL or TLS protocol version. Get the negotiated SSL or TLS cipher algorithm. Gets the negotiated SSL or TLS cipher algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS cipher algorithm. Get the negotiated SSL or TLS cipher algorithm strength. Gets the negotiated SSL or TLS cipher algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS cipher algorithm strength. Get the negotiated SSL or TLS hash algorithm. Gets the negotiated SSL or TLS hash algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS hash algorithm. Get the negotiated SSL or TLS hash algorithm strength. Gets the negotiated SSL or TLS hash algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS hash algorithm strength. Get the negotiated SSL or TLS key exchange algorithm. Gets the negotiated SSL or TLS key exchange algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS key exchange algorithm. Get the negotiated SSL or TLS key exchange algorithm strength. Gets the negotiated SSL or TLS key exchange algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS key exchange algorithm strength. Get whether or not the client is currently authenticated with the SMTP server. Gets whether or not the client is currently authenticated with the SMTP server. To authenticate with the SMTP server, use one of the Authenticate methods. if the client is authenticated; otherwise, . Invoked only when no recipients were accepted by the SMTP server. If is overridden to not throw an exception, this method should be overridden to throw an appropriate exception instead. The message being sent. Send a custom command to the SMTP server. Sends a custom command to the SMTP server. The command string should not include the terminating \r\n sequence. The command response. The command. The cancellation token. is . The has been disposed. The is not connected. The operation has been canceled. An I/O error occurred. An SMTP protocol exception occurred. Authenticate using the specified SASL mechanism. Authenticates using the specified SASL mechanism. For a list of available SASL authentication mechanisms supported by the server, check the property after the service has been connected. The SASL mechanism. The cancellation token. is . The is not connected. The is already authenticated. The SMTP server does not support authentication. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. The SMTP command failed. An SMTP protocol error occurred. Authenticate using the supplied credentials. Authenticates using the supplied credentials. If the SMTP server supports authentication, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If, on the other hand, authentication is not supported by the SMTP server, then this method will throw . The property can be checked for the flag to make sure the SMTP server supports authentication before calling this method. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. The text encoding to use for the user's credentials. The user's credentials. The cancellation token. is . -or- is . The is not connected. The is already authenticated. The SMTP server does not support authentication. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. The SMTP command failed. An SMTP protocol error occurred. Establish a connection to the specified SMTP or SMTP/S server. Establishes a connection to the specified SMTP or SMTP/S server. If the has a value of 0, then the parameter is used to determine the default port to connect to. The default port used with is 465. All other values will use a default port of 25. If the has a value of , then the is used to determine the default security options. If the has a value of 465, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. The connection established by any of the Connect methods may be re-used if an application wishes to send multiple messages to the same SMTP server. Since connecting and authenticating can be expensive operations, re-using a connection can significantly improve performance when sending a large number of messages to the same SMTP server over a short period of time. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. was set to and the SMTP server does not support the STARTTLS extension. The operation was canceled. A socket error occurred trying to connect to the remote host. An error occurred during the SSL/TLS negotiations. An I/O error occurred. An SMTP command failed. An SMTP protocol error occurred. Establish a connection to the specified SMTP or SMTP/S server using the provided socket. Establishes a connection to the specified SMTP or SMTP/S server using the provided socket. If the has a value of , then the is used to determine the default security options. If the has a value of 465, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. With the exception of using the to determine the default to use when the value is , the and parameters are only used for logging purposes. The socket to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. is not connected. -or- The is a zero-length string. The has been disposed. The is already connected. was set to and the SMTP server does not support the STARTTLS extension. The operation was canceled. An error occurred during the SSL/TLS negotiations. An I/O error occurred. An SMTP command failed. An SMTP protocol error occurred. Establish a connection to the specified SMTP or SMTP/S server using the provided stream. Establishes a connection to the specified SMTP or SMTP/S server using the provided stream. If the has a value of , then the is used to determine the default security options. If the has a value of 465, then the default options used will be . All other values will use . Once a connection is established, properties such as and will be populated. With the exception of using the to determine the default to use when the value is , the and parameters are only used for logging purposes. The stream to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. was set to and the SMTP server does not support the STARTTLS extension. The operation was canceled. An error occurred during the SSL/TLS negotiations. An I/O error occurred. An SMTP command failed. An SMTP protocol error occurred. Disconnect the service. If is , a QUIT command will be issued in order to disconnect cleanly. If set to , a QUIT command will be issued in order to disconnect cleanly. The cancellation token. The has been disposed. Ping the SMTP server to keep the connection alive. Mail servers, if left idle for too long, will automatically drop the connection. The cancellation token. The has been disposed. The is not connected. The operation was canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol error occurred. Invoked when the sender is accepted by the SMTP server. The default implementation does nothing. The message being sent. The mailbox used in the MAIL FROM command. The response to the MAIL FROM command. Invoked when a recipient is not accepted by the SMTP server. The default implementation throws an appropriate . The message being sent. The mailbox used in the MAIL FROM command. The response to the MAIL FROM command. Get the envelope identifier to be used with delivery status notifications. The envelope identifier, if non-empty, is useful in determining which message a delivery status notification was issued for. The envelope identifier should be unique and may be up to 100 characters in length, but must consist only of printable ASCII characters and no white space. For more information, see rfc3461, section 4.4. The envelope identifier. The message. Get or set how much of the message to include in any failed delivery status notifications. Gets or sets how much of the message to include in any failed delivery status notifications. A value indicating how much of the message to include in a failure delivery status notification. Invoked when a recipient is accepted by the SMTP server. The default implementation does nothing. The message being sent. The mailbox used in the RCPT TO command. The response to the RCPT TO command. Invoked when a recipient is not accepted by the SMTP server. The default implementation throws an appropriate . The message being sent. The mailbox used in the RCPT TO command. The response to the RCPT TO command. Get the types of delivery status notification desired for the specified recipient mailbox. Gets the types of delivery status notification desired for the specified recipient mailbox. The desired delivery status notification type. The message being sent. The recipient mailbox. Get the original intended recipient address and address type. Gets the original intended recipient address and address type for the purpose of delivery status notification. When initially submitting a message via SMTP, the address returned by this method MUST be identical to the address. Likewise, when a mailing list submits a message via SMTP to be distributed to the list subscribers, the address returned by this method MUST match the new RCPT TO address of each recipient, not the address specified by the original sender of the message.) The message being sent. The recipient mailbox. The original recipient address and the address type. Prepare the message for transport with the specified constraints. Prepares the message for transport with the specified constraints. Typically, this involves calling on the message with the provided constraints. The format options. The message. The encoding constraint. The max line length supported by the server. Get the size of the message. Calculates the size of the message in bytes. This method is called by Send methods in the following conditions: The SMTP server supports the SIZE= parameter in the MAIL FROM command. The parameter is non-null. The SMTP server supports the CHUNKING extension. The size of the message, in bytes. The formatting options. The message. The cancellation token. Send the specified message. Sends the specified message. The sender address is determined by checking the following message headers (in order of precedence): Resent-Sender, Resent-From, Sender, and From. If either the Resent-Sender or Resent-From addresses are present, the recipients are collected from the Resent-To, Resent-Cc, and Resent-Bcc headers, otherwise the To, Cc, and Bcc headers are used. The final free-form text response from the server. The formatting options. The message. The cancellation token. The progress reporting mechanism. is . -or- is . The has been disposed. The is not connected. Authentication is required before sending a message. A sender has not been specified. -or- No recipients have been specified. Internationalized formatting was requested but is not supported by the server. The operation has been canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol exception occurred. Send the specified message using the supplied sender and recipients. Sends the message by uploading it to an SMTP server using the supplied sender and recipients. The final free-form text response from the server. The formatting options. The message. The mailbox address to use for sending the message. The mailbox addresses that should receive the message. The cancellation token. The progress reporting mechanism. is . -or- is . -or- is . -or- is . The has been disposed. The is not connected. Authentication is required before sending a message. A sender has not been specified. -or- No recipients have been specified. Internationalized formatting was requested but is not supported by the server. The operation has been canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol exception occurred. Expand a mailing address alias. Expands a mailing address alias. The expanded list of mailbox addresses. The mailing address alias. The cancellation token. is . is an empty string. The has been disposed. The is not connected. Authentication is required before expanding an alias. The operation has been canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol exception occurred. Verify the existence of a mailbox address. Verifies the existence a mailbox address with the SMTP server, returning the expanded mailbox address if it exists. The expanded mailbox address. The mailbox address. The cancellation token. is . is an empty string. The has been disposed. The is not connected. Authentication is required before verifying the existence of an address. The operation has been canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol exception occurred. Releases the unmanaged resources used by the and optionally releases the managed resources. Releases the unmanaged resources used by the and optionally releases the managed resources. to release both managed and unmanaged resources; to release only the unmanaged resources. An interface for an SMTP client. Implemented by . Get the capabilities supported by the SMTP server. The capabilities will not be known until a successful connection has been made and may change once the client is authenticated. The capabilities. Capabilities cannot be enabled, they may only be disabled. Get or set the local domain. The local domain is used in the HELO or EHLO commands sent to the SMTP server. If left unset, the local IP address will be used instead. The local domain. Get the maximum message size supported by the server. The maximum message size will not be known until a successful connection has been made and may change once the client is authenticated. This value is only relevant if the includes the flag. The maximum message size supported by the server. Get or set whether the client should use the REQUIRETLS extension if it is available. Gets or sets whether the client should use the REQUIRETLS extension if it is available. The REQUIRETLS extension (as defined in rfc8689) is a way to ensure that every SMTP server that a message passes through on its way to the recipient is required to use a TLS connection in order to transfer the message to the next SMTP server. This feature is only available if contains the flag when sending the message. if the REQUIRETLS extension should be used; otherwise, . Get or set how much of the message to include in any failed delivery status notifications. Gets or sets how much of the message to include in any failed delivery status notifications. A value indicating how much of the message to include in a failure delivery status notification. Expand a mailing address alias. Expands a mailing address alias. The expanded list of mailbox addresses. The mailing address alias. The cancellation token. is . is an empty string. The has been disposed. The is not connected. Authentication is required before verifying the existence of an address. The operation has been canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol exception occurred. Asynchronously expand a mailing address alias. Expands a mailing address alias. The expanded list of mailbox addresses. The mailing address alias. The cancellation token. is . is an empty string. The has been disposed. The is not connected. Authentication is required before verifying the existence of an address. The operation has been canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol exception occurred. Verify the existence of a mailbox address. Verifies the existence a mailbox address with the SMTP server, returning the expanded mailbox address if it exists. The expanded mailbox address. The mailbox address. The cancellation token. is . is an empty string. The has been disposed. The is not connected. Authentication is required before verifying the existence of an address. The operation has been canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol exception occurred. Asynchronously verify the existence of a mailbox address. Verifies the existence a mailbox address with the SMTP server, returning the expanded mailbox address if it exists. The expanded mailbox address. The mailbox address. The cancellation token. is . is an empty string. The has been disposed. The is not connected. Authentication is required before verifying the existence of an address. The operation has been canceled. An I/O error occurred. The SMTP command failed. An SMTP protocol exception occurred. Capabilities supported by an SMTP server. Capabilities are read as part of the response to the EHLO command that is issued during the connection phase of the . The server does not support any additional extensions. The server supports the SIZE extension and may have a maximum message size limitation (see ). The server supports the DSN extension, allowing clients to specify which (if any) recipients they would like to receive delivery notifications for. The server supports the ENHANCEDSTATUSCODES extension. The server supports the AUTH extension, allowing clients to authenticate via supported SASL mechanisms. The server supports the 8BITMIME extension, allowing clients to send messages using the "8bit" Content-Transfer-Encoding. The server supports the PIPELINING extension, allowing clients to send multiple commands at once in order to reduce round-trip latency. The server supports the BINARYMIME extension. The server supports the CHUNKING extension, allowing clients to upload messages in chunks. The server supports the STARTTLS extension, allowing clients to switch to an encrypted SSL/TLS connection after connecting. The server supports the SMTPUTF8 extension. The server supports the REQUIRETLS extension. An SMTP protocol exception. The exception that is thrown when an SMTP command fails. Unlike a , a does not require the to be reconnected. Initializes a new instance of the class. Creates a new from the serialized data. The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The error code. The status code. The rejected mailbox. The error message. The inner exception. Initializes a new instance of the class. Creates a new . The error code. The status code. The rejected mailbox. The error message. Initializes a new instance of the class. Creates a new . The error code. The status code.> The error message. The inner exception. Initializes a new instance of the class. Creates a new . The error code. The status code.> The error message. When overridden in a derived class, sets the with information about the exception. Serializes the state of the . The serialization info. The streaming context. is . Get the error code which may provide additional information. The error code can be used to programmatically deal with the exception without necessarily needing to display the raw exception message to the user. The status code. Get the mailbox that the error occurred on. This property will only be available when the value is either or and may be used to help the user decide how to proceed. The mailbox. Get the status code returned by the SMTP server. The raw SMTP status code that resulted in the being thrown. The status code. An SMTP filter designed to format a message stream for the DATA command. A special stream filter that can encode or decode lines beginning with a '.' as needed when sending/receiving a message via the SMTP protocol or when saving a message to an IIS message pickup directory. Initializes a new instance of the class. Creates a new . if the filter should decode the content; otherwise, . Filter the specified input. Filters the specified input buffer starting at the given index, spanning across the specified number of bytes. The filtered output. The input buffer. The starting index of the input buffer. The length of the input buffer, starting at . The output index. The output length. If set to , all internally buffered data should be flushed to the output buffer. Reset the filter. Resets the filter. An enumeration of the possible error codes that may be reported by a . An enumeration of the possible error codes that may be reported by a . The message was not accepted for delivery. This may happen if the server runs out of available disk space. The sender's mailbox address was not accepted. Check the property for the mailbox used as the sender's mailbox address. A recipient's mailbox address was not accepted. Check the property for the particular recipient mailbox that was not accepted. An unexpected status code was returned by the server. For more details, the property may provide some additional hints. An SMTP protocol exception. The exception that is thrown when there is an error communicating with an SMTP server. An is typically fatal and requires the to be reconnected. Initializes a new instance of the class. Creates a new from the serialized data. The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The error message. The inner exception. Initializes a new instance of the class. Creates a new . The error message. Initializes a new instance of the class. Creates a new . An SMTP command response. An SMTP command response. Get the status code. Gets the status code. The status code. Get the response text. Gets the response text. The response text. Initializes a new instance of the class. Creates a new . The status code. The response text. An enumeration of possible SMTP status codes. An enumeration of possible SMTP status codes. The "system status" status code. The "help" status code. The "service ready" status code. The "service closing transmission channel" status code. The "authentication successful" status code. The general purpose "OK" status code. The "User not local; will forward" status code. The "cannot verify user; will attempt delivery" status code. The "authentication challenge" status code. The "start mail input" status code. The "service not available" status code. The "password transition needed" status code. The "mailbox busy" status code. The "error in processing" status code. The "insufficient storage" status code. The "temporary authentication failure" status code. The "command unrecognized" status code. The "syntax error" status code. The "command not implemented" status code. The "bad command sequence" status code. The "command parameter not implemented" status code. The "authentication required" status code. The "authentication mechanism too weak" status code. The "authentication invalid credentials" status code. The "encryption required for authentication mechanism" status code. The "mailbox unavailable" status code. The "user not local try alternate path" status code. The "exceeded storage allocation" status code. The "mailbox name not allowed" status code. The "transaction failed" status code. The "mail from/rcpt to parameters not recognized or not implemented" status code. A stream for communicating with an SMTP server. A stream capable of reading SMTP server responses. Initializes a new instance of the class. Creates a new . The underlying network stream. The protocol logger. Get or sets the underlying network stream. Gets or sets the underlying network stream. The underlying network stream. Get whether or not the stream is connected. Gets whether or not the stream is connected. if the stream is connected; otherwise, . Get whether the stream supports reading. Gets whether the stream supports reading. if the stream supports reading; otherwise, . Get whether the stream supports writing. Gets whether the stream supports writing. if the stream supports writing; otherwise, . Get whether the stream supports seeking. Gets whether the stream supports seeking. if the stream supports seeking; otherwise, . Get whether the stream supports I/O timeouts. Gets whether the stream supports I/O timeouts. if the stream supports I/O timeouts; otherwise, . Get or set a value, in milliseconds, that determines how long the stream will attempt to read before timing out. Gets or sets a value, in milliseconds, that determines how long the stream will attempt to read before timing out. A value, in milliseconds, that determines how long the stream will attempt to read before timing out. The read timeout. Get or set a value, in milliseconds, that determines how long the stream will attempt to write before timing out. Gets or sets a value, in milliseconds, that determines how long the stream will attempt to write before timing out. A value, in milliseconds, that determines how long the stream will attempt to write before timing out. The write timeout. Get or set the position within the current stream. Gets or sets the position within the current stream. The current position within the stream. The position of the stream. An I/O error occurred. The stream does not support seeking. The stream has been disposed. Get the length of the stream, in bytes. Gets the length of the stream, in bytes. A long value representing the length of the stream in bytes. The length of the stream. The stream does not support seeking. The stream has been disposed. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if the end of the stream has been reached. The buffer. The buffer offset. The number of bytes to read. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if the end of the stream has been reached. The buffer. The buffer offset. The number of bytes to read. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. An I/O error occurred. Asynchronously reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if the end of the stream has been reached. The buffer. The buffer offset. The number of bytes to read. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Read an SMTP server response. Reads a full command response from the SMTP server. The response. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. An SMTP protocol error occurred. Asynchronously read an SMTP server response. Reads a full command response from the SMTP server. The response. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. An SMTP protocol error occurred. Queue a command to the SMTP server. Queues a command to the SMTP server. The command. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Asynchronously queue a command to the SMTP server. Asynchronously queues a command to the SMTP server. The command. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. Send a command to the SMTP server. Sends a command to the SMTP server and reads the response. The response. The command. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. An SMTP protocol error occurred. Asynchronously send a command to the SMTP server. Asynchronously sends a command to the SMTP server and reads the response. The response. The command. The cancellation token. The stream has been disposed. The operation was canceled via the cancellation token. An I/O error occurred. An SMTP protocol error occurred. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. The buffer to write. The offset of the first byte to write. The number of bytes to write. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream does not support writing. The operation was canceled via the cancellation token. An I/O error occurred. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. The buffer to write. The offset of the first byte to write. The number of bytes to write. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream does not support writing. An I/O error occurred. Asynchronously writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. A task that represents the asynchronous write operation. The buffer to write. The offset of the first byte to write. The number of bytes to write. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream does not support writing. The operation was canceled via the cancellation token. An I/O error occurred. Clears all buffers for this stream and causes any buffered data to be written to the underlying device. Clears all buffers for this stream and causes any buffered data to be written to the underlying device. The cancellation token. The stream has been disposed. The stream does not support writing. The operation was canceled via the cancellation token. An I/O error occurred. Clears all buffers for this stream and causes any buffered data to be written to the underlying device. Clears all buffers for this stream and causes any buffered data to be written to the underlying device. The stream has been disposed. The stream does not support writing. An I/O error occurred. Asynchronously clears all buffers for this stream and causes any buffered data to be written to the underlying device. Clears all buffers for this stream and causes any buffered data to be written to the underlying device. A task that represents the asynchronous flush operation. The cancellation token. The stream has been disposed. The stream does not support writing. The operation was canceled via the cancellation token. An I/O error occurred. Sets the position within the current stream. The new position within the stream. The offset into the stream relative to the . The origin to seek from. The stream does not support seeking. Sets the length of the stream. The desired length of the stream in bytes. The stream does not support setting the length. Releases the unmanaged resources used by the and optionally releases the managed resources. Releases the unmanaged resources used by the and optionally releases the managed resources. to release both managed and unmanaged resources; to release only the unmanaged resources. Delivery status notification type. The delivery status notification type specifies whether or not the full message should be included in any failed DSN issued for a message transmission as opposed to just the headers. The return type is unspecified, allowing the server to choose. The full message should be included in any failed delivery status notification issued by the server. Only the headers should be included in any failed delivery status notification issued by the server. An interface for resources that support acquiring channel-binding tokens. An interface for resources that support acquiring channel-binding tokens. Try to get a channel-binding. Tries to get the specified channel-binding. The kind of channel-binding desired. The channel-binding. if the channel-binding token was acquired; otherwise, . Try to get a channel-binding token. Tries to get the specified channel-binding token. The kind of channel-binding desired. The channel-binding token. if the channel-binding token was acquired; otherwise, . Try to get a channel-binding. Tries to get the specified channel-binding. The kind of channel-binding desired. The channel-binding. if the channel-binding token was acquired; otherwise, . Try to get a channel-binding token. Tries to get the specified channel-binding. The kind of channel-binding desired. The channel-binding token. if the channel-binding token was acquired; otherwise, . An annotation-based search query. An annotation-based search query. Initializes a new instance of the class. Creates a new annotation-based search query. The annotation entry. The annotation attribute. The annotation attribute value. is . -or- is . is not a valid attribute for searching. Get the annotation entry. Gets the annotation entry. The annotation entry. Get the annotation attribute. Gets the annotation attribute. The annotation attribute. Get the annotation attribute value. Gets the annotation attribute value. The annotation attribute value. A binary search query such as an AND or OR expression. A binary search query such as an AND or OR expression. Initializes a new instance of the class. Creates a new binary search query. THe search term. The left expression. The right expression. is . -or- is . Gets the left operand of the expression. Gets the left operand of the expression. The left operand. Gets the right operand of the expression. Gets the right operand of the expression. The right operand. A date-based search query. A date-based search query. Initializes a new instance of the class. Creates a new date-based search query. The search term. The date. Gets the date value of the search query. Gets the date value of the search query. The date. A filter-based search query. A filter-based search query. Initializes a new instance of the class. A search query that references a predefined filter. The name of the filter. is . is empty. Initializes a new instance of the class. A search query that references a predefined filter. The metadata tag representing the filter. does not reference a valid filter. Get the name of the filter. Gets the name of the filter. The name of the filter. A header-based search query. A header-based search query. Initializes a new instance of the class. Creates a new header search query. The header field name. The value to match against. is . -or- is . is empty. Gets the header field name. Gets the header field name. The header field. Gets the value to match against. Gets the value to match against. The value. A numeric search query. A numeric search query. Initializes a new instance of the class. Creates a new numeric search query. The search term. The numeric value. Gets the numeric value to match against. Gets the numeric value to match against. The numeric value. Specifies a sort order for search results. You can combine multiple rules to specify the sort order that should return the results in. Initializes a new instance of the class. Creates a new instance. The field to sort by. The sort order. cannot be . Gets the field used for sorting. Gets the field used for sorting. The field used for sorting. Gets the sort order. Gets the sort order. The sort order. Sort results by arrival date in ascending order. Sort results by arrival date in ascending order. Sort results by arrival date in descending order. Sort results by arrival date in descending order. Sort results by the first email address in the Cc header in ascending order. Sort results by the first email address in the Cc header in ascending order. Sort results by the first email address in the Cc header in descending order. Sort results by the first email address in the Cc header in descending order. Sort results by the sent date in ascending order. Sort results by the sent date in ascending order. Sort results by the sent date in descending order. Sort results by the sent date in descending order. Sort results by the first email address in the From header in ascending order. Sort results by the first email address in the From header in ascending order. Sort results by the first email address in the From header in descending order. Sort results by the first email address in the From header in descending order. Sort results by the first display name in the From header in ascending order. Sort results by the first display name in the From header in ascending order. Sort results by the first display name in the From header in descending order. Sort results by the first display name in the From header in descending order. Sort results by the message size in ascending order. Sort results by the message size in ascending order. Sort results by the message size in descending order. Sort results by the message size in descending order. Sort results by the Subject header in ascending order. Sort results by the Subject header in ascending order. Sort results by the Subject header in descending order. Sort results by the Subject header in descending order. Sort results by the first email address in the To header in ascending order. Sort results by the first email address in the To header in ascending order. Sort results by the first email address in the To header in descending order. Sort results by the first email address in the To header in descending order. Sort results by the first display name in the To header in ascending order. Sort results by the first display name in the To header in ascending order. Sort results by the first display name in the To header in descending order. Sort results by the first display name in the To header in descending order. Specifies an annotation-based sort order for search results. You can combine multiple rules to specify the sort order that should return the results in. Initializes a new instance of the class. Creates a new . The annotation entry to sort by. The annotation attribute to use for sorting. The sort order. is . -or- is . is not a valid attribute for sorting. Get the annotation entry. Gets the annotation entry. The annotation entry. Get the annotation attribute. Gets the annotation attribute. The annotation attribute. The field to sort by. The field to sort by. Sort by an annotation value. Sort by the arrival date. Sort by the Cc header. Sort by the Date header. Sort by the Display Name of the From header. Sort by the Display Name of the To header. Sort by the From header. Sort by the mod-sequence. Sort by the message size. Sort by the message subject. Sort by the To header. Advanced search options. Advanced search options. No options specified. Returns all of the matching unique identifiers. Returns the number of messages that match the search query. Returns the minimum unique identifier of the messages that match the search query. Returns the maximum unique identifier of the messages that match the search query. Returns the relevancy scores of the messages that match the query. Can only be used when using FUZZY search. A specialized query for searching messages in a . A specialized query for searching messages in a . Initializes a new instance of the class. Creates a new that matches all messages. Initializes a new instance of the class. Creates a new with the specified search term. The search term. Get the search term used by the search query. Gets the search term used by the search query. The term. Match all messages in the folder. Matches all messages in the folder. This is equivalent to the ALL search key as defined in rfc3501. Create a conditional AND operation. A conditional AND operation only evaluates the second operand if the first operand evaluates to true. A representing the conditional AND operation. The first operand. The second operand. is . -or- is . Create a conditional AND operation. A conditional AND operation only evaluates the second operand if the first operand evaluates to true. A representing the conditional AND operation. An additional query to execute. is . Match messages with the specified annotation. Matches messages with the specified annotation. This is equivalent to the ANNOTATION search key as defined in rfc5257 and is therefor only available for use with IMAP servers that support the ANNOTATE extension. The annotation entry. The annotation attribute. The annotation attribute value. A . is . -or- is . is not a valid attribute for searching. Match messages with the flag set. Matches messages with the flag set. This is equivalent to the ANSWERED search key as defined in rfc3501. Match messages where the Bcc header contains the specified text. Matches messages where the Bcc header contains the specified text. This is equivalent to the BCC search key as defined in rfc3501. A . The text to match against. is . is empty. Match messages where the message body contains the specified text. Matches messages where the message body contains the specified text. This is equivalent to the BODY search key as defined in rfc3501. A . The text to match against. is . is empty. Match messages where the Cc header contains the specified text. Matches messages where the Cc header contains the specified text. This is equivalent to the CC search key as defined in rfc3501. A . The text to match against. is . is empty. Match messages that have mod-sequence values greater than or equal to the specified mod-sequence value. Matches messages that have mod-sequence values greater than or equal to the specified mod-sequence value. This is equivalent to the MODSEQ search key as defined in rfc4551 and is therefor only available for use with IMAP servers that support the CONDSTORE extension. A . The mod-sequence value. Match messages with the flag set. Matches messages with the flag set. This is equivalent to the DELETED search key as defined in rfc3501. Match messages that were delivered after the specified date. Matches messages that were delivered after the specified date. The resolution of this search query does not include the time. This is equivalent to the SINCE search key as defined in rfc3501. A . The date. Match messages that were delivered before the specified date. Matches messages that were delivered before the specified date. The resolution of this search query does not include the time. This is equivalent to the BEFORE search key as defined in rfc3501. A . The date. Match messages that were delivered on the specified date. Matches messages that were delivered on the specified date. The resolution of this search query does not include the time. This is equivalent to the ON search key as defined in rfc3501. A . The date. Match messages with the flag set. Matches messages with the flag set. This is equivalent to the DRAFT search key as defined in rfc3501. Match messages using a saved search filter. Matches messages using a saved search filter. This is equivalent to the FILTER search key as defined in rfc5466 and is therefor only available for use with IMAP servers that support the FILTERS extension. A . The name of the saved search. Match messages using a saved search filter. Matches messages using a saved search filter. This is equivalent to the FILTER search key as defined in rfc5466 and is therefor only available for use with IMAP servers that support the FILTERS extension. A . The name of the saved search. Match messages with the flag set. Matches messages with the flag set. This is equivalent to the FLAGGED search key as defined in rfc3501. Match messages where the From header contains the specified text. Matches messages where the From header contains the specified text. This is equivalent to the FROM search key as defined in rfc3501. A . The text to match against. is . is empty. Apply a fuzzy matching algorithm to the specified expression. Applies a fuzzy matching algorithm to the specified expression. This is equivalent to the OLDER search key as defined in rfc6203 and is therefor only available for use with IMAP servers that support the SEARCH=FUZZY extension. A . The expression is . Match messages that have the specified flags set. Matches messages that have the specified flag(s) set. Maps each flag to the corresponding search key (ANSWERED, DELETED, DRAFT, FLAGGED, RECENT or SEEN) as defined in rfc3501. A . The message flags. does not specify any valid message flags. Match messages that do not have any of the specified flags set. Matches messages that do not have any of the specified flags set. Maps each flag to the corresponding search key (UNANSWERED, UNDELETED, UNDRAFT, UNFLAGGED, OLD or UNSEEN) as defined in rfc3501. A . The message flags. does not specify any valid message flags. Match messages that have the specified keyword set. Matches messages that have the specified keyword set. A keyword is a user-defined message flag that can be set (or unset) on a message. This is equivalent to the KEYWORD search key as defined in rfc3501. A . The keyword. is . is empty. Match messages that have all of the specified keywords set. Matches messages that have all of the specified keywords set. A keyword is a user-defined message flag that can be set (or unset) on a message. This is equivalent to AND-ing multiple KEYWORD search keys as defined in rfc3501. A . The keywords. is . One or more of the is or empty. -or- No keywords were given. Match messages that have all of the specified keywords set. Matches messages that have all of the specified keywords set. A keyword is a user-defined message flag that can be set (or unset) on a message. This is equivalent to AND-ing multiple KEYWORD search keys as defined in rfc3501. A . The keywords. is . One or more of the is or empty. -or- No keywords were given. Match messages that do not have the specified keyword set. Matches messages that do not have the specified keyword set. A keyword is a user-defined message flag that can be set (or unset) on a message. This is equivalent to the UNKEYWORD search key as defined in rfc3501. A . The keyword. is . is empty. Match messages that do not have any of the specified keywords set. Matches messages that do not have any of the specified keywords set. A keyword is a user-defined message flag that can be set (or unset) on a message. This is equivalent to AND-ing multiple UNKEYWORD search keys as defined in rfc3501. A . The keywords. is . One or more of the is or empty. -or- No keywords were given. Match messages that do not have any of the specified keywords set. Matches messages that do not have any of the specified keywords set. A keyword is a user-defined message flag that can be set (or unset) on a message. This is equivalent to AND-ing multiple UNKEYWORD search keys as defined in rfc3501. A . The keywords. is . One or more of the is or empty. -or- No keywords were given. Match messages where the specified header contains the specified text. Matches messages where the specified header contains the specified text. This is equivalent to the HEADER search key as defined in rfc3501. A . The header field to match against. The text to match against. is . -or- is . is empty. Match messages that are larger than the specified number of octets. Matches messages that are larger than the specified number of octets. This is equivalent to the LARGER search key as defined in rfc3501. A . The number of octets. is a negative value. Match messages that contain the specified text in either the header or the body. Matches messages that contain the specified text in either the header or the body. This is equivalent to the TEXT search key as defined in rfc3501. A . The text to match against. is . is empty. Match messages with the flag set but not the . Matches messages with the flag set but not the . This is equivalent to the NEW search key as defined in rfc3501. Create a logical negation of the specified expression. Creates a logical negation of the specified expression. This is equivalent to the NOT search key as defined in rfc3501. A . The expression is . Match messages that do not have the flag set. Matches messages that do not have the flag set. This is equivalent to the UNANSWERED search key as defined in rfc3501. Match messages that do not have the flag set. Matches messages that do not have the flag set. This is equivalent to the UNDELETED search key as defined in rfc3501. Match messages that do not have the flag set. Matches messages that do not have the flag set. This is equivalent to the UNDRAFT search key as defined in rfc3501. Match messages that do not have the flag set. Matches messages that do not have the flag set. This is equivalent to the UNFLAGGED search key as defined in rfc3501. Match messages that do not have the flag set. Matches messages that do not have the flag set. This is equivalent to the OLD search key as defined in rfc3501. Match messages that do not have the flag set. Matches messages that do not have the flag set. This is equivalent to the UNSEEN search key as defined in rfc3501. Match messages that do not have the flag set. Matches messages that do not have the flag set. This is equivalent to the OLD search key as defined in rfc3501. Match messages older than the specified number of seconds. Matches messages older than the specified number of seconds. This is equivalent to the OLDER search key as defined in rfc5032 and is therefor only available for use with IMAP servers that support the WITHIN extension. A . The number of seconds. The number of seconds cannot be less than 1. Create a conditional OR operation. A conditional OR operation only evaluates the second operand if the first operand evaluates to false. This is equivalent to the OR search key as defined in rfc3501. A representing the conditional OR operation. The first operand. The second operand. is . -or- is . Create a conditional OR operation. A conditional OR operation only evaluates the second operand if the first operand evaluates to true. This is equivalent to the OR search key as defined in rfc3501. A representing the conditional AND operation. An additional query to execute. is . Match messages with the flag set. Matches messages with the flag set. This is equivalent to the RECENT search key as defined in rfc3501. Match all messages in the mailbox when the underlying storage of that mailbox supports the save date attribute. Matches all messages in the mailbox when the underlying storage of that mailbox supports the save date attribute. Conversely, it matches no messages in the mailbox when the save date attribute is not supported. This is equivalent to the SAVEDATESUPPORTED search key as defined in rfc8514, section 4.3 and is therefor only available for use with IMAP servers that support the SAVEDATE extension. Match messages that were saved to the mailbox before the specified date. Matches messages that were saved to the mailbox before the specified date. The resolution of this search query does not include the time. This is equivalent to the SAVEDBEFORE search key as defined in rfc8514, section 4.3 and is therefor only available for use with IMAP servers that support the SAVEDATE extension. A . The date. Match messages that were saved to the mailbox on the specified date. Matches messages that were saved to the mailbox on the specified date. The resolution of this search query does not include the time. This is equivalent to the SAVEDON search key as defined in rfc8514, section 4.3 and is therefor only available for use with IMAP servers that support the SAVEDATE extension. A . The date. Match messages that were saved to the mailbox since the specified date. Matches messages that were saved to the mailbox since the specified date. The resolution of this search query does not include the time. This is equivalent to the SAVEDSINCE search key as defined in rfc8514, section 4.3 and is therefor only available for use with IMAP servers that support the SAVEDATE extension. A . The date. Match messages with the flag set. Matches messages with the flag set. This is equivalent to the SEEN search key as defined in rfc3501. Match messages that were sent before the specified date. Matches messages that were sent before the specified date. The resolution of this search query does not include the time. This is equivalent to the SENTBEFORE search key as defined in rfc3501. A . The date. Match messages that were sent on the specified date. Matches messages that were sent on the specified date. The resolution of this search query does not include the time. This is equivalent to the SENTON search key as defined in rfc3501. A . The date. Match messages that were sent since the specified date. Matches messages that were sent since the specified date. The resolution of this search query does not include the time. This is equivalent to the SENTSINCE search key as defined in rfc3501. A . The date. Match messages that are smaller than the specified number of octets. Matches messages that are smaller than the specified number of octets. This is equivalent to the SMALLER search key as defined in rfc3501. A . The number of octets. is a negative value. Match messages where the Subject header contains the specified text. Matches messages where the Subject header contains the specified text. This is equivalent to the SUBJECT search key as defined in rfc3501. A . The text to match against. is . is empty. Match messages where the To header contains the specified text. Matches messages where the To header contains the specified text. This is equivalent to the TO search key as defined in rfc3501. A . The text to match against. is . is empty. Limit the search query to messages with the specified unique identifiers. Limits the search query to messages with the specified unique identifiers. This is equivalent to the UID search key as defined in rfc3501. A . The unique identifiers. is . is empty. Match messages younger than the specified number of seconds. Matches messages younger than the specified number of seconds. This is equivalent to the YOUNGER search key as defined in rfc5032 and is therefor only available for use with IMAP servers that support the WITHIN extension. A . The number of seconds. The number of seconds cannot be less than 1. Match messages that have the specified GMail message identifier. Matches messages that have the specified GMail message identifier. This is equivalent to the X-GM-MSGID search key as defined in Google's IMAP extensions and is therefor only available for use with IMAP servers that support the X-GM-EXT1 extension. A . The GMail message identifier. Match messages belonging to the specified GMail thread. Matches messages belonging to the specified GMail thread. This is equivalent to the X-GM-THRID search key as defined in Google's IMAP extensions and is therefor only available for use with IMAP servers that support the X-GM-EXT1 extension. A . The GMail thread. Match messages that have the specified GMail label. Matches messages that have the specified GMail label. This is equivalent to the X-GM-LABELS search key as defined in Google's IMAP extensions and is therefor only available for use with IMAP servers that support the X-GM-EXT1 extension. A . The GMail label. is . is empty. Match messages using the GMail search expression. Matches messages using Google's custom message search syntax. This is equivalent to the X-GM-RAW search key as defined in Google's IMAP extensions and is therefor only available for use with IMAP servers that support the X-GM-EXT1 extension. A . The raw GMail search text. is . is empty. The results of a search. The results of a search. Initializes a new instance of the class. Creates a new . The UID validity value. The sort-order to use for the unique identifiers. Initializes a new instance of the class. Creates a new . The sort-order to use for the unique identifiers. Get or set the unique identifiers of the messages that matched the search query. Gets or sets the unique identifiers of the messages that matched the search query. The unique identifiers. Get or set the number of messages that matched the search query. Gets or sets the number of messages that matched the search query. The count. Get or set the minimum unique identifier that matched the search query. Gets or sets the minimum unique identifier that matched the search query. The minimum unique identifier. Get or set the maximum unique identifier that matched the search query. Gets or sets the maximum unique identifier that matched the search query. The maximum unique identifier. Gets or sets the mod-sequence identifier of the messages that matched the search query. Gets or sets the mod-sequence identifier of the messages that matched the search query. The mod-sequence identifier. Gets or sets the relevancy scores of the messages that matched the search query. Gets or sets the relevancy scores of the messages that matched the search query. The relevancy scores. A search term. The search term as used by . A search term that matches all messages. A search term that logically combines 2 or more other search expressions such that messages must match both expressions. A search term that matches messages that have the specified annotation. A search term that matches answered messages. A search term that matches messages that contain a specified string within the Bcc header. A search term that matches messages that contain a specified string within the body of the message. A search term that matches messages that contain a specified string within the Cc header. A search term that matches deleted messages. A search term that matches messages delivered after a specified date. A search term that matches messages delivered before a specified date. A search term that matches messages delivered on a specified date. A search term that matches draft messages. A search term that makes use of a predefined filter. A search term that matches flagged messages. A search term that matches messages that contain a specified string within the From header. A search term that modifies another search expression to allow fuzzy matching. A search term that matches messages that contain a specified string within a particular header. A search term that matches messages that contain a specified keyword. A search term that matches messages that are larger than a specified number of bytes. A search term that matches messages that contain a specified string anywhere within the message. A search term that matches messages that have the specified modification sequence value. A search term that matches new messages. A search term that modifies another search expression such that messages must match the logical inverse of the expression. A search term that matches messages that have not been answered. A search term that matches messages that have not been deleted. A search term that matches messages that are not drafts. A search term that matches messages that have not been flagged. A search term that matches messages that do not contain a specified keyword. A search term that matches messages that are not recent. A search term that matches messages that have not been seen. A search term that matches messages that are older than a specified date. A search term that logically combines 2 or more other search expressions such that messages only need to match one of the expressions. A search term that matches messages that are recent. A search term that matches all messages in the mailbox when the underlying storage of that mailbox supports the save date attribute. Conversely, it matches no messages in the mailbox when the save date attribute is not supported. A search term that matches messages that were saved to the mailbox before a specified date. A search term that matches messages that were saved to the mailbox on a specified date. A search term that matches messages that were saved to the mailbox since a specified date. A search term that matches messages that have been seen. A search term that matches messages that were sent before a specified date. A search term that matches messages that were sent on a specified date. A search term that matches messages that were sent since a specified date. A search term that matches messages that are smaller than a specified number of bytes. A search term that matches messages that contain a specified string within the Subject header. A search term that matches messages that contain a specified string within the To header. A search term that matches messages included within a specified set of unique identifiers. A search term that matches messages that are younger than a specified date. A search term that matches messages with a specified GMail message identifier. A search term that matches messages with a specified GMail thread (conversation) identifier. A search term that matches messages with the specified GMail labels. A search term that uses the GMail search syntax. An enumeration of sort orders. An enumeration of sort orders. No sorting order. Sort in ascending order. Sort in descending order. A text-based search query. A text-based search query. Initializes a new instance of the class. Creates a new text-based search query. The search term. The text to match against. is . is empty. Gets the text to match against. Gets the text to match against. The text. A unique identifier-based search query. A unique identifier-based search query. Initializes a new instance of the class. Creates a new unique identifier-based search query. The unique identifiers to match against. is . is empty. Initializes a new instance of the class. Creates a new unique identifier-based search query. The unique identifier to match against. is an invalid unique identifier. Gets the unique identifiers to match against. Gets the unique identifiers to match against. The unique identifiers. A unary search query such as a NOT expression. A unary search query such as a NOT expression. Initializes a new instance of the class. Creates a new unary search query. The search term. The operand. is . Gets the inner operand. Gets the inner operand. The operand. An abstract NTLM attribute and value pair. An abstract NTLM attribute and value pair. Initializes a new instance of the class. Creates a new NTLM attribute and value pair. The NTLM attribute. Get the NTLM attribute that this pair represents. Gets the NTLM attribute that this pair represents. The NTLM attribute. Get the number of bytes needed for encoding the attribute value. Gets the number of bytes needed for encoding the attribute value. The text encoding. The number of bytes needed to encode the value. Encode the attribute value to the specified buffer. Encodes the attribute value to the specified buffer. The text encoding. The output buffer. The index into the buffer to start appending the encoded attribute. An NTLM attribute and value pair consisting of a string value. An NTLM attribute and value pair consisting of a string value. Initializes a new instance of the class. Creates a new NTLM attribute and value pair consisting of a string value. The NTLM attribute. The NTLM attribute value. Get or set the value of the attribute. Gets or sets the value of the attribute. The attribute value. Get the number of bytes needed for encoding the attribute value. Gets the number of bytes needed for encoding the attribute value. The text encoding. The number of bytes needed to encode the value. Encode the attribute value to the specified buffer. Encodes the attribute value to the specified buffer. The text encoding. The output buffer. The index into the buffer to start appending the encoded attribute. An NTLM attribute and value pair consisting of a flags value. An NTLM attribute and value pair consisting of a flags value. Initializes a new instance of the class. Creates a new NTLM attribute and value pair consisting of a flags value. The NTLM attribute. The NTLM attribute value. The size of the encoded flags value. Initializes a new instance of the class. Creates a new NTLM attribute and value pair consisting of a flags value. The NTLM attribute. The NTLM attribute value. Get or set the size of the encoded flags value. Gets or sets the size of the encoded flags value. Get or set the value of the attribute. Gets or sets the value of the attribute. The attribute value. Get the number of bytes needed for encoding the attribute value. Gets the number of bytes needed for encoding the attribute value. The text encoding. The number of bytes needed to encode the value. Encode the attribute value to the specified buffer. Encodes the attribute value to the specified buffer. The text encoding. The output buffer. The index into the buffer to start appending the encoded attribute. An NTLM attribute and value pair consisting of a timestamp value. An NTLM attribute and value pair consisting of a timestamp value. Initializes a new instance of the class. Creates a new NTLM attribute and value pair consisting of a timestamp value. The NTLM attribute. The NTLM attribute value. The size of the encoded flags value. Initializes a new instance of the class. Creates a new NTLM attribute and value pair consisting of a timestamp value. The NTLM attribute. The NTLM attribute value. Get or set the size of the encoded timestamp value. Gets or sets the size of the encoded timestamp value. Get or set the value of the attribute. Gets or sets the value of the attribute. The attribute value. Get the number of bytes needed for encoding the attribute value. Gets the number of bytes needed for encoding the attribute value. The text encoding. The number of bytes needed to encode the value. Encode the attribute value to the specified buffer. Encodes the attribute value to the specified buffer. The text encoding. The output buffer. The index into the buffer to start appending the encoded attribute. An NTLM attribute and value pair consisting of a byte array value. An NTLM attribute and value pair consisting of a byte array value. Initializes a new instance of the class. Creates a new NTLM attribute and value pair consisting of a byte array value. The NTLM attribute. The NTLM attribute value. Get or set the value of the attribute. Gets or sets the value of the attribute. The attribute value. Get the number of bytes needed for encoding the attribute value. Gets the number of bytes needed for encoding the attribute value. The text encoding. The number of bytes needed to encode the value. Encode the attribute value to the specified buffer. Encodes the attribute value to the specified buffer. The text encoding. The output buffer. The index into the buffer to start appending the encoded attribute. This is only used for unit testing purposes. This is only used for unit testing purposes. The NTLM message header flags. More details here: http://davenport.sourceforge.net/ntlm.html#theNtlmMessageHeaderLayout and at https://msdn.microsoft.com/en-us/library/cc236650.aspx Indicates that Unicode strings are supported for use in security buffer data. Indicates that OEM strings are supported for use in security buffer data. Requests that the server's authentication realm be included in the Type 2 message. This flag's usage has not been identified. Specifies that authenticated communication between the client and server should carry a digital signature (message integrity). Specifies that authenticated communication between the client and server should be encrypted (message confidentiality). Indicates that datagram authentication is being used. Indicates that the Lan Manager Session Key should be used for signing and sealing authenticated communications. This flag is unused and MUST be zero. (r8) Indicates that NTLM authentication is being used. This flag is unused and MUST be zero. (r8) Sent by the client in the Type 3 message to indicate that an anonymous context has been established. This also affects the response fields. Sent by the client in the Type 1 message to indicate that the name of the domain in which the client workstation has membership is included in the message. This is used by the server to determine whether the client is eligible for local authentication. Sent by the client in the Type 1 message to indicate that the client workstation's name is included in the message. This is used by the server to determine whether the client is eligible for local authentication. Sent by the server to indicate that the server and client are on the same machine. Implies that the client may use the established local credentials for authentication instead of calculating a response to the challenge. Indicates that authenticated communication between the client and server should be signed with a "dummy" signature. Sent by the server in the Type 2 message to indicate that the target authentication realm is a domain. Sent by the server in the Type 2 message to indicate that the target authentication realm is a server. Sent by the server in the Type 2 message to indicate that the target authentication realm is a share. Presumably, this is for share-level authentication. Usage is unclear. If set, requests usage of the NTLM v2 session security. NTLM v2 session security is a misnomer because it is not NTLM v2. It is NTLM v1 using the extended session security that is also in NTLM v2. NTLMSSP_NEGOTIATE_LM_KEY and NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY are mutually exclusive. If both NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY and NTLMSSP_NEGOTIATE_LM_KEY are requested, NTLMSSP_NEGOTIATE_EXTENDED_SESSIONSECURITY alone MUST be returned to the client. NTLM v2 authentication session key generation MUST be supported by both the client and the DC in order to be used, and extended session security signing and sealing requires support from the client and the server in order to be used. This flag's usage has not been identified. This flag is unused and MUST be zero. (r5) Indicates that the LMOWF function should be used to generate a session key. Sent by the server in the Type 2 message to indicate that it is including a Target Information block in the message. The Target Information block is used in the calculation of the NTLMv2 response. This flag is unused and MUST be zero. (r4) Indicates that the version field is present. This flag is unused and MUST be zero. (r3) This flag is unused and MUST be zero. (r2) This flag is unused and MUST be zero. (r1) Indicates that 128-bit encryption is supported. Indicates that the client will provide an encrypted master key in the "Session Key" field of the Type 3 message. Indicates that 56-bit encryption is supported. An NTLM SingleHostData structure. An NTLM SingleHostData structure. Initializes a new instance of the class. Creates a new . The raw target info buffer to decode. The starting index of the single host data structure. The length of the single host data structure. Initializes a new instance of the class. Creates a new . The 8-byte platform-specific blob. The 256-bit randomly generated machine id. is . -or- is . is not 8 bytes. -or- is not 32 bytes. Get or set an 8-byte platform-specific blob. Gets or sets an 8-byte platform-specific blob. Get the 256-bit randomly generated machine ID. Gets the 256-bit randomly generated machine ID. The 256-bit randomly generated machine ID. Get the size of the SingleHostData structure. Gets the size of the SingleHostData structure. The size of the SingleHostData structure. Encode the SingleHostData structure. Encodes the SingleHostData structure. The encoded SingleHostData structure. An NTLM TargetInfo structure. An NTLM TargetInfo structure. Initializes a new instance of the class. Creates a new . The raw target info buffer to decode. The starting index of the target info structure. The length of the target info structure. if the target info strings are unicode; otherwise, . Initializes a new instance of the class. Creates a new . Copy the attribute value pairs to another TargetInfo. Copies the attribute value pairs to another TargetInfo. Get or set the server's NetBIOS computer name. Gets or sets the server's NetBIOS computer name. The server's NetBIOS computer name if available; otherwise, . Get or set the server's NetBIOS domain name. Gets or sets the server's NetBIOS domain name. The server's NetBIOS domain name if available; otherwise, . Get or set the fully qualified domain name (FQDN) of the server. Gets or sets the fully qualified domain name (FQDN) of the server. The fully qualified domain name (FQDN) of the server if available; otherwise, . Get or set the fully qualified domain name (FQDN) of the domain. Gets or sets the fully qualified domain name (FQDN) of the domain. The fully qualified domain name (FQDN) of the domain if available; otherwise, . Get or set the fully qualified domain name (FQDN) of the forest. Gets or sets the fully qualified domain name (FQDN) of the forest. The fully qualified domain name (FQDN) of the forest if available; otherwise, . Get or set a 32-bit value indicating server or client configuration. Gets or sets a 32-bit value indicating server or client configuration. 0x00000001: Indicates to the client that the account authentication is constrained. 0x00000002: Indicates that the client is providing message integrity in the MIC field (section 2.2.1.3) in the AUTHENTICATE_MESSAGE. 0x00000004: Indicates that the client is providing a target SPN generated from an untrusted source. The 32-bit flags value if available; otherwise, . Get or set a timestamp that contains the server local time. Gets or sets a timestamp that contains the server local time. A FILETIME structure ([MS-DTYP] section 2.3.3) in little-endian byte order that contains the server local time. This structure is always sent in the CHALLENGE_MESSAGE. The local time of the server, if available; otherwise . Get or set the single host data structure. Gets or sets the single host data structure. The Value field contains a platform-specific blob, as well as a MachineID created at computer startup to identify the calling machine. The single host data structure, if available; otherwise, . Get or set the Service Principal Name (SPN) of the server. Gets or sets the Service Principal Name (SPN) of the server. The Service Principal Name (SPN) of the server, if available; otherwise, . Get or set the channel binding hash. Gets or sets the channel binding hash. An MD5 hash of the channel binding data, if available; otherwise . Encode the TargetInfo structure. Encodes the TargetInfo structure. if the strings should be encoded in Unicode; otherwise, . The encoded TargetInfo. The exception that is thrown when there is an authentication error. The exception that is thrown when there is an authentication error. Initializes a new instance of the class. Creates a new from the serialized data. The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The error message. An inner exception. Initializes a new instance of the class. Creates a new . The error message. Initializes a new instance of the class. Creates a new . An enumeration of the possible error codes that may be reported by a . An enumeration of the possible error codes that may be reported by a . The server's challenge was too long. The server's response contained an incomplete challenge. The server's challenge was invalid. The server's response did not contain a challenge. The server's challenge contained an incorrect hash. A SASL authentication exception. Typically indicates an error while parsing a server's challenge token. Initializes a new instance of the class. Deserializes a . The serialization info. The streaming context. Initializes a new instance of the class. Creates a new . The SASL mechanism. The error code. The error message. is . When overridden in a derived class, sets the with information about the exception. Serializes the state of the . The serialization info. The streaming context. is . Gets the error code. Gets the error code. The error code. Gets the name of the SASL mechanism that had the error. Gets the name of the SASL mechanism that had the error. The name of the SASL mechanism. A SASL authentication mechanism. Authenticating via a SASL mechanism may be a multi-step process. To determine if the mechanism has completed the necessary steps to authentication, check the after each call to . The supported authentication mechanisms in order of strongest to weakest. Used by the various clients when authenticating via SASL to determine which order the SASL mechanisms supported by the server should be tried. Rank authentication mechanisms in order of security. Ranks authentication mechanisms in order of security. The authentication mechanisms supported by the server. The supported authentication mechanisms in ranked order. Initializes a new instance of the class. Creates a new SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new SASL context. The user name. The password. is . -or- is . Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the mechanism. Get the user's credentials. Gets the user's credentials. The user's credentials. Get whether or not the SASL mechanism supports channel binding. Gets whether or not the SASL mechanism supports channel binding. if the SASL mechanism supports channel binding; otherwise, . Get whether or not the SASL mechanism supports an initial response (SASL-IR). Gets whether or not the SASL mechanism supports an initial response (SASL-IR). SASL mechanisms that support sending an initial client response to the server should return . if the SASL mechanism supports an initial response; otherwise, . Get or set whether the SASL mechanism has finished authenticating. Gets or sets whether the SASL mechanism has finished authenticating. if the SASL mechanism has finished authenticating; otherwise, . Get whether or not channel-binding was negotiated by the SASL mechanism. Gets whether or not channel-binding has been negotiated by the SASL mechanism. Some SASL mechanisms, such as SCRAM-SHA1-PLUS and NTLM, are able to negotiate channel-bindings. if channel-binding was negotiated; otherwise, . Get whether or not a security layer was negotiated by the SASL mechanism. Gets whether or not a security layer has been negotiated by the SASL mechanism. Some SASL mechanisms, such as GSSAPI, are able to negotiate security layers such as integrity and confidentiality protection. if a security layer was negotiated; otherwise, . Get or set the channel-binding context. Gets or sets the channel-binding context. The channel-binding context. Get or set the URI of the service. Gets or sets the URI of the service. The URI of the service. Try to get a channel-binding token. Tries to get the specified channel-binding. The kind of channel-binding desired. A buffer containing the channel-binding token. if the channel-binding token was acquired; otherwise, . Parse the server's challenge token and return the next challenge response. Parses the server's challenge token and returns the next challenge response. The next challenge response. The server's challenge token. The index into the token specifying where the server's challenge begins. The length of the server's challenge. The cancellation token. The SASL mechanism does not support SASL-IR. The operation was canceled via the cancellation token. An error has occurred while parsing the server's challenge token. Decode the base64-encoded server challenge and return the next challenge response encoded in base64. Decodes the base64-encoded server challenge and returns the next challenge response encoded in base64. The next base64-encoded challenge response. The server's base64-encoded challenge token. The cancellation token. The SASL mechanism does not support SASL-IR. The operation was canceled via the cancellation token. An error has occurred while parsing the server's challenge token. Asynchronously parse the server's challenge token and return the next challenge response. Asynchronously parses the server's challenge token and returns the next challenge response. The next challenge response. The server's challenge token. The index into the token specifying where the server's challenge begins. The length of the server's challenge. The cancellation token. The SASL mechanism does not support SASL-IR. The operation was canceled via the cancellation token. An error has occurred while parsing the server's challenge token. Asynchronously decode the base64-encoded server challenge and return the next challenge response encoded in base64. Asynchronously decodes the base64-encoded server challenge and returns the next challenge response encoded in base64. The next base64-encoded challenge response. The server's base64-encoded challenge token. The cancellation token. The SASL mechanism does not support SASL-IR. The operation was canceled via the cancellation token. An error has occurred while parsing the server's challenge token. Reset the state of the SASL mechanism. Resets the state of the SASL mechanism. Determine if the specified SASL mechanism is supported by MailKit. Use this method to make sure that a SASL mechanism is supported before calling . if the specified SASL mechanism is supported; otherwise, . The name of the SASL mechanism. is . Create an instance of the specified SASL mechanism using the supplied credentials. If unsure that a particular SASL mechanism is supported, you should first call . An instance of the requested SASL mechanism if supported; otherwise . The name of the SASL mechanism. The text encoding to use for the credentials. The user's credentials. is . -or- is . -or- is . Create an instance of the specified SASL mechanism using the supplied credentials. If unsure that a particular SASL mechanism is supported, you should first call . An instance of the requested SASL mechanism if supported; otherwise . The name of the SASL mechanism. The user's credentials. is . -or- is . Determine if the character is a non-ASCII space. This list was obtained from http://tools.ietf.org/html/rfc3454#appendix-C.1.2 if the character is a non-ASCII space; otherwise, . The character. Determine if the character is commonly mapped to nothing. This list was obtained from http://tools.ietf.org/html/rfc3454#appendix-B.1 if the character is commonly mapped to nothing; otherwise, . The character. Determine if the character is prohibited. This list was obtained from http://tools.ietf.org/html/rfc3454#appendix-C.3 if the character is prohibited; otherwise, . The string. The character index. Prepare the user name or password string. Prepares a user name or password string according to the rules of rfc4013. The prepared string. The string to prepare. is . contains prohibited characters. The ANONYMOUS SASL mechanism. The ANONYMOUS SASL mechanism provides a way to authenticate with servers that allow anonymous access. Initializes a new instance of the class. Creates a new ANONYMOUS SASL context. The encoding to use for the user's credentials. The user's credentials. is . -or- is . Initializes a new instance of the class. Creates a new ANONYMOUS SASL context. The encoding to use for the user's credentials. The user name. is . -or- is . Initializes a new instance of the class. Creates a new ANONYMOUS SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new ANONYMOUS SASL context. The user name. is . Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the SASL mechanism. Get whether or not the mechanism supports an initial response (SASL-IR). Gets whether or not the mechanism supports an initial response (SASL-IR). SASL mechanisms that support sending an initial client response to the server should return . if the mechanism supports an initial response; otherwise, . Parse the server's challenge token and return the next challenge response. Parses the server's challenge token and returns the next challenge response. The next challenge response. The server's challenge token. The index into the token specifying where the server's challenge begins. The length of the server's challenge. The cancellation token. The SASL mechanism does not support SASL-IR. The operation was canceled via the cancellation token. An error has occurred while parsing the server's challenge token. The CRAM-MD5 SASL mechanism. A SASL mechanism based on HMAC-MD5. Initializes a new instance of the class. Creates a new CRAM-MD5 SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new CRAM-MD5 SASL context. The user name. The password. is . -or- is . Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the SASL mechanism. Parse the server's challenge token and return the next challenge response. Parses the server's challenge token and returns the next challenge response. The next challenge response. The server's challenge token. The index into the token specifying where the server's challenge begins. The length of the server's challenge. The cancellation token. The SASL mechanism does not support SASL-IR. The operation was canceled via the cancellation token. An error has occurred while parsing the server's challenge token. The DIGEST-MD5 SASL mechanism. Unlike the PLAIN and LOGIN SASL mechanisms, the DIGEST-MD5 mechanism provides some level of protection and should be relatively safe to use even with a clear-text connection. Initializes a new instance of the class. Creates a new DIGEST-MD5 SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new DIGEST-MD5 SASL context. The user name. The password. is . -or- is . Get or set the authorization identifier. The authorization identifier is the desired user account that the server should use for all accesses. This is separate from the user name used for authentication. The authorization identifier. Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the SASL mechanism. Parse the server's challenge token and return the next challenge response. Parses the server's challenge token and returns the next challenge response. The next challenge response. The server's challenge token. The index into the token specifying where the server's challenge begins. The length of the server's challenge. The cancellation token. The SASL mechanism does not support SASL-IR. The operation was canceled via the cancellation token. An error has occurred while parsing the server's challenge token. Reset the state of the SASL mechanism. Resets the state of the SASL mechanism. The LOGIN SASL mechanism. The LOGIN SASL mechanism provides little protection over the use of plain-text passwords by obscuring the user name and password within individual base64-encoded blobs and should be avoided unless used in combination with an SSL or TLS connection. Initializes a new instance of the class. Creates a new LOGIN SASL context. The encoding to use for the user's credentials. The user's credentials. is . -or- is . Initializes a new instance of the class. Creates a new LOGIN SASL context. The encoding to use for the user's credentials. The user name. The password. is . -or- is . -or- is . Initializes a new instance of the class. Creates a new LOGIN SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new LOGIN SASL context. The user name. The password. is . -or- is . Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the SASL mechanism. Get whether or not the mechanism supports an initial response (SASL-IR). Gets whether or not the mechanism supports an initial response (SASL-IR). SASL mechanisms that support sending an initial client response to the server should return . if the mechanism supports an initial response; otherwise, . Parses the server's challenge token and returns the next challenge response. Parses the server's challenge token and returns the next challenge response. The next challenge response. The server's challenge token. The index into the token specifying where the server's challenge begins. The length of the server's challenge. The cancellation token. The SASL mechanism does not support SASL-IR. The operation was canceled via the cancellation token. An error has occurred while parsing the server's challenge token. Resets the state of the SASL mechanism. Resets the state of the SASL mechanism. The NTLM SASL mechanism. A SASL mechanism based on NTLM. Initializes a new instance of the class. Creates a new NTLM SASL context using the default network credentials. Initializes a new instance of the class. Creates a new NTLM SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new NTLM SASL context. The user name. The password. is . -or- is . This is only used for unit testing purposes. This is only used for unit testing purposes. Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the SASL mechanism. Get whether or not the SASL mechanism supports channel binding. Gets whether or not the SASL mechanism supports channel binding. if the SASL mechanism supports channel binding; otherwise, . Get whether or not channel-binding was negotiated by the SASL mechanism. Gets whether or not channel-binding has been negotiated by the SASL mechanism. Some SASL mechanisms, such as SCRAM-SHA1-PLUS and NTLM, are able to negotiate channel-bindings. if channel-binding was negotiated; otherwise, . Get whether or not the mechanism supports an initial response (SASL-IR). Gets whether or not the mechanism supports an initial response (SASL-IR). SASL mechanisms that support sending an initial client response to the server should return . if the mechanism supports an initial response; otherwise, . Get or set a value indicating whether or not the NTLM SASL mechanism should allow channel-binding. Gets or sets a value indicating whether or not the NTLM SASL mechanism should allow channel-binding. In the future, this option will disappear as channel-binding will become the default. For now, it is only an option because this feature has not been thoroughly tested. if the NTLM SASL mechanism should allow channel-binding; otherwise, . Get or set the Windows OS version to use in the NTLM negotiation (used for debugging purposes). Gets or sets the Windows OS version to use in the NTLM negotiation (used for debugging purposes). The Windows OS version. Get or set the workstation name to use for authentication. Gets or sets the workstation name to use for authentication. The workstation name. Get or set the service principal name (SPN) of the service that the client wishes to authenticate with. Get or set the service principal name (SPN) of the service that the client wishes to authenticate with. This value is optional. The service principal name (SPN) of the service that the client wishes to authenticate with. Get or set a value indicating that the caller generated the target's SPN from an untrusted source. Gets or sets a value indicating that the caller generated the target's SPN from an untrusted source. if the is unverified; otherwise, . Parse the server's challenge token and return the next challenge response. Parses the server's challenge token and returns the next challenge response. The next challenge response. The server's challenge token. The index into the token specifying where the server's challenge begins. The length of the server's challenge. The cancellation token. The SASL mechanism does not support SASL-IR. The operation was canceled via the cancellation token. An error has occurred while parsing the server's challenge token. Reset the state of the SASL mechanism. Resets the state of the SASL mechanism. The OAuth2 SASL mechanism. A SASL mechanism used by Google that makes use of a short-lived OAuth 2.0 access token. Initializes a new instance of the class. Creates a new XOAUTH2 SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new XOAUTH2 SASL context. The user name. The auth token. is . -or- is . Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the SASL mechanism. Get whether or not the mechanism supports an initial response (SASL-IR). Gets whether or not the mechanism supports an initial response (SASL-IR). SASL mechanisms that support sending an initial client response to the server should return . if the mechanism supports an initial response; otherwise, . Parse the server's challenge token and return the next challenge response. Parses the server's challenge token and returns the next challenge response. The next challenge response. The server's challenge token. The index into the token specifying where the server's challenge begins. The length of the server's challenge. The cancellation token. The SASL mechanism does not support SASL-IR. The operation was canceled via the cancellation token. An error has occurred while parsing the server's challenge token. The OAuth Bearer SASL mechanism. A SASL mechanism that makes use of a short-lived OAuth Bearer access tokens. Initializes a new instance of the class. Creates a new OAUTHBEARER SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new OAUTHBEARER SASL context. The user name. The auth token. is . -or- is . Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the SASL mechanism. Get whether or not the mechanism supports an initial response (SASL-IR). Gets whether or not the mechanism supports an initial response (SASL-IR). SASL mechanisms that support sending an initial client response to the server should return . if the mechanism supports an initial response; otherwise, . Parse the server's challenge token and return the next challenge response. Parses the server's challenge token and returns the next challenge response. The next challenge response. The server's challenge token. The index into the token specifying where the server's challenge begins. The length of the server's challenge. The cancellation token. The SASL mechanism does not support SASL-IR. The operation was canceled via the cancellation token. An error has occurred while parsing the server's challenge token. The PLAIN SASL mechanism. The PLAIN SASL mechanism provides little protection over the use of plain-text passwords by combining the user name and password and obscuring them within a base64-encoded blob and should be avoided unless used in combination with an SSL or TLS connection. Initializes a new instance of the class. Creates a new PLAIN SASL context. The encoding to use for the user's credentials. The user's credentials. is . -or- is . Initializes a new instance of the class. Creates a new PLAIN SASL context. The encoding to use for the user's credentials. The user name. The password. is . -or- is . -or- is . Initializes a new instance of the class. Creates a new PLAIN SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new PLAIN SASL context. The user name. The password. is . -or- is . Get or set the authorization identifier. The authorization identifier is the desired user account that the server should use for all accesses. This is separate from the user name used for authentication. The authorization identifier. Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the SASL mechanism. Get whether or not the mechanism supports an initial response (SASL-IR). Gets whether or not the mechanism supports an initial response (SASL-IR). SASL mechanisms that support sending an initial client response to the server should return . if the mechanism supports an initial response; otherwise, . Parse the server's challenge token and return the next challenge response. Parses the server's challenge token and returns the next challenge response. The next challenge response. The server's challenge token. The index into the token specifying where the server's challenge begins. The length of the server's challenge. The cancellation token. The SASL mechanism does not support SASL-IR. The operation was canceled via the cancellation token. An error has occurred while parsing the server's challenge token. The base class for SCRAM-based SASL mechanisms. SCRAM-based SASL mechanisms are salted challenge/response authentication mechanisms. Initializes a new instance of the class. Creates a new SCRAM-based SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new SCRAM-based SASL context. The user name. The password. is . -or- is . Get or set the authorization identifier. The authorization identifier is the desired user account that the server should use for all accesses. This is separate from the user name used for authentication. The authorization identifier. Get whether or not the mechanism supports an initial response (SASL-IR). Get whether or not the mechanism supports an initial response (SASL-IR). SASL mechanisms that support sending an initial client response to the server should return . if the mechanism supports an initial response; otherwise, . Get whether or not channel-binding was negotiated by the SASL mechanism. Gets whether or not channel-binding has been negotiated by the SASL mechanism. Some SASL mechanisms, such as SCRAM-SHA1-PLUS and NTLM, are able to negotiate channel-bindings. if channel-binding was negotiated; otherwise, . Create the HMAC context. Creates the HMAC context using the secret key. The HMAC context. The secret key. Apply the HMAC keyed algorithm. HMAC(key, str): Apply the HMAC keyed hash algorithm (defined in [RFC2104]) using the octet string represented by "key" as the key and the octet string "str" as the input string. The size of the result is the hash result size for the hash function in use. For example, it is 20 octets for SHA-1 (see [RFC3174]). The results of the HMAC keyed algorithm. The key. The string. Apply the cryptographic hash function. H(str): Apply the cryptographic hash function to the octet string "str", producing an octet string as a result. The size of the result depends on the hash result size for the hash function in use. The results of the hash. The string. Apply the exclusive-or operation to combine two octet strings. Apply the exclusive-or operation to combine the octet string on the left of this operator with the octet string on the right of this operator. The length of the output and each of the two inputs will be the same for this use. The alpha component. The blue component. Parse the server's challenge token and return the next challenge response. Parses the server's challenge token and returns the next challenge response. The next challenge response. The server's challenge token. The index into the token specifying where the server's challenge begins. The length of the server's challenge. The cancellation token. The SASL mechanism does not support SASL-IR. The operation was canceled via the cancellation token. An error has occurred while parsing the server's challenge token. Reset the state of the SASL mechanism. Resets the state of the SASL mechanism. The SCRAM-SHA-1 SASL mechanism. A salted challenge/response SASL mechanism that uses the HMAC SHA-1 algorithm. Initializes a new instance of the class. Creates a new SCRAM-SHA-1 SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new SCRAM-SHA-1 SASL context. The user name. The password. is . -or- is . Get the name of the mechanism. Gets the name of the mechanism. The name of the mechanism. Create the HMAC context. Creates the HMAC context using the secret key. The HMAC context. The secret key. Apply the cryptographic hash function. H(str): Apply the cryptographic hash function to the octet string "str", producing an octet string as a result. The size of the result depends on the hash result size for the hash function in use. The results of the hash. The string. The SCRAM-SHA-1-PLUS SASL mechanism. A salted challenge/response SASL mechanism that uses the HMAC SHA-1 algorithm and Transport Layer Security (TLS) channel binding. Initializes a new instance of the class. Creates a new SCRAM-SHA-1-PLUS SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new SCRAM-SHA-1-PLUS SASL context. The user name. The password. is . -or- is . Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the SASL mechanism. Get whether or not the SASL mechanism supports channel binding. Gets whether or not the SASL mechanism supports channel binding. if the SASL mechanism supports channel binding; otherwise, . The SCRAM-SHA-256 SASL mechanism. A salted challenge/response SASL mechanism that uses the HMAC SHA-256 algorithm. Initializes a new instance of the class. Creates a new SCRAM-SHA-256 SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new SCRAM-SHA-256 SASL context. The user name. The password. is . -or- is . Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the SASL mechanism. Create the HMAC context. Creates the HMAC context using the secret key. The HMAC context. The secret key. Apply the cryptographic hash function. H(str): Apply the cryptographic hash function to the octet string "str", producing an octet string as a result. The size of the result depends on the hash result size for the hash function in use. The results of the hash. The string. The SCRAM-SHA-256-PLUS SASL mechanism. A salted challenge/response SASL mechanism that uses the HMAC SHA-256 algorithm and Transport Layer Security (TLS) channel binding. Initializes a new instance of the class. Creates a new SCRAM-SHA-256-PLUS SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new SCRAM-SHA-256-PLUS SASL context. The user name. The password. is . -or- is . Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the SASL mechanism. Get whether or not the SASL mechanism supports channel binding. Gets whether or not the SASL mechanism supports channel binding. if the SASL mechanism supports channel binding; otherwise, . The SCRAM-SHA-512 SASL mechanism. A salted challenge/response SASL mechanism that uses the HMAC SHA-512 algorithm. Initializes a new instance of the class. Creates a new SCRAM-SHA-512 SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new SCRAM-SHA-512 SASL context. The user name. The password. is . -or- is . Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the SASL mechanism. Create the HMAC context. Creates the HMAC context using the secret key. The HMAC context. The secret key. Apply the cryptographic hash function. H(str): Apply the cryptographic hash function to the octet string "str", producing an octet string as a result. The size of the result depends on the hash result size for the hash function in use. The results of the hash. The string. The SCRAM-SHA-512-PLUS SASL mechanism. A salted challenge/response SASL mechanism that uses the HMAC SHA-512 algorithm and Transport Layer Security (TLS) channel binding. Initializes a new instance of the class. Creates a new SCRAM-SHA-512-PLUS SASL context. The user's credentials. is . Initializes a new instance of the class. Creates a new SCRAM-SHA-512-PLUS SASL context. The user name. The password. is . -or- is . Get the name of the SASL mechanism. Gets the name of the SASL mechanism. The name of the SASL mechanism. Get whether or not the SASL mechanism supports channel binding. Gets whether or not the SASL mechanism supports channel binding. if the SASL mechanism supports channel binding; otherwise, . Secure socket options. Provides a way of specifying the SSL and/or TLS encryption that should be used for a connection. No SSL or TLS encryption should be used. Allow the to decide which SSL or TLS options to use (default). If the server does not support SSL or TLS, then the connection will continue without any encryption. The connection should use SSL or TLS encryption immediately. Elevates the connection to use TLS encryption immediately after reading the greeting and capabilities of the server. If the server does not support the STARTTLS extension, then the connection will fail and a will be thrown. Elevates the connection to use TLS encryption immediately after reading the greeting and capabilities of the server, but only if the server supports the STARTTLS extension. The exception that is thrown when there is an error during the SSL/TLS handshake. The exception that is thrown when there is an error during the SSL/TLS handshake. When this exception occurs, it typically means that the IMAP, POP3 or SMTP server that you are connecting to is using an SSL certificate that is either expired or untrusted by your system. Often times, mail servers will use self-signed certificates instead of using a certificate that has been signed by a trusted Certificate Authority. When your system is unable to validate the mail server's certificate because it is not signed by a known and trusted Certificate Authority, this exception will occur. You can work around this problem by supplying a custom and setting it on the client's property. Most likely, you'll want to compare the thumbprint of the server's certificate with a known value and/or prompt the user to accept the certificate (similar to what you've probably seen web browsers do when they encounter untrusted certificates). Initializes a new instance of the class. Creates a new from the serialized data. The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The error message. An inner exception. Initializes a new instance of the class. Creates a new . The error message. Initializes a new instance of the class. Creates a new . Get the server's SSL certificate. Gets the server's SSL certificate, if it is available. The server's SSL certificate. Get the certificate for the Root Certificate Authority. Gets the certificate for the Root Certificate Authority, if it is available. The Root Certificate Authority certificate. When overridden in a derived class, sets the with information about the exception. Sets the with information about the exception. The serialization info. The streaming context. is . An Access Control. An Access Control is a set of permissions available for a particular identity, controlling whether or not that identity has the ability to perform various tasks. Initializes a new instance of the class. Creates a new with the given name and access rights. The identifier name. The access rights. is . -or- is . Initializes a new instance of the class. Creates a new with the given name and access rights. The identifier name. The access rights. is . -or- is . Initializes a new instance of the class. Creates a new with the given name and no access rights. The identifier name. is . The identifier name for the access control. The identifier name for the access control. The identifier name. Get the access rights. Gets the access rights. The access rights. An Access Control List (ACL) An Access Control List (ACL) is a list of access controls defining the permissions various identities have available. Initializes a new instance of the class. Creates a new . The list of access controls. is . Initializes a new instance of the class. Creates a new . An individual Access Right to be used with ACLs. An individual Access Right meant to be used with . For more information on what rights are available, see https://tools.ietf.org/html/rfc4314#section-2.1 The access right for folder lookups. Allows the to be visible when listing folders. The access right for opening a folder and getting the status. Provides access for opening and getting the status of the folder. The access right for adding or removing the Seen flag on messages in the folder. Provides access to add or remove the flag on messages within the . The access right for adding or removing flags (other than Seen and Deleted) on messages in a folder. Provides access to add or remove the on messages (other than and ) within the folder. The access right allowing messages to be appended or copied into the folder. Provides access to append or copy messages into the folder. The access right allowing subfolders to be created. Provides access to create subfolders. The access right for deleting a folder and/or its subfolders. Provides access to delete the folder and/or any subfolders. The access right for adding or removing the Deleted flag to messages within a folder. Provides access to add or remove the flag from messages within the folder. It also provides access for setting the flag when appending a message to a folder. The access right for expunging deleted messages in a folder. Provides access to expunge deleted messages in a folder. The access right for administering the ACLs of a folder. Provides administrative access to change the ACLs for the folder. The character representing the particular access right. Represents the character value of the access right. Initializes a new instance of the struct. Creates a new struct. The access right. Determines whether the specified is equal to the current . Determines whether the specified is equal to the current . The to compare with the current . if the specified is equal to the current ; otherwise, . Determines whether two access rights are equal. Determines whether two access rights are equal. if and are equal; otherwise, . The first access right to compare. The second access right to compare. Determines whether two access rights are not equal. Determines whether two access rights are not equal. if and are not equal; otherwise, . The first access right to compare. The second access right to compare. Determines whether the specified is equal to the current . Determines whether the specified is equal to the current . The to compare with the current . if the specified is equal to the current ; otherwise, . Serves as a hash function for a object. Serves as a hash function for a object. A hash code for this instance that is suitable for use in hashing algorithms and data structures such as a hash table. Returns a that represents the current . Returns a that represents the current . A that represents the current . A set of access rights. The set of access rights for a particular identity. Initializes a new instance of the class. Creates a new set of access rights. The access rights. is . Initializes a new instance of the class. Creates a new set of access rights. The access rights. is . Initializes a new instance of the class. Creates an empty set of access rights. Get the number of access rights in the collection. Gets the number of access rights in the collection. The count. Get whether or not this set of access rights is read only. Gets whether or not this set of access rights is read only. if this collection is read only; otherwise, . Add the specified access right. Adds the specified access right if it is not already included. The access right. Add the specified access right. Adds the specified access right if it is not already included. if the right was added; otherwise, . The access right. Add the specified right. Adds the right specified by the given character. if the right was added; otherwise, . The right. Add the rights specified by the characters in the given string. Adds the rights specified by the characters in the given string. The rights. is . Add the range of specified rights. Adds the range of specified rights. The rights. is . Clears the access rights. Removes all of the access rights. Checks if the set of access rights contains the specified right. Determines whether or not the set of access rights already contains the specified right if the specified right exists; otherwise, . The access right. Copies all of the access rights to the specified array. Copies all of the access rights into the array, starting at the specified array index. The array. The array index. is . is out of range. Removes the specified access right. Removes the specified access right. if the access right was removed; otherwise, . The access right. Get the access right at the specified index. Gets the access right at the specified index. The access right at the specified index. The index. is out of range. Get the access rights enumerator. Gets the access rights enumerator. The enumerator. Get the access rights enumerator. Gets the access rights enumerator. The enumerator. Return a that represents the current . Returns a that represents the current . A that represents the current . Alert event arguments. Some implementations, such as , will emit Alert events when they receive alert messages from the server. Initializes a new instance of the class. Creates a new . The alert message. is . Gets the alert message. The alert message will be the exact message received from the server. The alert message. An annotation. An annotation. For more information about annotations, see rfc5257. Initializes a new instance of the class. Creates a new . The annotation entry. is . Get the annotation tag. Gets the annotation tag. The annotation tag. Get the annotation properties. Gets the annotation properties. The annotation properties. An annotation access level. An annotation access level. For more information about annotations, see rfc5257. Annotations are not supported. Annotations are read-only. Annotations are read-write. An annotation attribute. An annotation attribute. For more information about annotations, see rfc5257. The annotation value. Used to get or set both the private and shared values of an annotation. The shared annotation value. Used to get or set the shared value of an annotation. The private annotation value. Used to get or set the private value of an annotation. The size of an annotation value. Used to get the size of the both the private and shared annotation values. The size of a shared annotation value. Used to get the size of a shared annotation value. The size of a private annotation value. Used to get the size of a private annotation value. Initializes a new instance of the class. Creates a new . The annotation attribute specifier. is . contains illegal characters. Get the name of the annotation attribute. Gets the name of the annotation attribute. The name of the annotation attribute. Get the scope of the annotation attribute. Gets the scope of the annotation attribute. The scope of the annotation attribute. Get the annotation attribute specifier. Gets the annotation attribute specifier. The annotation attribute specifier. Determines whether the specified is equal to the current . Determines whether the specified is equal to the current . The to compare with the current . if the specified is equal to the current ; otherwise, . Determines whether two annotation attributes are equal. Determines whether two annotation attributes are equal. if and are equal; otherwise, . The first annotation attribute to compare. The second annotation attribute to compare. Determines whether two annotation attributes are not equal. Determines whether two annotation attributes are not equal. if and are not equal; otherwise, . The first annotation attribute to compare. The second annotation attribute to compare. Determine whether the specified is equal to the current . Determines whether the specified is equal to the current . The to compare with the current . if the specified is equal to the current ; otherwise, . Serves as a hash function for a object. Serves as a hash function for a object. A hash code for this instance that is suitable for use in hashing algorithms and data structures such as a hash table. Returns a that represents the current . Returns a that represents the current . A that represents the current . An annotation entry. An annotation entry. For more information about annotations, see rfc5257. An annotation entry for a comment on a message. Used to get or set a comment on a message. An annotation entry for a private comment on a message. Used to get or set a private comment on a message. An annotation entry for a shared comment on a message. Used to get or set a shared comment on a message. An annotation entry for flags on a message. Used to get or set flags on a message. An annotation entry for private flags on a message. Used to get or set private flags on a message. Aa annotation entry for shared flags on a message. Used to get or set shared flags on a message. An annotation entry for an alternate subject on a message. Used to get or set an alternate subject on a message. An annotation entry for a private alternate subject on a message. Used to get or set a private alternate subject on a message. An annotation entry for a shared alternate subject on a message. Used to get or set a shared alternate subject on a message. Initializes a new instance of the struct. Creates a new . The annotation entry path. The scope of the annotation. is . is invalid. Initializes a new instance of the struct. Creates a new for an individual body part of a message. The part-specifier of the body part of the message. The annotation entry path. The scope of the annotation. is . -or- is . is invalid. -or- is invalid. Initializes a new instance of the struct. Creates a new for an individual body part of a message. The body part of the message. The annotation entry path. The scope of the annotation. is . -or- is . is invalid. Get the annotation entry specifier. Gets the annotation entry specifier. The annotation entry specifier. Get the part-specifier component of the annotation entry. Gets the part-specifier component of the annotation entry. The part-specifier. Get the path component of the annotation entry. Gets the path component of the annotation entry. The path. Get the scope of the annotation. Gets the scope of the annotation. The scope. Determines whether the specified is equal to the current . Determines whether the specified is equal to the current . The to compare with the current . if the specified is equal to the current ; otherwise, . Determines whether two annotation entries are equal. Determines whether two annotation entries are equal. if and are equal; otherwise, . The first annotation entry to compare. The second annotation entry to compare. Determines whether two annotation entries are not equal. Determines whether two annotation entries are not equal. if and are not equal; otherwise, . The first annotation entry to compare. The second annotation entry to compare. Determine whether the specified is equal to the current . Determines whether the specified is equal to the current . The to compare with the current . if the specified is equal to the current ; otherwise, . Serves as a hash function for a object. Serves as a hash function for a object. A hash code for this instance that is suitable for use in hashing algorithms and data structures such as a hash table. Returns a that represents the current . Returns a that represents the current . A that represents the current . Parse an annotation entry. Parses an annotation entry. The annotation entry. The parsed annotation entry. is . does not conform to the annotation entry syntax. Event args used when an annotation changes. Event args used when an annotation changes. Initializes a new instance of the class. Creates a new . The message index. Initializes a new instance of the class. Creates a new . The message index. The annotations that changed. is . Get the annotations that changed. Gets the annotations that changed. The annotation. Gets the updated mod-sequence value of the message, if available. Gets the updated mod-sequence value of the message, if available. The mod-sequence value. The scope of an annotation. Represents the scope of an annotation. For more information about annotations, see rfc5257. No scopes. The private annotation scope. The shared annotation scope. Both private and shared scopes. A request for appending a message to a folder. A request for appending a message to a folder. Initializes a new instance of the class. Creates a new . The message. The message flags. is . Initializes a new instance of the class. Creates a new . The message. The message flags. The message keywords. is . -or- is . Initializes a new instance of the class. Creates a new . The message. The message flags. The internal date of the message. is . Initializes a new instance of the class. Creates a new . The message. The message flags. The message keywords. The internal date of the message. is . -or- is . Get the message that should be appended to the folder. Gets the message that should be appended to the folder. The message. Get or set the message flags that should be set on the message. Gets or sets the message flags that should be set on the message. The message flags. Get or set the keywords that should be set on the message. Gets or sets the keywords that should be set on the message. The keywords. Get or set the timestamp that should be used by folder as the . Gets or sets the timestamp that should be used by folder as the . The date and time to use for the INTERNALDATE or if it should be left up to the folder to decide. Get or set the list of annotations that should be set on the message. Gets or sets the list of annotations that should be set on the message. This feature is not supported by all folders. Use with the enum value to determine if this feature is supported. The list of annotations. Get or set the transfer progress reporting mechanism. Gets or sets the transfer progress reporting mechanism. The transfer progress mechanism. Authenticated event arguments. Some servers, such as GMail IMAP, will send some free-form text in the response to a successful login. Initializes a new instance of the class. Creates a new . The free-form text. is . Get the free-form text sent by the server. Gets the free-form text sent by the server. The free-form text sent by the server. An abstract body part of a message. Each body part will actually be a , , , or . Initializes a new instance of the class. Creates a new . Gets the Content-Type of the body part. Gets the Content-Type of the body part. The content type. Gets the part specifier. Gets the part specifier. The part specifier. Dispatches to the specific visit method for this MIME body part. This default implementation for nodes calls . Override this method to call into a more specific method on a derived visitor class of the class. However, it should still support unknown visitors by calling . The visitor. is . Encodes the into the . Encodes the into the . The string builder. Returns a that represents the current . Returns a that represents the current . The syntax of the string returned, while similar to IMAP's BODYSTRUCTURE syntax, is not completely compatible. A that represents the current . Tries to parse the given text into a new instance. Parses a body part from the specified text. This syntax, while similar to IMAP's BODYSTRUCTURE syntax, is not completely compatible. if the body part was successfully parsed; otherwise, . The text to parse. The parsed body part. is . A basic message body part. Represents any message body part that is not a multipart, message/rfc822 part, or a text part. Initializes a new instance of the class. Creates a new . Gets the Content-Id of the body part, if available. Gets the Content-Id of the body part, if available. The content identifier. Gets the Content-Description of the body part, if available. Gets the Content-Description of the body part, if available. The content description. Gets the Content-Transfer-Encoding of the body part. Gets the Content-Transfer-Encoding of the body part. Hint: Use the MimeUtils.TryParse method to parse this value into a usable . The content transfer encoding. Gets the size of the body part, in bytes. Gets the size of the body part, in bytes. Note that this size is the size in its transfer encoding and not the resulting size after any decoding. The number of octets. Gets the MD5 hash of the content, if available. Gets the MD5 hash of the content, if available. The content md5. Gets the Content-Disposition of the body part, if available. Gets the Content-Disposition of the body part, if available. The Content-Disposition value is only retrieved if the flag is used when fetching summary information from an . The content disposition. Gets the Content-Language of the body part, if available. Gets the Content-Language of the body part, if available. The Content-Language value is only retrieved if the flag is used when fetching summary information from an . The content language. Gets the Content-Location of the body part, if available. Gets the Content-Location of the body part, if available. The Content-Location value is only retrieved if the flag is used when fetching summary information from an . The content location. Determines whether or not the body part is an attachment. Determines whether or not the body part is an attachment based on the value of the Content-Disposition. Since the value of the Content-Disposition header is needed, it is necessary to include the flag when fetching summary information from an . if this part is an attachment; otherwise, . Get the name of the file. First checks for the "filename" parameter on the Content-Disposition header. If that does not exist, then the "name" parameter on the Content-Type header is used. Since the value of the Content-Disposition header is needed, it is necessary to include the flag when fetching summary information from an . The name of the file. Dispatches to the specific visit method for this MIME body part. This default implementation for nodes calls . Override this method to call into a more specific method on a derived visitor class of the class. However, it should still support unknown visitors by calling . The visitor. is . Encodes the into the . Encodes the into the . The string builder. A collection. A collection. Initializes a new instance of the class. Creates a new . Get the number of body parts in the collection. Gets the number of body parts in the collection. The count. Get whether or not this body part collection is read only. Gets whether or not this body part collection is read only. if this collection is read only; otherwise, . Add the specified body part to the collection. Adds the specified body part to the collection. The body part. is . Clears the body part collection. Removes all of the body parts from the collection. Checks if the collection contains the specified body part. Determines whether or not the collection contains the specified body part. if the specified body part exists; otherwise, . The body part. is . Copies all of the body parts in the collection to the specified array. Copies all of the body parts within the collection into the array, starting at the specified array index. The array. The array index. is . is out of range. Removes the specified body part. Removes the specified body part. if the body part was removed; otherwise, . The body part. is . Get the body part at the specified index. Gets the body part at the specified index. The body part at the specified index. The index. is out of range. Gets the index of the body part matching the specified URI. Finds the index of the body part matching the specified URI, if it exists. If the URI scheme is "cid", then matching is performed based on the Content-Id header values, otherwise the Content-Location headers are used. If the provided URI is absolute and a child part's Content-Location is relative, then then the child part's Content-Location URI will be combined with the value of its Content-Base header, if available, otherwise it will be combined with the multipart/related part's Content-Base header in order to produce an absolute URI that can be compared with the provided absolute URI. The index of the part matching the specified URI if found; otherwise -1. The URI of the body part. is . Get the body part enumerator. Gets the body part enumerator. The enumerator. Get the body part enumerator. Gets the body part enumerator. The enumerator. A message/rfc822 body part. Represents a message/rfc822 body part. Initializes a new instance of the class. Creates a new . Gets the envelope of the message, if available. Gets the envelope of the message, if available. The envelope. Gets the body structure of the message. Gets the body structure of the message. The body structure. Gets the length of the message, in lines. Gets the length of the message, in lines. The number of lines. Dispatches to the specific visit method for this MIME body part. This default implementation for nodes calls . Override this method to call into a more specific method on a derived visitor class of the class. However, it should still support unknown visitors by calling . The visitor. is . Encodes the into the . Encodes the into the . The string builder. A multipart body part. A multipart body part. Initializes a new instance of the class. Creates a new . Gets the child body parts. Gets the child body parts. The child body parts. Gets the Content-Disposition of the body part, if available. Gets the Content-Disposition of the body part, if available. The content disposition. Gets the Content-Language of the body part, if available. Gets the Content-Language of the body part, if available. The content language. Gets the Content-Location of the body part, if available. Gets the Content-Location of the body part, if available. The content location. Dispatches to the specific visit method for this MIME body part. This default implementation for nodes calls . Override this method to call into a more specific method on a derived visitor class of the class. However, it should still support unknown visitors by calling . The visitor. is . Encodes the into the . Encodes the into the . The string builder. A textual body part. Represents any body part with a media type of "text". Initializes a new instance of the class. Creates a new . Gets whether or not this text part contains plain text. Checks whether or not the text part's Content-Type is text/plain. if the text is html; otherwise, . Gets whether or not this text part contains HTML. Checks whether or not the text part's Content-Type is text/html. if the text is html; otherwise, . Gets the length of the text, in lines. Gets the length of the text, in lines. The number of lines. Dispatches to the specific visit method for this MIME body part. This default implementation for nodes calls . Override this method to call into a more specific method on a derived visitor class of the class. However, it should still support unknown visitors by calling . The visitor. is . Encodes the into the . Encodes the into the . The string builder. Represents a visitor for a tree of MIME body parts. This class is designed to be inherited to create more specialized classes whose functionality requires traversing, examining or copying a tree of MIME body parts. Initialize a new instance of the class. Creates a new . Dispatches the entity to one of the more specialized visit methods in this class. Dispatches the entity to one of the more specialized visit methods in this class. The MIME body part. Visit the abstract MIME body part. Visits the abstract MIME body part. The MIME body part. Visit the basic MIME body part. Visits the basic MIME body part. The basic MIME body part. Visit the message contained within a message/rfc822 or message/news MIME entity. Visits the message contained within a message/rfc822 or message/news MIME entity. The body part representing the message/rfc822 message. Visit the message/rfc822 or message/news MIME entity. Visits the message/rfc822 or message/news MIME entity. The message/rfc822 or message/news body part. Visit the children of a . Visits the children of a . The multipart. Visit the abstract multipart MIME entity. Visits the abstract multipart MIME entity. The multipart body part. Visit the text-based MIME part entity. Visits the text-based MIME part entity. The text-based body part. The exception that is thrown when there is a command error. A can be thrown by any of the various client methods in MailKit. Unlike a , a is typically non-fatal (meaning that it does not force the client to disconnect). Initializes a new instance of the class. Creates a new . The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The error message. An inner exception. Initializes a new instance of the class. Creates a new . The error message. Initializes a new instance of the class. Creates a new . A compressed stream. Gets the inner stream. The inner stream. Gets whether the stream supports reading. if the stream supports reading; otherwise, . Gets whether the stream supports writing. if the stream supports writing; otherwise, . Gets whether the stream supports seeking. if the stream supports seeking; otherwise, . Gets whether the stream supports I/O timeouts. if the stream supports I/O timeouts; otherwise, . Gets or sets a value, in milliseconds, that determines how long the stream will attempt to read before timing out. A value, in milliseconds, that determines how long the stream will attempt to read before timing out. The read timeout. Gets or sets a value, in milliseconds, that determines how long the stream will attempt to write before timing out. A value, in milliseconds, that determines how long the stream will attempt to write before timing out. The write timeout. Gets or sets the position within the current stream. The current position within the stream. The position of the stream. The stream does not support seeking. Gets the length in bytes of the stream. A long value representing the length of the stream in bytes. The length of the stream. The stream does not support seeking. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if the end of the stream has been reached. The buffer. The buffer offset. The number of bytes to read. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. An I/O error occurred. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if the end of the stream has been reached. The buffer. The buffer offset. The number of bytes to read. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. An I/O error occurred. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. The buffer to write. The offset of the first byte to write. The number of bytes to write. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream does not support writing. An I/O error occurred. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. A task that represents the asynchronous write operation. The buffer to write. The offset of the first byte to write. The number of bytes to write. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream does not support writing. An I/O error occurred. Clears all output buffers for this stream and causes any buffered data to be written to the underlying device. The stream has been disposed. The stream does not support writing. An I/O error occurred. Clears all output buffers for this stream and causes any buffered data to be written to the underlying device. A task that represents the asynchronous flush operation. The stream has been disposed. The stream does not support writing. An I/O error occurred. Sets the position within the current stream. The new position within the stream. The offset into the stream relative to the . The origin to seek from. The stream does not support seeking. Sets the length of the stream. The desired length of the stream in bytes. The stream does not support setting the length. Releases the unmanaged resources used by the and optionally releases the managed resources. to release both managed and unmanaged resources; to release only the unmanaged resources. Connected event arguments. When a is connected, it will emit a event. Initializes a new instance of the class. Creates a new . The name of the host that the client connected to. The port that the client connected to on the remote host. The SSL/TLS options that were used when connecting to the remote host. Get the name of the remote host. Gets the name of the remote host. The host name of the server. Get the port. Gets the port. The port. Get the SSL/TLS options. Gets the SSL/TLS options. The SSL/TLS options. Delivery status notification types. A set of flags that may be bitwise-or'd together to specify when a delivery status notification should be sent for a particular recipient. Never send delivery status notifications. Send a notification on successful delivery to the recipient. Send a notification on failure to deliver to the recipient. Send a notification when the delivery to the recipient has been delayed for an unusual amount of time. Disconnected event arguments. When a gets disconnected, it will emit a event. Initializes a new instance of the class. Initializes a new instance of the class. The name of the host that the client was connected to. The port that the client was connected to. The SSL/TLS options that were used by the client. If , the was disconnected via the method. Get whether or not the service was explicitly asked to disconnect. If the was disconnected via the method, then the value of will be . If the connection was unexpectedly dropped, then the value will be . if the disconnect was explicitly requested; otherwise, . A duplex stream. Initializes a new instance of the class. The stream to use for input. The stream to use for output. is . -or- is . Gets the input stream. The input stream. Gets the output stream. The output stream. Gets whether the stream supports reading. if the stream supports reading; otherwise, . Gets whether the stream supports writing. if the stream supports writing; otherwise, . Gets whether the stream supports seeking. if the stream supports seeking; otherwise, . Gets whether the stream supports I/O timeouts. if the stream supports I/O timeouts; otherwise, . Gets or sets a value, in milliseconds, that determines how long the stream will attempt to read before timing out. A value, in milliseconds, that determines how long the stream will attempt to read before timing out. The read timeout. Gets or sets a value, in milliseconds, that determines how long the stream will attempt to write before timing out. A value, in milliseconds, that determines how long the stream will attempt to write before timing out. The write timeout. Gets or sets the position within the current stream. The current position within the stream. The position of the stream. The stream does not support seeking. Gets the length in bytes of the stream. A long value representing the length of the stream in bytes. The length of the stream. The stream does not support seeking. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if the end of the stream has been reached. The buffer. The buffer offset. The number of bytes to read. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. An I/O error occurred. Reads a sequence of bytes from the stream and advances the position within the stream by the number of bytes read. The total number of bytes read into the buffer. This can be less than the number of bytes requested if that many bytes are not currently available, or zero (0) if the end of the stream has been reached. The buffer. The buffer offset. The number of bytes to read. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. An I/O error occurred. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. The buffer to write. The offset of the first byte to write. The number of bytes to write. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream does not support writing. An I/O error occurred. Writes a sequence of bytes to the stream and advances the current position within this stream by the number of bytes written. A task that represents the asynchronous write operation. The buffer to write. The offset of the first byte to write. The number of bytes to write. The cancellation token. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The stream has been disposed. The stream does not support writing. An I/O error occurred. Clears all output buffers for this stream and causes any buffered data to be written to the underlying device. The stream has been disposed. The stream does not support writing. An I/O error occurred. Clears all output buffers for this stream and causes any buffered data to be written to the underlying device. A task that represents the asynchronous flush operation. The cancellation token. The stream has been disposed. The stream does not support writing. An I/O error occurred. Sets the position within the current stream. The new position within the stream. The offset into the stream relative to the . The origin to seek from. The stream does not support seeking. Sets the length of the stream. The desired length of the stream in bytes. The stream does not support setting the length. Releases the unmanaged resources used by the and optionally releases the managed resources. to release both managed and unmanaged resources; to release only the unmanaged resources. A message envelope containing a brief summary of the message. The envelope of a message contains information such as the date the message was sent, the subject of the message, the sender of the message, who the message was sent to, which message(s) the message may be in reply to, and the message id. Initializes a new instance of the class. Creates a new . Gets the address(es) that the message is from. Gets the address(es) that the message is from. The address(es) that the message is from. Gets the actual sender(s) of the message. The senders may differ from the addresses in if the message was sent by someone on behalf of someone else. The actual sender(s) of the message. Gets the address(es) that replies should be sent to. The senders of the message may prefer that replies are sent somewhere other than the address they used to send the message. The address(es) that replies should be sent to. Gets the list of addresses that the message was sent to. Gets the list of addresses that the message was sent to. The address(es) that the message was sent to. Gets the list of addresses that the message was carbon-copied to. Gets the list of addresses that the message was carbon-copied to. The address(es) that the message was carbon-copied to. Gets the list of addresses that the message was blind-carbon-copied to. Gets the list of addresses that the message was blind-carbon-copied to. The address(es) that the message was carbon-copied to. The Message-Id that the message is replying to. The Message-Id that the message is replying to. The Message-Id that the message is replying to. Gets the date that the message was sent on, if available. Gets the date that the message was sent on, if available. The date the message was sent. Gets the ID of the message, if available. Gets the ID of the message, if available. The message identifier. Gets the subject of the message. Gets the subject of the message. The subject. Returns a that represents the current . The returned string can be parsed by . The syntax of the string returned, while similar to IMAP's ENVELOPE syntax, is not completely compatible. A that represents the current . Tries to parse the given text into a new instance. Parses an Envelope value from the specified text. This syntax, while similar to IMAP's ENVELOPE syntax, is not completely compatible. , if the envelope was successfully parsed, otherwise. The text to parse. The parsed envelope. is . A request for fetching various properties of a message. A request for fetching various properties of a message. Initializes a new instance of the class. Creates a new . Initializes a new instance of the class. Creates a new . The items to fetch. Initializes a new instance of the class. Creates a new . The items to fetch. The specific set of headers to fetch. is . One or more of the specified is invalid. Initializes a new instance of the class. Creates a new . The items to fetch. The specific set of headers to fetch. is . One or more of the specified is invalid. Get or set the mod-sequence value that indicates the last known state of the messages being requested. Gets or sets the mod-sequence value that indicates the last known state of the messages being requested. If this property is set, the results returned by Fetch or FetchAsync will only include the message summaries which have a higher mod-sequence value than the one specified. If the mail store supports quick resynchronization and the application has enabled this feature via , then the Fetch or FetchAsync method will emit events for messages that were expunged from the folder after the change specified by the mod-sequence value. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. The mod-sequence value that indicates the last known state of the messages being requested. Get or set the message summary items to fetch. Gets or sets the message summary items to fetch. The message summary items. Get the set of headers that will be fetched. Gets the set of headers that will be fetched. The set of headers to be fetched. A folder access mode. A folder access mode. The folder is not open. The folder is read-only. The folder is read/write. Folder attributes as used by . Folder attributes as used by . The folder does not have any attributes. It is not possible for any subfolders to exist under the folder. It is not possible to select the folder. The folder has been marked as possibly containing new messages since the folder was last selected. The folder does not contain any new messages since the folder was last selected. The folder does not exist, but is simply a place-holder. The folder is subscribed. The folder is remote. The folder has subfolders. The folder does not have any subfolders. The folder is a special "All" folder containing an aggregate of all messages. The folder is a special "Archive" folder. The folder is the special "Drafts" folder. The folder is the special "Flagged" folder. The folder is the special "Important" folder. The folder is the special "Inbox" folder. The folder is the special "Junk" folder. The folder is the special "Sent" folder. The folder is the special "Trash" folder. Event args used when a is created. Event args used when a is created. Initializes a new instance of the class. Creates a new . The newly created folder. is . Get the folder that was just created. Gets the folder that was just created. The folder. An optional feature that an may support. An optional feature that an may support. Indicates that the folder supports access rights. Indicates that the folder allows arbitrary annotations to be set on a message. Indicates that the folder allows arbitrary metadata to be set. Indicates that the folder uses modification sequences for every state change of a message. Indicates that the folder supports quick resynchronization when opening. Indicates that the folder supports quotas. Indicates that the folder supports sorting messages. Indicates that the folder supports threading messages. Indicates that the folder supports the use of UTF-8. A folder namespace. A folder namespace. The directory separator for this folder namespace. The directory separator for this folder namespace. The base path for this folder namespace. The base path for this folder namespace. Initializes a new instance of the class. Creates a new folder namespace. The directory separator. The folder path. is . A read-only collection of folder namespaces. A read-only collection of folder namespaces. Initializes a new instance of the class. Creates a new . Gets the number of folder namespaces contained in the collection. Gets the number of folder namespaces contained in the collection. The count. Adds the specified namespace. Adds the specified namespace. The namespace to add. is . Removes all namespaces from the collection. Removes all namespaces from the collection. Checks if the collection contains the specified namespace. Checks if the collection contains the specified namespace. if the specified namespace exists; otherwise, . The namespace. is . Removes the first occurrence of the specified namespace. Removes the first occurrence of the specified namespace. if the first occurrence of the specified namespace was removed; otherwise, . The namespace. is . Gets the at the specified index. Gets the at the specified index. The folder namespace at the specified index. The index. is . is out of range. Gets the enumerator. Gets the enumerator. The enumerator. Gets the enumerator. Gets the enumerator. The enumerator. Returns a that represents the current . Returns a that represents the current . A that represents the current . The exception that is thrown when a folder could not be found. This exception is thrown by . Initializes a new instance of the class. Deserializes a . The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The error message. The name of the folder. The inner exception. is . Initializes a new instance of the class. Creates a new . The error message. The name of the folder. is . Initializes a new instance of the class. Creates a new . The name of the folder. is . Gets the name of the folder that could not be found. Gets the name of the folder that could not be found. The name of the folder. When overridden in a derived class, sets the with information about the exception. Serializes the state of the . The serialization info. The streaming context. is . The exception that is thrown when a folder is not open. This exception is thrown when an operation on a folder could not be completed due to the folder being in a closed state. For example, the method will throw a if the folder is not current open. Initializes a new instance of the class. Deserializes a . The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The folder name. The minimum folder access required by the operation. The error message. The inner exception. is . Initializes a new instance of the class. Creates a new . The folder name. The minimum folder access required by the operation. The error message. is . Initializes a new instance of the class. Creates a new . The folder name. The minimum folder access required by the operation. is . Get the name of the folder. Gets the name of the folder. The name of the folder. Get the minimum folder access required by the operation. Gets the minimum folder access required by the operation. The minimum required folder access. When overridden in a derived class, sets the with information about the exception. Serializes the state of the . The serialization info. The streaming context. is . A folder quota. A is returned by . Initializes a new instance of the class. Creates a new with the specified root. The quota root. Get the quota root. Gets the quota root. If the quota root is , then it suggests that the folder does not have a quota. The quota root. Get or set the message limit. Gets or sets the message limit. The message limit. Get or set the storage limit, in kilobytes. Gets or sets the storage limit, in kilobytes. The storage limit, in kilobytes. Get or set the current message count. Gets or sets the current message count. The current message count. Gets or sets the size of the current storage, in kilobytes. Gets or sets the size of the current storage, in kilobytes. The size of the current storage, in kilobytes. Event args used when a is renamed. Event args used when a is renamed. Initializes a new instance of the class. Creates a new . The old name of the folder. The new name of the folder. is . -or- is . The old name of the folder. The old name of the folder. The old name. The new name of the folder. The new name of the folder. The new name. A set of headers. A set of headers. A set of headers that only includes all headers. When used with a , this pre-computed set of headers can be used to fetch the entire list of headers for a message. A set of headers that only includes the standard envelope headers. When used with a , this pre-computed set of headers can be used to fetch the standard envelope headers for a message. A set of headers that only includes the References header. When used with a , this pre-computed set of headers can be used to fetch the References header for a message. Generally, this should be used in combination with in order to have all of the information needed to thread messages using the threading algorithm. Initializes a new instance of the class. Creates a new . Initializes a new instance of the class. Creates a new . The headers to include. Initializes a new instance of the class. Creates a new . The headers to include. Get the number of headers in the set. Gets the number of headers in the set. The number of headers. Get or set whether this set of headers is meant to be excluded when used with a . Get or set whether this set of headers is meant to be excluded when used with a . if the headers are meant to be excluded; otherwise, . The operation is invalid because the is read-only. Get whether or not the set of headers is read-only. Gets whether or not the set of headers is read-only. if this instance is read only; otherwise, . Add the specified header. Adds the specified header to the set of headers. if the header was added to the set; otherwise, . The header to add. is not a valid . The operation is invalid because the is read-only. Add the specified header. Adds the specified header to the set of headers. if the header was added to the set; otherwise, . The header to add. is . The operation is invalid because the is read-only. Add the specified header. Adds the specified header to the set of headers. The header to add. is . The operation is invalid because the is read-only. Add a collection of headers. Adds the specified headers to the set of headers. The headers to add. is . One or more of the specified is invalid. The operation is invalid because the is read-only. Add a collection of headers. Adds the specified headers to the set of headers. The headers to add. is . One or more of the specified is invalid. The operation is invalid because the is read-only. Clear the set of headers. Clears the set of headers. The operation is invalid because the is read-only. Copy all of the headers in the to the specified array. Copies all of the headers within the into the array, starting at the specified array index. The array to copy the headers to. The index into the array. is . is out of range. Check if the set of headers contains the specified header. Determines whether or not the set of headers contains the specified header. if the specified header exists; otherwise, . The header identifier. is not a valid . Check if the set of headers contains the specified header. Determines whether or not the set of headers contains the specified header. if the specified header exists; otherwise, . The name of the header. is . Remove the specified header. Removes the specified header if it exists. if the specified header was removed; otherwise, . The header. is not a valid . The operation is invalid because the is read-only. Remove the specified header. Removes the specified header if it exists. if the specified header was removed; otherwise, . The header. is . The operation is invalid because the is read-only. Get an enumerator for the set of headers. Gets an enumerator for the set of headers. The enumerator. Get an enumerator for the set of headers. Gets an enumerator for the set of headers. The enumerator. An authentication secret. An authentication secret. Get the starting offset of the secret within a buffer. Gets the starting offset of the secret within a buffer. The start offset of the secret. Get the length of the secret within a buffer. Gets the length of the secret within a buffer. The length of the secret. Create a new . Creates a new . The start index of the secret. The length of the secret. An interface for detecting authentication secrets. An interface for detecting authentication secrets. Detect a list of secrets within a buffer. Detects a list of secrets within a buffer. The buffer. The buffer offset. The length of the buffer. A list of secrets. A request for appending a message to a folder. A request for appending a message to a folder. Get the message that should be appended to the folder. Gets the message that should be appended to the folder. The message. Get or set the message flags that should be set on the message. Gets or sets the message flags that should be set on the message. The message flags. Get or set the keywords that should be set on the message. Gets or sets the keywords that should be set on the message. The keywords. Get or set the timestamp that should be used by folder as the . Gets or sets the timestamp that should be used by folder as the . The date and time to use for the INTERNALDATE or if it should be left up to the folder to decide. Get or set the list of annotations that should be set on the message. Gets or sets the list of annotations that should be set on the message. This feature is not supported by all folders. Use with the enum value to determine if this feature is supported. The list of annotations. Get or set the transfer progress reporting mechanism. Gets or sets the transfer progress reporting mechanism. The transfer progress mechanism. A request for fetching various properties of a message. A request for fetching various properties of a message. Get or set the mod-sequence value that indicates the last known state of the messages being requested. Gets or sets the mod-sequence value that indicates the last known state of the messages being requested. If this property is set, the results returned by Fetch or FetchAsync will only include the message summaries which have a higher mod-sequence value than the one specified. If the mail store supports quick resynchronization and the application has enabled this feature via , then the Fetch or FetchAsync method will emit events for messages that were expunged from the folder after the change specified by the mod-sequence value. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. The mod-sequence value that indicates the last known state of the messages being requested. Get or set the message summary items to fetch. Gets or sets the message summary items to fetch. The message summary items. Get the set of headers that will be fetched. Gets the set of headers that will be fetched. The set of headers to be fetched. An interface for a mailbox folder as used by . Implemented by message stores such as Gets an object that can be used to synchronize access to the folder. Gets an object that can be used to synchronize access to the folder. The sync root. Get the parent folder. Root-level folders do not have a parent folder. The parent folder. Get the folder attributes. Gets the folder attributes. The folder attributes. Get the annotation access level. If annotations are supported, this property can be used to determine whether or not the supports reading and writing annotations. The annotation access level. Get the supported annotation scopes. If annotations are supported, this property can be used to determine which annotation scopes are supported by the . The supported annotation scopes. Get the maximum size of annotation values supported by the folder. If annotations are supported, this property can be used to determine the maximum size of annotation values supported by the . The maximum size of annotation values supported by the folder. Get the permanent flags. The permanent flags are the message flags that will persist between sessions. If the flag is set, then the folder allows storing of user-defined (custom) message flags. The permanent flags. Get the permanent keywords. The permanent keywords are the keywords that will persist between sessions. If the flag is set in , then the folder allows storing of user-defined keywords as well. The permanent keywords. Get the accepted flags. The accepted flags are the message flags that will be accepted and persist for the current session. For the set of flags that will persist between sessions, see the property. The accepted flags. Get the accepted keywords. The accepted keywords are the keywords that will be accepted and persist for the current session. For the set of keywords that will persist between sessions, see the property. The accepted keywords. Get the directory separator. Gets the directory separator. The directory separator. Get the read/write access of the folder. Gets the read/write access of the folder. The read/write access. Get whether or not the folder is a namespace folder. Gets whether or not the folder is a namespace folder. if the folder is a namespace folder; otherwise, . Get the full name of the folder. This is the equivalent of the full path of a file on a file system. The full name of the folder. Get the name of the folder. This is the equivalent of the file name of a file on the file system. The name of the folder. Get the unique identifier for the folder, if available. Gets a unique identifier for the folder, if available. This is useful for clients implementing a message cache that want to track the folder after it is renamed by another client. This property will only be available if the server supports the OBJECTID extension. The unique folder identifier. Get whether or not the folder is subscribed. Gets whether or not the folder is subscribed. if the folder is subscribed; otherwise, . Get whether or not the folder is currently open. Gets whether or not the folder is currently open. if the folder is currently open; otherwise, . Get whether or not the folder can be opened. Gets whether or not the folder can be opened. if the folder can be opened; otherwise, . Get whether or not the folder exists. Gets whether or not the folder exists. if the folder exists; otherwise, . Get the highest mod-sequence value of all messages in the mailbox. Gets the highest mod-sequence value of all messages in the mailbox. The highest mod-sequence value. Get the Unique ID validity. UIDs are only valid so long as the UID validity value remains unchanged. If and when the folder's is changed, a client MUST discard its cache of UIDs along with any summary information that it may have and re-query the folder. The will only be set after the folder has been opened. The UID validity. Get the UID that the next message that is added to the folder will be assigned. This value will only be set after the folder has been opened. The next UID. Get the maximum size of a message that can be appended to the folder. Gets the maximum size of a message that can be appended to the folder. If the value is not set, then the limit is unspecified. The append limit. Get the size of the folder. Gets the size of the folder in bytes. If the value is not set, then the size is unspecified. The size of the folder, in bytes. Get the index of the first unread message in the folder. Gets the index of the first unread message in the folder. This value will only be set after the folder has been opened. A value of -1 indicates that there are no unread messages in the folder or that the server has not provided the index of the first unread message. The index of the first unread message or -1 if there are no unread messages in the folder. Get the number of unread messages in the folder. Gets the number of unread messages in the folder. This value will only be set after calling with . The number of unread messages. Get the number of recently delivered messages in the folder. Gets the number of recently delivered messages in the folder. This value will only be set after calling with . The number of recently delivered messages. Get the total number of messages in the folder. Gets the total number of messages in the folder. The total number of messages. Get the threading algorithms supported by the folder. Gets the threading algorithms supported by the folder. The supported threading algorithms. Determine whether or not an supports a feature. Determines whether or not an supports a feature. The desired feature. if the feature is supported; otherwise, . Opens the folder using the requested folder access. This variant of the method is meant for quick resynchronization of the folder. Before calling this method, the method MUST be called. You should also make sure to add listeners to the and events to get notifications of changes since the last time the folder was opened. The state of the folder. The requested folder access. The last known value. The last known value. The last known list of unique message identifiers. The cancellation token. is not a valid value. The has been disposed. The is not connected. The is not authenticated. The does not exist. The quick resynchronization feature has not been enabled. The mail store does not support the quick resynchronization feature. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously opens the folder using the requested folder access. This variant of the method is meant for quick resynchronization of the folder. Before calling this method, the method MUST be called. You should also make sure to add listeners to the and events to get notifications of changes since the last time the folder was opened. The state of the folder. The requested folder access. The last known value. The last known value. The last known list of unique message identifiers. The cancellation token. is not a valid value. The has been disposed. The is not connected. The is not authenticated. The does not exist. The quick resynchronization feature has not been enabled. The mail store does not support the quick resynchronization feature. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Open the folder using the requested folder access. Opens the folder using the requested folder access. The state of the folder. The requested folder access. The cancellation token. is not a valid value. The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously open the folder using the requested folder access. Asynchronously opens the folder using the requested folder access. The state of the folder. The requested folder access. The cancellation token. is not a valid value. The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Close the folder, optionally expunging the messages marked for deletion. Closes the folder, optionally expunging the messages marked for deletion. If set to , expunge. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously close the folder, optionally expunging the messages marked for deletion. Asynchronously closes the folder, optionally expunging the messages marked for deletion. An asynchronous task context. If set to , expunge. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Create a new subfolder with the given name. Creates a new subfolder with the given name. The created folder. The name of the folder to create. if the folder will be used to contain messages; otherwise, . The cancellation token. is . is empty. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously create a new subfolder with the given name. Asynchronously creates a new subfolder with the given name. The created folder. The name of the folder to create. if the folder will be used to contain messages; otherwise, . The cancellation token. is . is empty. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Create a new subfolder with the given name. Creates a new subfolder with the given name. The created folder. The name of the folder to create. A list of special uses for the folder being created. The cancellation token. is . -or- is . is empty. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The does not support the creation of special folders. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously create a new subfolder with the given name. Asynchronously creates a new subfolder with the given name. The created folder. The name of the folder to create. A list of special uses for the folder being created. The cancellation token. is . -or- is . is empty. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The does not support the creation of special folders. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Create a new subfolder with the given name. Creates a new subfolder with the given name. The created folder. The name of the folder to create. The special use for the folder being created. The cancellation token. is . is empty. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The does not support the creation of special folders. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously create a new subfolder with the given name. Asynchronously creates a new subfolder with the given name. The created folder. The name of the folder to create. The special use for the folder being created. The cancellation token. is . is empty. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The does not support the creation of special folders. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Rename the folder. Renames the folder. The new parent folder. The new name of the folder. The cancellation token. is . -or- is . does not belong to the . -or- is not a legal folder name. The has been disposed. The is not connected. The is not authenticated. The folder cannot be renamed (it is either a namespace or the Inbox). The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously rename the folder. Asynchronously renames the folder. An asynchronous task context. The new parent folder. The new name of the folder. The cancellation token. is . -or- is . does not belong to the . -or- is not a legal folder name. The has been disposed. The is not connected. The is not authenticated. The folder cannot be renamed (it is either a namespace or the Inbox). The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Delete the folder. Deletes the folder. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder cannot be deleted (it is either a namespace or the Inbox). The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously delete the folder. Asynchronously deletes the folder. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder cannot be deleted (it is either a namespace or the Inbox). The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Subscribe to the folder. Subscribes to the folder. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously subscribe to the folder. Asynchronously subscribes to the folder. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder cannot be deleted (it is either a namespace or the Inbox). The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Unsubscribe from the folder. Unsubscribes from the folder. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously unsubscribe from the folder. Asynchronously unsubscribes from the folder. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the subfolders. Gets the subfolders as well as queries the server for the status of the requested items. When the argument is non-empty, this has the equivalent functionality of calling and then calling on each of the returned folders. Using this method is potentially more efficient than querying the status of each returned folder. The subfolders. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the subfolders. Asynchronously gets the subfolders as well as queries the server for the status of the requested items. When the argument is non-empty, this has the equivalent functionality of calling and then calling on each of the returned folders. The subfolders. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the subfolders. Gets the subfolders. The subfolders. If set to , only subscribed folders will be listed. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the subfolders. Asynchronously gets the subfolders. The subfolders. If set to , only subscribed folders will be listed. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified subfolder. Gets the specified subfolder. The subfolder. The name of the subfolder. The cancellation token. is . is either an empty string or contains the . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The requested folder could not be found. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified subfolder. Asynchronously gets the specified subfolder. The subfolder. The name of the subfolder. The cancellation token. is . is either an empty string or contains the . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The requested folder could not be found. The server's response contained unexpected tokens. The command failed. Force the server to flush its state for the folder. Forces the server to flush its state for the folder. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously force the server to flush its state for the folder. Asynchronously forces the server to flush its state for the folder. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Update the values of the specified items. Updates the values of the specified items. The method MUST NOT be used on a folder that is already in the opened state. Instead, other ways of getting the desired information should be used. For example, a common use for the method is to get the number of unread messages in the folder. When the folder is open, however, it is possible to use the method to query for the list of unread messages. The items to update. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The does not exist. The mail store does not support the STATUS command. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously update the values of the specified items. Updates the values of the specified items. The method MUST NOT be used on a folder that is already in the opened state. Instead, other ways of getting the desired information should be used. For example, a common use for the method is to get the number of unread messages in the folder. When the folder is open, however, it is possible to use the method to query for the list of unread messages. An asynchronous task context. The items to update. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The does not exist. The mail store does not support the STATUS command. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the complete access control list for the folder. Gets the complete access control list for the folder. The access control list. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the complete access control list for the folder. Asynchronously gets the complete access control list for the folder. The access control list. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the access rights for a particular identifier. Gets the access rights for a particular identifier. The access rights. The identifier name. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the access rights for a particular identifier. Asynchronously gets the access rights for a particular identifier. The access rights. The identifier name. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the access rights for the current authenticated user. Gets the access rights for the current authenticated user. The access rights. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the access rights for the current authenticated user. Asynchronously gets the access rights for the current authenticated user. The access rights. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add access rights for the specified identity. Adds the given access rights for the specified identity. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add access rights for the specified identity. Asynchronously adds the given access rights for the specified identity. An asynchronous task context. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove access rights for the specified identity. Removes the given access rights for the specified identity. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove access rights for the specified identity. Asynchronously removes the given access rights for the specified identity. An asynchronous task context. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the access rights for the specified identity. Sets the access rights for the specified identity. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the access rights for the specified identity. Asynchronously sets the access rights for the specified identity. An asynchronous task context. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove all access rights for the given identity. Removes all access rights for the given identity. The identity name. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove all access rights for the given identity. Asynchronously removes all access rights for the given identity. An asynchronous task context. The identity name. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the quota information for the folder. Gets the quota information for the folder. To determine if a quotas are supported, check the property. The folder quota. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support quotas. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the quota information for the folder. Asynchronously gets the quota information for the folder. To determine if a quotas are supported, check the property. The folder quota. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support quotas. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the quota limits for the folder. Sets the quota limits for the folder. To determine if a quotas are supported, check the property. The updated folder quota. If not , sets the maximum number of messages to allow. If not , sets the maximum storage size (in kilobytes). The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support quotas. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the quota limits for the folder. Asynchronously sets the quota limits for the folder. To determine if a quotas are supported, check the property. The updated folder quota. If not , sets the maximum number of messages to allow. If not , sets the maximum storage size (in kilobytes). The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support quotas. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Gets the specified metadata. Gets the specified metadata. The requested metadata value. The metadata tag. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously gets the specified metadata. Asynchronously gets the specified metadata. The requested metadata value. The metadata tag. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Gets the specified metadata. Gets the specified metadata. The requested metadata. The metadata tags. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously gets the specified metadata. Asynchronously gets the specified metadata. The requested metadata. The metadata tags. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Gets the specified metadata. Gets the specified metadata. The requested metadata. The metadata options. The metadata tags. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously gets the specified metadata. Asynchronously gets the specified metadata. The requested metadata. The metadata options. The metadata tags. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Sets the specified metadata. Sets the specified metadata. The metadata. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously sets the specified metadata. Asynchronously sets the specified metadata. An asynchronous task context. The metadata. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Expunge the folder, permanently removing all messages marked for deletion. Expunges the folder, permanently removing all messages marked for deletion. Normally, an event will be emitted for each message that is expunged. However, if the mail store supports the quick resynchronization feature and it has been enabled via the method, then the event will be emitted rather than the event. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously expunge the folder, permanently removing all messages marked for deletion. Asynchronously expunges the folder, permanently removing all messages marked for deletion. Normally, an event will be emitted for each message that is expunged. However, if the mail store supports the quick resynchronization feature and it has been enabled via the method, then the event will be emitted rather than the event. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Expunge the specified uids, permanently removing them from the folder. Expunges the specified uids, permanently removing them from the folder. Normally, an event will be emitted for each message that is expunged. However, if the mail store supports the quick resynchronization feature and it has been enabled via the method, then the event will be emitted rather than the event. The message uids. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously expunge the specified uids, permanently removing them from the folder. Asynchronously expunges the specified uids, permanently removing them from the folder. Normally, an event will be emitted for each message that is expunged. However, if the mail store supports the quick resynchronization feature and it has been enabled via the method, then the event will be emitted rather than the event. An asynchronous task context. The message uids. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append a message to the folder. Appends a message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The append request. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- The request included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append a message to the folder. Asynchronously appends a message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The append request. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- The request included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append a message to the folder. Appends a message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The formatting options. The append request. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- The request included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append a message to the folder. Asynchronously appends a message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The formatting options. The append request. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- The request included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append multiple messages to the folder. Appends multiple messages to the folder and returns the UniqueIds assigned to each of the messages. The UIDs of the appended messages, if available; otherwise, an empty array. The append requests. The cancellation token. is . One or more of the is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- One ore more requests included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append multiple messages to the folder. Asynchronously appends multiple messages to the folder and returns the UniqueIds assigned to each of the messages. The UID of the appended message, if available; otherwise, an empty array. The append requests. The cancellation token. is . One or more of the is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- One ore more requests included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append multiple messages to the folder. Appends multiple messages to the folder and returns the UniqueIds assigned to each of the messages. The UIDs of the appended messages, if available; otherwise, an empty array. The formatting options. The append requests. The cancellation token. is . -or- is . One or more of the is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- One ore more requests included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append multiple messages to the folder. Asynchronously appends multiple messages to the folder and returns the UniqueIds assigned to each of the messages. The UID of the appended message, if available; otherwise, an empty array. The formatting options. The append requests. The cancellation token. is . -or- is . One or more of the is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- One ore more requests included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Replace a message in the folder. Replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The UID of the message to be replaced. The replace request. The cancellation token. is . is invalid. -or- The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the appended message, if available; otherwise, . The UID of the message to be replaced. The replace request. The cancellation token. is . is invalid. -or- The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The formatting options. The UID of the message to be replaced. The replace request. The cancellation token. is . -or- is . is invalid. -or- The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The formatting options. The UID of the message to be replaced. The replace request. The cancellation token. is . -or- is . is invalid. -or- The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The index of the message to be replaced. The replace request. The cancellation token. is . is out of range. The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the appended message, if available; otherwise, . The index of the message to be replaced. The replace request. The cancellation token. is . is out of range. The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The formatting options. The index of the message to be replaced. The replace request. The cancellation token. is . -or- is . is out of range. The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The formatting options. The index of the message to be replaced. The replace request. The cancellation token. is . -or- is . is out of range. The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Copy the specified message to the destination folder. Copies the specified message to the destination folder. The UID of the message in the destination folder, if available; otherwise, . The UID of the message to copy. The destination folder. The cancellation token. is . is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously copy the specified message to the destination folder. Asynchronously copies the specified message to the destination folder. The UID of the message in the destination folder, if available; otherwise, . The UID of the message to copy. The destination folder. The cancellation token. is . is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Copy the specified messages to the destination folder. Copies the specified messages to the destination folder. The UID mapping of the messages in the destination folder, if available; otherwise an empty mapping. The UIDs of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously copy the specified messages to the destination folder. Asynchronously copies the specified messages to the destination folder. The UID mapping of the messages in the destination folder, if available; otherwise an empty mapping. The UIDs of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Move the specified message to the destination folder. Moves the specified message to the destination folder. The UID of the message in the destination folder, if available; otherwise, . The UID of the message to move. The destination folder. The cancellation token. is . is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously move the specified message to the destination folder. Asynchronously moves the specified message to the destination folder. The UID of the message in the destination folder, if available; otherwise, . The UID of the message to move. The destination folder. The cancellation token. is . is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Move the specified messages to the destination folder. Moves the specified messages to the destination folder. The UID mapping of the messages in the destination folder, if available; otherwise an empty mapping. The UIDs of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously move the specified messages to the destination folder. Asynchronously moves the specified messages to the destination folder. The UID mapping of the messages in the destination folder, if available; otherwise an empty mapping. The UIDs of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Copy the specified message to the destination folder. Copies the specified message to the destination folder. The index of the message to copy. The destination folder. The cancellation token. is . does not refer to a valid message index. The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously copy the specified message to the destination folder. Asynchronously copies the specified message to the destination folder. An asynchronous task context. The indexes of the message to copy. The destination folder. The cancellation token. is . does not refer to a valid message index. The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Copy the specified messages to the destination folder. Copies the specified messages to the destination folder. The indexes of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously copy the specified messages to the destination folder. Asynchronously copies the specified messages to the destination folder. An asynchronous task context. The indexes of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Move the specified message to the destination folder. Moves the specified message to the destination folder. The index of the message to move. The destination folder. The cancellation token. is . does not refer to a valid message index. The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously move the specified message to the destination folder. Asynchronously moves the specified message to the destination folder. An asynchronous task context. The index of the message to move. The destination folder. The cancellation token. is . does not refer to a valid message index. The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Move the specified messages to the destination folder. Moves the specified messages to the destination folder. The indexes of the messages to move. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously move the specified messages to the destination folder. Asynchronously moves the specified messages to the destination folder. An asynchronous task context. The indexes of the messages to move. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message UIDs. Fetches the message summaries for the specified message UIDs. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The UIDs. The fetch request. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message UIDs. Asynchronously fetches the message summaries for the specified message UIDs. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The UIDs. The fetch request. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message indexes. Fetches the message summaries for the specified message indexes. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The indexes. The fetch request. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message indexes. Asynchronously fetches the message summaries for the specified message indexes. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The indexes. The fetch request. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the messages between the two indexes, inclusive. Fetches the message summaries for the messages between the two indexes, inclusive. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The minimum index. The maximum index, or -1 to specify no upper bound. The fetch request. The cancellation token. is . is out of range. -or- is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the messages between the two indexes, inclusive. Asynchronously fetches the message summaries for the messages between the two indexes, inclusive. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The minimum index. The maximum index, or -1 to specify no upper bound. The fetch request. The cancellation token. is . is out of range. -or- is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified message headers. Gets the specified message headers. The message headers. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified message headers. Asynchronously gets the specified message headers. The message headers. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified body part headers. Gets the specified body part headers. The body part headers. The UID of the message. The body part. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified body part headers. Asynchronously gets the specified body part headers. The body part headers. The UID of the message. The body part. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified message headers. Gets the specified message headers. The message headers. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified message headers. Asynchronously gets the specified message headers. The message headers. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified body part headers. Gets the specified body part headers. The body part headers. The index of the message. The body part. The cancellation token. The progress reporting mechanism. is out of range. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified body part headers. Asynchronously gets the specified body part headers. The body part headers. The index of the message. The body part. The cancellation token. The progress reporting mechanism. is out of range. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified message. Gets the specified message. The message. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified message. Asynchronously gets the specified message. The message. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified message. Gets the specified message. The message. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified message. Asynchronously gets the specified message. The message. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified body part. Gets the specified body part. The body part. The UID of the message. The body part. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified body part. Asynchronously gets the specified body part. The body part. The UID of the message. The body part. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified body part. Gets the specified body part. The body part. The index of the message. The body part. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified body part. Asynchronously gets the specified body part. The body part. The index of the message. The body part. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a message stream. Gets a message stream. The message stream. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a message stream. Asynchronously gets a message stream. The message stream. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a message stream. Gets a message stream. The message stream. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a message stream. Asynchronously gets a message stream. The message stream. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified message. Gets a substream of the message. If the starting offset is beyond the end of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the message, a truncated stream will be returned. The stream. The UID of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified message. Asynchronously gets a substream of the message. If the starting offset is beyond the end of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the message, a truncated stream will be returned. The stream. The UID of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified message. Gets a substream of the message. If the starting offset is beyond the end of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the message, a truncated stream will be returned. The stream. The index of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified message. Asynchronously gets a substream of the message. If the starting offset is beyond the end of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the message, a truncated stream will be returned. The stream. The index of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a body part as a stream. Gets a body part as a stream. The body part stream. The UID of the message. The desired body part. The cancellation token. The progress reporting mechanism. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a body part as a stream. Asynchronously gets a body part as a stream. The body part stream. The UID of the message. The desired body part. The cancellation token. The progress reporting mechanism. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a body part as a stream. Gets a body part as a stream. The body part stream. The index of the message. The desired body part. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a body part as a stream. Asynchronously gets a body part as a stream. The body part stream. The index of the message. The desired body part. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified body part. Gets a substream of the body part. If the starting offset is beyond the end of the body part, an empty stream is returned. If the number of bytes desired extends beyond the end of the body part, a truncated stream will be returned. The stream. The UID of the message. The desired body part. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is . is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified body part. Asynchronously gets a substream of the body part. If the starting offset is beyond the end of the body part, an empty stream is returned. If the number of bytes desired extends beyond the end of the body part, a truncated stream will be returned. The stream. The UID of the message. The desired body part. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is . is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified body part. Gets a substream of the body part. If the starting offset is beyond the end of the body part, an empty stream is returned. If the number of bytes desired extends beyond the end of the body part, a truncated stream will be returned. The stream. The index of the message. The desired body part. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is . is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified body part. Asynchronously gets a substream of the body part. If the starting offset is beyond the end of the body part, an empty stream is returned. If the number of bytes desired extends beyond the end of the body part, a truncated stream will be returned. The stream. The index of the message. The desired body part. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is . is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified message. Gets a substream of the specified message. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The UID of the message. The desired section of the message. The cancellation token. The progress reporting mechanism. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified message. Asynchronously gets a substream of the specified message. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The UID of the message. The desired section of the message. The cancellation token. The progress reporting mechanism. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified message. Gets a substream of the specified message. If the starting offset is beyond the end of the specified section of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the section, a truncated stream will be returned. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The UID of the message. The desired section of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is . is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified message. Asynchronously gets a substream of the specified message. If the starting offset is beyond the end of the specified section of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the section, a truncated stream will be returned. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The UID of the message. The desired section of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is . is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified message. Gets a substream of the specified message. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The index of the message. The desired section of the message. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified message. Asynchronously gets a substream of the specified message. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The index of the message. The desired section of the message. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified message. Gets a substream of the specified message. If the starting offset is beyond the end of the specified section of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the section, a truncated stream will be returned. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The index of the message. The desired section of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is . is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified message. Asynchronously gets a substream of the specified message. If the starting offset is beyond the end of the specified section of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the section, a truncated stream will be returned. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The index of the message. The desired section of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is . is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store message flags and keywords for a message. Updates the message flags and keywords for a message. if the store operation was successful; otherwise, . The UID of the message. The message flags and keywords to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store message flags and keywords for a message. Asynchronously updates the message flags and keywords for a message. if the store operation was successful; otherwise, . The UID of the message. The message flags and keywords to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store message flags and keywords for a set of messages. Updates the message flags and keywords for a set of messages. The UIDs of the messages that were not updated. The message UIDs. The message flags and keywords to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store message flags and keywords for a set of messages. Asynchronously updates the message flags and keywords for a set of messages. The UIDs of the messages that were not updated. The message UIDs. The message flags and keywords to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store message flags and keywords for a message. Updates the message flags and keywords for a message. if the store operation was successful; otherwise, . The index of the message. The message flags and keywords to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store message flags and keywords for a message. Asynchronously updates the message flags and keywords for a message. if the store operation was successful; otherwise, . The index of the message. The message flags and keywords to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store message flags and keywords for a set of messages. Updates the message flags and keywords for a set of messages. The indexes of the messages that were not updated. The message indexes. The message flags and keywords to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store message flags and keywords for a set of messages. Asynchronously updates the message flags and keywords for a set of message. The indexes of the messages that were not updated. The message indexes. The message flags and keywords to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store GMail-style labels for a message. Updates the GMail-style labels for a message. if the store operation was successful; otherwise, . The UID of the message. The labels to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store GMail-style labels for a message. Asynchronously updates the GMail-style labels for a message. if the store operation was successful; otherwise, . The UID of the message. The labels to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store GMail-style labels for a set of messages. Updates the GMail-style labels for a set of messages. The UIDs of the messages that were not updated. The message UIDs. The labels to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store GMail-style labels for a set of messages. Asynchronously updates the GMail-style labels for a set of messages. The UIDs of the messages that were not updated. The message UIDs. The labels to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store GMail-style labels for a message. Updates the GMail-style labels for a message. if the store operation was successful; otherwise, . The index of the message. The labels to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store GMail-style labels for a message. Asynchronously updates the GMail-style labels for a message. if the store operation was successful; otherwise, . The index of the message. The labels to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store GMail-style labels for a set of messages. Updates the GMail-style labels for a set of messages. The indexes of the messages that were not updated. The message indexes. The labels to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store GMail-style labels for a set of messages. Asynchronously updates the GMail-style labels for a set of message. The indexes of the messages that were not updated. The message indexes. The labels to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store the annotations for the specified message. Stores the annotations for the specified message. The UID of the message. The annotations to store. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store the annotations for the specified message. Asynchronously stores the annotations for the specified message. An asynchronous task context. The UID of the message. The annotations to store. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store the annotations for the specified messages. Stores the annotations for the specified messages. The UIDs of the messages. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store the annotations for the specified messages. Asynchronously stores the annotations for the specified messages. An asynchronous task context. The UIDs of the messages. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store the annotations for the specified messages only if their mod-sequence value is less than the specified value. Stores the annotations for the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The UIDs of the messages. The mod-sequence value. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. -or- The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store the annotations for the specified messages only if their mod-sequence value is less than the specified value. Asynchronously stores the annotations for the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The UIDs of the messages. The mod-sequence value. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. -or- The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store the annotations for the specified message. Stores the annotations for the specified message. The index of the message. The annotations to store. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store the annotations for the specified message. Asynchronously stores the annotations for the specified message. An asynchronous task context. The indexes of the message. The annotations to store. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store the annotations for the specified messages. Stores the annotations for the specified messages. The indexes of the messages. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store the annotations for the specified messages. Asynchronously stores the annotations for the specified messages. An asynchronous task context. The indexes of the messages. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store the annotations for the specified messages only if their mod-sequence value is less than the specified value. Stores the annotations for the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The indexes of the messages. The mod-sequence value. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. -or- The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store the annotations for the specified messages only if their mod-sequence value is less than the specified value. Asynchronously stores the annotations for the specified messages only if their mod-sequence value is less than the specified value.s The indexes of the messages that were not updated. The indexes of the messages. The mod-sequence value. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. -or- The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Search the folder for messages matching the specified query. The returned array of unique identifiers can be used with methods such as . An array of matching UIDs. The search query. The cancellation token. is . One or more search terms in the are not supported by the mail store. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously search the folder for messages matching the specified query. The returned array of unique identifiers can be used with methods such as . An array of matching UIDs. The search query. The cancellation token. is . One or more search terms in the are not supported by the mail store. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Search the subset of UIDs in the folder for messages matching the specified query. The returned array of unique identifiers can be used with methods such as . An array of matching UIDs. The subset of UIDs The search query. The cancellation token. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported by the mail store. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously search the subset of UIDs in the folder for messages matching the specified query. The returned array of unique identifiers can be used with methods such as . An array of matching UIDs. The subset of UIDs The search query. The cancellation token. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported by the mail store. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Search the folder for messages matching the specified query. Searches the folder for messages matching the specified query, returning only the specified search results. The search results. The search options. The search query. The cancellation token. is . One or more search terms in the are not supported. -or- The server does not support the specified search options. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously search the folder for messages matching the specified query. Asynchronously searches the folder for messages matching the specified query, returning only the specified search results. The search results. The search options. The search query. The cancellation token. is . One or more search terms in the are not supported. -or- The server does not support the specified search options. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Search the subset of UIDs in the folder for messages matching the specified query. Searches the subset of UIDs in the folder for messages matching the specified query, returning only the specified search results. The search results. The search options. The subset of UIDs The search query. The cancellation token. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported. -or- The server does not support the specified search options. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously search the subset of UIDs in the folder for messages matching the specified query. Asynchronously searches the subset of UIDs in the folder for messages matching the specified query, returning only the specified search results. The search results. The search options. The subset of UIDs The search query. The cancellation token. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported. -or- The server does not support the specified search options. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Sort messages matching the specified query. The returned array of unique identifiers will be sorted in the preferred order and can be used with . An array of matching UIDs in the specified sort order. The search query. The sort order. The cancellation token. is . -or- is . is empty. One or more search terms in the are not supported. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously sort messages matching the specified query. The returned array of unique identifiers will be sorted in the preferred order and can be used with . An array of matching UIDs in the specified sort order. The search query. The sort order. The cancellation token. is . -or- is . is empty. One or more search terms in the are not supported. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Sort messages matching the specified query. The returned array of unique identifiers will be sorted in the preferred order and can be used with . An array of matching UIDs in the specified sort order. The subset of UIDs The search query. The sort order. The cancellation token. is . -or- is . -or- is . is empty. -or- One or more of the is invalid. -or- is empty. One or more search terms in the are not supported. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously sort messages matching the specified query. The returned array of unique identifiers will be sorted in the preferred order and can be used with . An array of matching UIDs in the specified sort order. The subset of UIDs The search query. The sort order. The cancellation token. is . -or- is . -or- is . is empty. -or- One or more of the is invalid. -or- is empty. One or more search terms in the are not supported. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Sort messages matching the specified query. Searches the folder for messages matching the specified query, returning the search results in the specified sort order. The search results. The search options. The search query. The sort order. The cancellation token. is . -or- is . is empty. One or more search terms in the are not supported. -or- The server does not support the specified search options. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously sort messages matching the specified query. Asynchronously searches the folder for messages matching the specified query, returning the search results in the specified sort order. The search results. The search options. The search query. The sort order. The cancellation token. is . -or- is . is empty. One or more search terms in the are not supported. -or- The server does not support the specified search options. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Sort messages matching the specified query. Searches the folder for messages matching the specified query, returning the search results in the specified sort order. The search results. The search options. The subset of UIDs The search query. The sort order. The cancellation token. is . -or- is . -or- is . is empty. -or- One or more of the is invalid. -or- is empty. One or more search terms in the are not supported. -or- The server does not support the specified search options. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously sort messages matching the specified query. Asynchronously searches the folder for messages matching the specified query, returning the search results in the specified sort order. The search results. The search options. The subset of UIDs The search query. The sort order. The cancellation token. is . -or- is . -or- is . is empty. -or- One or more of the is invalid. -or- is empty. One or more search terms in the are not supported. -or- The server does not support the specified search options. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Thread the messages in the folder that match the search query using the specified threading algorithm. The can be used with methods such as . An array of message threads. The threading algorithm to use. The search query. The cancellation token. is not supported. is . One or more search terms in the are not supported. -or- The server does not support threading search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously thread the messages in the folder that match the search query using the specified threading algorithm. The can be used with methods such as . An array of message threads. The threading algorithm to use. The search query. The cancellation token. is not supported. is . One or more search terms in the are not supported. -or- The server does not support threading search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Thread the messages in the folder that match the search query using the specified threading algorithm. The can be used with methods such as . An array of message threads. The subset of UIDs The threading algorithm to use. The search query. The cancellation token. is not supported. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported. -or- The server does not support threading search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously thread the messages in the folder that match the search query using the specified threading algorithm. The can be used with methods such as . An array of message threads. The subset of UIDs The threading algorithm to use. The search query. The cancellation token. is not supported. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported. -or- The server does not support threading search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Occurs when the folder is opened. Emitted when the folder is opened. Occurs when the folder is closed. Emitted when the folder is closed. Occurs when the folder is deleted. Emitted when the folder is deleted. Occurs when the folder is renamed. Emitted when the folder is renamed. Occurs when the folder is subscribed. Emitted when the folder is subscribed. Occurs when the folder is unsubscribed. Emitted when the folder is unsubscribed. Occurs when a message is expunged from the folder. Emitted when a message is expunged from the folder. Occurs when messages vanish from the folder. Emitted when a messages vanish from the folder. Occurs when flags changed on a message. Emitted when flags changed on a message. Occurs when labels changed on a message. Emitted when labels changed on a message. Occurs when annotations changed on a message. Emitted when annotations changed on a message. Occurs when a message summary is fetched from the folder. Emitted when a message summary is fetched from the folder. When multiple message summaries are being fetched from a remote folder, it is possible that the connection will drop or some other exception will occur, causing the Fetch method to fail, requiring the client to request the same set of message summaries again after it reconnects. This is obviously inefficient. To alleviate this potential problem, this event will be emitted as soon as the successfully retrieves the complete for each requested message. The Fetch methods will return a list of all message summaries that any information was retrieved for, regardless of whether or not all of the requested items were fetched, therefore there may be a discrepancy between the number of times this event is emitted and the number of summary items returned from the Fetch method. Occurs when metadata changes. The event is emitted when metadata changes. Occurs when the mod-sequence changed on a message. Emitted when the mod-sequence changed on a message. Occurs when the highest mod-sequence changes. The event is emitted whenever the value changes. Occurs when the next UID changes. Emitted when the property changes. Occurs when the UID validity changes. Emitted when the property changes. Occurs when the ID changes. Emitted when the property changes. Occurs when the size of the folder changes. Emitted when the property changes. Occurs when the message count changes. Emitted when the property changes. Occurs when the recent message count changes. Emitted when the property changes. Occurs when the message unread count changes. Emitted when the property changes. Extension methods for that provide backwards API compatibility. Extension methods for that provide backwards API compatibility. Append the specified message to the folder. Appends the specified message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The folder. The message. The message flags. The cancellation token. The progress reporting mechanism. is . The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append the specified message to the folder. Asynchronously appends the specified message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The folder. The message. The message flags. The cancellation token. The progress reporting mechanism. is . The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append the specified message to the folder. Appends the specified message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The folder. The message. The message flags. The received date of the message. The cancellation token. The progress reporting mechanism. is . The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append the specified message to the folder. Asynchronously appends the specified message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The folder. The message. The message flags. The received date of the message. The cancellation token. The progress reporting mechanism. is . The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append the specified message to the folder. Appends the specified message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The folder. The message. The message flags. The received date of the message. The message annotations. The cancellation token. The progress reporting mechanism. is . The has been disposed. The is not connected. The is not authenticated. The does not exist. One or more does not define any properties. " The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append the specified message to the folder. Asynchronously appends the specified message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The folder. The message. The message flags. The received date of the message. The message annotations. The cancellation token. The progress reporting mechanism. is . The has been disposed. The is not connected. The is not authenticated. The does not exist. One or more does not define any properties. " The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append the specified message to the folder. Appends the specified message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The folder. The formatting options. The message. The message flags. The cancellation token. The progress reporting mechanism. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The does not exist. Internationalized formatting was requested but has not been enabled. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append the specified message to the folder. Asynchronously appends the specified message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The folder. The formatting options. The message. The message flags. The cancellation token. The progress reporting mechanism. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The does not exist. Internationalized formatting was requested but has not been enabled. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append the specified message to the folder. Appends the specified message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The folder. The formatting options. The message. The message flags. The received date of the message. The cancellation token. The progress reporting mechanism. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The does not exist. Internationalized formatting was requested but has not been enabled. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append the specified message to the folder. Asynchronously appends the specified message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The folder. The formatting options. The message. The message flags. The received date of the message. The cancellation token. The progress reporting mechanism. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The does not exist. Internationalized formatting was requested but has not been enabled. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append the specified message to the folder. Appends the specified message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The folder. The formatting options. The message. The message flags. The received date of the message. The message annotations. The cancellation token. The progress reporting mechanism. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The does not exist. Internationalized formatting was requested but has not been enabled. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append the specified message to the folder. Asynchronously appends the specified message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The folder. The formatting options. The message. The message flags. The received date of the message. The message annotations. The cancellation token. The progress reporting mechanism. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The does not exist. Internationalized formatting was requested but has not been enabled. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append the specified messages to the folder. Appends the specified messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The folder. The array of messages to append to the folder. The message flags to use for each message. The cancellation token. The progress reporting mechanism. is . -or- is . One or more of the is null. -or- The number of messages does not match the number of flags. The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append the specified messages to the folder. Asynchronously appends the specified messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The folder. The array of messages to append to the folder. The message flags to use for each message. The cancellation token. The progress reporting mechanism. is . -or- is . One or more of the is null. -or- The number of messages does not match the number of flags. The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append the specified messages to the folder. Appends the specified messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The folder. The array of messages to append to the folder. The message flags to use for each of the messages. The received dates to use for each of the messages. The cancellation token. The progress reporting mechanism. is . -or- is . -or- is . One or more of the is null. -or- The number of messages, flags, and dates do not match. The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append the specified messages to the folder. Asynchronously appends the specified messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The folder. The array of messages to append to the folder. The message flags to use for each of the messages. The received dates to use for each of the messages. The cancellation token. The progress reporting mechanism. is . -or- is . -or- is . One or more of the is null. -or- The number of messages, flags, and dates do not match. The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append the specified messages to the folder. Appends the specified messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The folder. The formatting options. The array of messages to append to the folder. The message flags to use for each message. The cancellation token. The progress reporting mechanism. is . -or- is . -or- is . One or more of the is null. -or- The number of messages does not match the number of flags. The has been disposed. The is not connected. The is not authenticated. The does not exist. Internationalized formatting was requested but has not been enabled. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append the specified messages to the folder. Asynchronously appends the specified messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The folder. The formatting options. The array of messages to append to the folder. The message flags to use for each message. The cancellation token. The progress reporting mechanism. is . -or- is . -or- is . One or more of the is null. -or- The number of messages does not match the number of flags. The has been disposed. The is not connected. The is not authenticated. The does not exist. Internationalized formatting was requested but has not been enabled. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append the specified messages to the folder. Appends the specified messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The folder. The formatting options. The array of messages to append to the folder. The message flags to use for each of the messages. The received dates to use for each of the messages. The cancellation token. The progress reporting mechanism. is . -or- is . -or- is . -or- is . One or more of the is null. -or- The number of messages, flags, and dates do not match. The has been disposed. The is not connected. The is not authenticated. The does not exist. Internationalized formatting was requested but has not been enabled. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append the specified messages to the folder. Asynchronously appends the specified messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The folder. The formatting options. The array of messages to append to the folder. The message flags to use for each of the messages. The received dates to use for each of the messages. The cancellation token. The progress reporting mechanism. is . -or- is . -or- is . -or- is . One or more of the is null. -or- The number of messages, flags, and dates do not match. The has been disposed. The is not connected. The is not authenticated. The does not exist. Internationalized formatting was requested but has not been enabled. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Replace a message in the folder. Replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The UID of the message to be replaced. The message. The message flags. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The UID of the message to be replaced. The message. The message flags. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The UID of the message to be replaced. The message. The message flags. The received date of the message. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The UID of the message to be replaced. The message. The message flags. The received date of the message. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The formatting options. The UID of the message to be replaced. The message. The message flags. The cancellation token. The progress reporting mechanism. is . -or- is . is invalid. The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The formatting options. The UID of the message to be replaced. The message. The message flags. The cancellation token. The progress reporting mechanism. is . -or- is . is invalid. The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The formatting options. The UID of the message to be replaced. The message. The message flags. The received date of the message. The cancellation token. The progress reporting mechanism. is . -or- is . is invalid. The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The formatting options. The UID of the message to be replaced. The message. The message flags. The received date of the message. The cancellation token. The progress reporting mechanism. is . -or- is . is invalid. The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The index of the message to be replaced. The message. The message flags. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The index of the message to be replaced. The message. The message flags. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The index of the message to be replaced. The message. The message flags. The received date of the message. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The index of the message to be replaced. The message. The message flags. The received date of the message. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The formatting options. The index of the message to be replaced. The message. The message flags. The cancellation token. The progress reporting mechanism. is . -or- is . is out of range. The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The formatting options. The index of the message to be replaced. The message. The message flags. The cancellation token. The progress reporting mechanism. is . -or- is . is out of range. The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The formatting options. The index of the message to be replaced. The message. The message flags. The received date of the message. The cancellation token. The progress reporting mechanism. is . -or- is . is out of range. The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Replaces the specified message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The folder. The formatting options. The index of the message to be replaced. The message. The message flags. The received date of the message. The cancellation token. The progress reporting mechanism. is . -or- is . is out of range. The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Fetch the message summaries for the specified message UIDs. Fetches the message summaries for the specified message UIDs. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The UIDs. The message summary items to fetch. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message UIDs. Asynchronously fetches the message summaries for the specified message UIDs. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The UIDs. The message summary items to fetch. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message UIDs. Fetches the message summaries for the specified message UIDs. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The UIDs. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message UIDs. Asynchronously fetches the message summaries for the specified message UIDs. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The UIDs. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message UIDs. Fetches the message summaries for the specified message UIDs. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The UIDs. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message UIDs. Asynchronously fetches the message summaries for the specified message UIDs. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The UIDs. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message UIDs that have a higher mod-sequence value than the one specified. Fetches the message summaries for the specified message UIDs that have a higher mod-sequence value than the one specified. If the mail store supports quick resynchronization and the application has enabled this feature via , then this method will emit events for messages that have vanished since the specified mod-sequence value. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The UIDs. The mod-sequence value. The message summary items to fetch. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message UIDs that have a higher mod-sequence value than the one specified. Asynchronously fetches the message summaries for the specified message UIDs that have a higher mod-sequence value than the one specified. If the mail store supports quick resynchronization and the application has enabled this feature via , then this method will emit events for messages that have vanished since the specified mod-sequence value. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The UIDs. The mod-sequence value. The message summary items to fetch. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message UIDs that have a higher mod-sequence value than the one specified. Fetches the message summaries for the specified message UIDs that have a higher mod-sequence value than the one specified. If the mail store supports quick resynchronization and the application has enabled this feature via , then this method will emit events for messages that have vanished since the specified mod-sequence value. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The UIDs. The mod-sequence value. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message UIDs that have a higher mod-sequence value than the one specified. Asynchronously fetches the message summaries for the specified message UIDs that have a higher mod-sequence value than the one specified. If the mail store supports quick resynchronization and the application has enabled this feature via , then this method will emit events for messages that have vanished since the specified mod-sequence value. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The UIDs. The mod-sequence value. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message UIDs that have a higher mod-sequence value than the one specified. Fetches the message summaries for the specified message UIDs that have a higher mod-sequence value than the one specified. If the mail store supports quick resynchronization and the application has enabled this feature via , then this method will emit events for messages that have vanished since the specified mod-sequence value. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The UIDs. The mod-sequence value. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message UIDs that have a higher mod-sequence value than the one specified. Asynchronously fetches the message summaries for the specified message UIDs that have a higher mod-sequence value than the one specified. If the mail store supports quick resynchronization and the application has enabled this feature via , then this method will emit events for messages that have vanished since the specified mod-sequence value. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The UIDs. The mod-sequence value. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message indexes. Fetches the message summaries for the specified message indexes. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The indexes. The message summary items to fetch. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message indexes. Asynchronously fetches the message summaries for the specified message indexes. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The indexes. The message summary items to fetch. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message indexes. Fetches the message summaries for the specified message indexes. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The indexes. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message indexes. Asynchronously fetches the message summaries for the specified message indexes. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The indexes. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message indexes. Fetches the message summaries for the specified message indexes. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The indexes. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message indexes. Asynchronously fetches the message summaries for the specified message indexes. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The indexes. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message indexes that have a higher mod-sequence value than the one specified. Fetches the message summaries for the specified message indexes that have a higher mod-sequence value than the one specified. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The indexes. The mod-sequence value. The message summary items to fetch. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message indexes that have a higher mod-sequence value than the one specified. Asynchronously fetches the message summaries for the specified message indexes that have a higher mod-sequence value than the one specified. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The indexes. The mod-sequence value. The message summary items to fetch. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message indexes that have a higher mod-sequence value than the one specified. Fetches the message summaries for the specified message indexes that have a higher mod-sequence value than the one specified. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The indexes. The mod-sequence value. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message indexes that have a higher mod-sequence value than the one specified. Asynchronously fetches the message summaries for the specified message indexes that have a higher mod-sequence value than the one specified. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The indexes. The mod-sequence value. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message indexes that have a higher mod-sequence value than the one specified. Fetches the message summaries for the specified message indexes that have a higher mod-sequence value than the one specified. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The indexes. The mod-sequence value. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message indexes that have a higher mod-sequence value than the one specified. Asynchronously fetches the message summaries for the specified message indexes that have a higher mod-sequence value than the one specified. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The indexes. The mod-sequence value. The message summary items to fetch. The desired header fields. The cancellation token. is . -or- is . One or more of the is invalid. -or- One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the messages between the two indexes, inclusive. Fetches the message summaries for the messages between the two indexes, inclusive. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The minimum index. The maximum index, or -1 to specify no upper bound. The message summary items to fetch. The cancellation token. is out of range. -or- is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the messages between the two indexes, inclusive. Asynchronously fetches the message summaries for the messages between the two indexes, inclusive. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The minimum index. The maximum index, or -1 to specify no upper bound. The message summary items to fetch. The cancellation token. is out of range. -or- is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the messages between the two indexes, inclusive. Fetches the message summaries for the messages between the two indexes, inclusive. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The minimum index. The maximum index, or -1 to specify no upper bound. The message summary items to fetch. The desired header fields. The cancellation token. is out of range. -or- is out of range. is . One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the messages between the two indexes, inclusive. Asynchronously fetches the message summaries for the messages between the two indexes, inclusive. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The minimum index. The maximum index, or -1 to specify no upper bound. The message summary items to fetch. The desired header fields. The cancellation token. is out of range. -or- is out of range. is . One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the messages between the two indexes, inclusive. Fetches the message summaries for the messages between the two indexes, inclusive. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The minimum index. The maximum index, or -1 to specify no upper bound. The message summary items to fetch. The desired header fields. The cancellation token. is out of range. -or- is out of range. is . One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the messages between the two indexes, inclusive. Asynchronously fetches the message summaries for the messages between the two indexes, inclusive. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The minimum index. The maximum index, or -1 to specify no upper bound. The message summary items to fetch. The desired header fields. The cancellation token. is out of range. -or- is out of range. is . One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the messages between the two indexes (inclusive) that have a higher mod-sequence value than the one specified. Fetches the message summaries for the messages between the two indexes (inclusive) that have a higher mod-sequence value than the one specified. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The minimum index. The maximum index, or -1 to specify no upper bound. The mod-sequence value. The message summary items to fetch. The cancellation token. is out of range. -or- is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the messages between the two indexes (inclusive) that have a higher mod-sequence value than the one specified. Asynchronously fetches the message summaries for the messages between the two indexes (inclusive) that have a higher mod-sequence value than the one specified. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The minimum index. The maximum index, or -1 to specify no upper bound. The mod-sequence value. The message summary items to fetch. The cancellation token. is out of range. -or- is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the messages between the two indexes (inclusive) that have a higher mod-sequence value than the one specified. Fetches the message summaries for the messages between the two indexes (inclusive) that have a higher mod-sequence value than the one specified. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The minimum index. The maximum index, or -1 to specify no upper bound. The mod-sequence value. The message summary items to fetch. The desired header fields. The cancellation token. is out of range. -or- is out of range. is . One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the messages between the two indexes (inclusive) that have a higher mod-sequence value than the one specified. Asynchronously fetches the message summaries for the messages between the two indexes (inclusive) that have a higher mod-sequence value than the one specified. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The minimum index. The maximum index, or -1 to specify no upper bound. The mod-sequence value. The message summary items to fetch. The desired header fields. The cancellation token. is out of range. -or- is out of range. is . One or more of the specified is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the messages between the two indexes (inclusive) that have a higher mod-sequence value than the one specified. Fetches the message summaries for the messages between the two indexes (inclusive) that have a higher mod-sequence value than the one specified. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The minimum index. The maximum index, or -1 to specify no upper bound. The mod-sequence value. The message summary items to fetch. The desired header fields. The cancellation token. is out of range. -or- is out of range. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the messages between the two indexes (inclusive) that have a higher mod-sequence value than the one specified. Asynchronously fetches the message summaries for the messages between the two indexes (inclusive) that have a higher mod-sequence value than the one specified. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The folder. The minimum index. The maximum index, or -1 to specify no upper bound. The mod-sequence value. The message summary items to fetch. The desired header fields. The cancellation token. is out of range. -or- is out of range. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of flags to the specified message. Adds a set of flags to the specified message. The folder. The UID of the message. The message flags to add. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of flags to the specified message. Asynchronously adds a set of flags to the specified message. An asynchronous task context. The folder. The UID of the message. The message flags to add. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of flags to the specified message. Adds a set of flags to the specified message. The folder. The UID of the message. The message flags to add. A set of user-defined flags to add. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of flags to the specified message. Asynchronously adds a set of flags to the specified message. An asynchronous task context. The folder. The UID of the message. The message flags to add. A set of user-defined flags to add. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of flags to the specified messages. Adds a set of flags to the specified messages. The folder. The UIDs of the messages. The message flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of flags to the specified messages. Asynchronously adds a set of flags to the specified messages. An asynchronous task context. The folder. The UIDs of the messages. The message flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of flags to the specified messages. Adds a set of flags to the specified messages. The folder. The UIDs of the messages. The message flags to add. A set of user-defined flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of flags to the specified messages. Asynchronously adds a set of flags to the specified messages. An asynchronous task context. The folder. The UIDs of the messages. The message flags to add. A set of user-defined flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of flags from the specified message. Removes a set of flags from the specified message. The folder. The UIDs of the message. The message flags to remove. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of flags from the specified message. Asynchronously removes a set of flags from the specified message. An asynchronous task context. The folder. The UID of the message. The message flags to remove. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of flags from the specified message. Removes a set of flags from the specified message. The folder. The UIDs of the message. The message flags to remove. A set of user-defined flags to remove. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of flags from the specified message. Asynchronously removes a set of flags from the specified message. An asynchronous task context. The folder. The UID of the message. The message flags to remove. A set of user-defined flags to remove. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of flags from the specified messages. Removes a set of flags from the specified messages. The folder. The UIDs of the messages. The message flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of flags from the specified messages. Asynchronously removes a set of flags from the specified messages. An asynchronous task context. The folder. The UIDs of the messages. The message flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of flags from the specified messages. Removes a set of flags from the specified messages. The folder. The UIDs of the messages. The message flags to remove. A set of user-defined flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of flags from the specified messages. Asynchronously removes a set of flags from the specified messages. An asynchronous task context. The folder. The UIDs of the messages. The message flags to remove. A set of user-defined flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the flags of the specified message. Sets the flags of the specified message. The folder. The UIDs of the message. The message flags to set. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the flags of the specified message. Asynchronously sets the flags of the specified message. An asynchronous task context. The folder. The UID of the message. The message flags to set. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The folder is not currently open in read-write mode. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the flags of the specified message. Sets the flags of the specified message. The folder. The UIDs of the message. The message flags to set. A set of user-defined flags to set. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the flags of the specified message. Asynchronously sets the flags of the specified message. An asynchronous task context. The folder. The UID of the message. The message flags to set. A set of user-defined flags to set. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the flags of the specified messages. Sets the flags of the specified messages. The folder. The UIDs of the messages. The message flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the flags of the specified messages. Asynchronously sets the flags of the specified messages. An asynchronous task context. The folder. The UIDs of the messages. The message flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the flags of the specified messages. Sets the flags of the specified messages. The folder. The UIDs of the messages. The message flags to set. A set of user-defined flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the flags of the specified messages. Asynchronously sets the flags of the specified messages. An asynchronous task context. The folder. The UIDs of the messages. The message flags to set. A set of user-defined flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of flags to the specified messages only if their mod-sequence value is less than the specified value. Adds a set of flags to the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The message flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of flags to the specified messages only if their mod-sequence value is less than the specified value. Asynchronously adds a set of flags to the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The message flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of flags to the specified messages only if their mod-sequence value is less than the specified value. Adds a set of flags to the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The message flags to add. A set of user-defined flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of flags to the specified messages only if their mod-sequence value is less than the specified value. Asynchronously adds a set of flags to the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The message flags to add. A set of user-defined flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of flags from the specified messages only if their mod-sequence value is less than the specified value. Removes a set of flags from the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The message flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of flags from the specified messages only if their mod-sequence value is less than the specified value. Asynchronously removes a set of flags from the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The message flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of flags from the specified messages only if their mod-sequence value is less than the specified value. Removes a set of flags from the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The message flags to remove. A set of user-defined flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of flags from the specified messages only if their mod-sequence value is less than the specified value. Asynchronously removes a set of flags from the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The message flags to remove. A set of user-defined flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the flags of the specified messages only if their mod-sequence value is less than the specified value. Sets the flags of the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The message flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the flags of the specified messages only if their mod-sequence value is less than the specified value. Asynchronously sets the flags of the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The message flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the flags of the specified messages only if their mod-sequence value is less than the specified value. Sets the flags of the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The message flags to set. A set of user-defined flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the flags of the specified messages only if their mod-sequence value is less than the specified value. Asynchronously sets the flags of the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The message flags to set. A set of user-defined flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of flags to the specified message. Adds a set of flags to the specified message. The folder. The index of the message. The message flags to add. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of flags to the specified message. Asynchronously adds a set of flags to the specified message. An asynchronous task context. The folder. The index of the messages. The message flags to add. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of flags to the specified message. Adds a set of flags to the specified message. The folder. The index of the message. The message flags to add. A set of user-defined flags to add. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of flags to the specified message. Asynchronously adds a set of flags to the specified message. An asynchronous task context. The folder. The index of the messages. The message flags to add. A set of user-defined flags to add. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of flags to the specified messages. Adds a set of flags to the specified messages. The folder. The indexes of the messages. The message flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of flags to the specified messages. Asynchronously adds a set of flags to the specified messages. An asynchronous task context. The folder. The indexes of the messages. The message flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of flags to the specified messages. Adds a set of flags to the specified messages. The folder. The indexes of the messages. The message flags to add. A set of user-defined flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of flags to the specified messages. Asynchronously adds a set of flags to the specified messages. An asynchronous task context. The folder. The indexes of the messages. The message flags to add. A set of user-defined flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of flags from the specified message. Removes a set of flags from the specified message. The folder. The index of the message. The message flags to remove. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of flags from the specified message. Asynchronously removes a set of flags from the specified message. An asynchronous task context. The folder. The index of the message. The message flags to remove. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of flags from the specified message. Removes a set of flags from the specified message. The folder. The index of the message. The message flags to remove. A set of user-defined flags to remove. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of flags from the specified message. Asynchronously removes a set of flags from the specified message. An asynchronous task context. The folder. The index of the message. The message flags to remove. A set of user-defined flags to remove. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of flags from the specified messages. Removes a set of flags from the specified messages. The folder. The indexes of the messages. The message flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of flags from the specified messages. Asynchronously removes a set of flags from the specified messages. An asynchronous task context. The folder. The indexes of the messages. The message flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of flags from the specified messages. Removes a set of flags from the specified messages. The folder. The indexes of the messages. The message flags to remove. A set of user-defined flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of flags from the specified messages. Asynchronously removes a set of flags from the specified messages. An asynchronous task context. The folder. The indexes of the messages. The message flags to remove. A set of user-defined flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the flags of the specified message. Sets the flags of the specified message. The folder. The index of the message. The message flags to set. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the flags of the specified message. Asynchronously sets the flags of the specified message. An asynchronous task context. The folder. The index of the message. The message flags to set. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the flags of the specified message. Sets the flags of the specified message. The folder. The index of the message. The message flags to set. A set of user-defined flags to set. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the flags of the specified message. Asynchronously sets the flags of the specified message. An asynchronous task context. The folder. The index of the message. The message flags to set. A set of user-defined flags to set. If set to , no events will be emitted. The cancellation token. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the flags of the specified messages. Sets the flags of the specified messages. The folder. The indexes of the messages. The message flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the flags of the specified messages. Asynchronously sets the flags of the specified messages. An asynchronous task context. The folder. The indexes of the messages. The message flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the flags of the specified messages. Sets the flags of the specified messages. The folder. The indexes of the messages. The message flags to set. A set of user-defined flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the flags of the specified messages. Asynchronously sets the flags of the specified messages. An asynchronous task context. The folder. The indexes of the messages. The message flags to set. A set of user-defined flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of flags to the specified messages only if their mod-sequence value is less than the specified value. Adds a set of flags to the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The message flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of flags to the specified messages only if their mod-sequence value is less than the specified value. Asynchronously adds a set of flags to the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The message flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of flags to the specified messages only if their mod-sequence value is less than the specified value. Adds a set of flags to the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The message flags to add. A set of user-defined flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of flags to the specified messages only if their mod-sequence value is less than the specified value. Asynchronously adds a set of flags to the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The message flags to add. A set of user-defined flags to add. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of flags from the specified messages only if their mod-sequence value is less than the specified value. Removes a set of flags from the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The message flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of flags from the specified messages only if their mod-sequence value is less than the specified value. Asynchronously removes a set of flags from the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The message flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of flags from the specified messages only if their mod-sequence value is less than the specified value. Removes a set of flags from the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The message flags to remove. A set of user-defined flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of flags from the specified messages only if their mod-sequence value is less than the specified value. Asynchronously removes a set of flags from the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The message flags to remove. A set of user-defined flags to remove. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the flags of the specified messages only if their mod-sequence value is less than the specified value. Sets the flags of the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The message flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the flags of the specified messages only if their mod-sequence value is less than the specified value. Asynchronously sets the flags of the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The message flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the flags of the specified messages only if their mod-sequence value is less than the specified value. Sets the flags of the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The message flags to set. A set of user-defined flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the flags of the specified messages only if their mod-sequence value is less than the specified value. Asynchronously sets the flags of the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The message flags to set. A set of user-defined flags to set. If set to , no events will be emitted. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of labels to the specified message. Adds a set of labels to the specified message. The folder. The UID of the message. The labels to add. If set to , no events will be emitted. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of labels to the specified message. Asynchronously adds a set of labels to the specified message. An asynchronous task context. The folder. The UID of the message. The labels to add. If set to , no events will be emitted. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of labels to the specified messages. Adds a set of labels to the specified messages. The folder. The UIDs of the messages. The labels to add. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of labels to the specified messages. Asynchronously adds a set of labels to the specified messages. An asynchronous task context. The folder. The UIDs of the messages. The labels to add. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of labels from the specified message. Removes a set of labels from the specified message. The folder. The UIDs of the message. The labels to remove. If set to , no events will be emitted. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of labels from the specified message. Asynchronously removes a set of labels from the specified message. An asynchronous task context. The folder. The UID of the message. The labels to remove. If set to , no events will be emitted. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of labels from the specified messages. Removes a set of labels from the specified messages. The folder. The UIDs of the messages. The labels to remove. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of labels from the specified messages. Asynchronously removes a set of labels from the specified messages. An asynchronous task context. The folder. The UIDs of the messages. The labels to remove. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the labels of the specified message. Sets the labels of the specified message. The folder. The UIDs of the message. The labels to set. If set to , no events will be emitted. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the labels of the specified message. Asynchronously sets the labels of the specified message. An asynchronous task context. The folder. The UID of the message. The labels to set. If set to , no events will be emitted. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the labels of the specified messages. Sets the labels of the specified messages. The folder. The UIDs of the messages. The labels to set. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the labels of the specified messages. Asynchronously sets the labels of the specified messages. An asynchronous task context. The folder. The UIDs of the messages. The labels to set. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of labels to the specified messages only if their mod-sequence value is less than the specified value. Adds a set of labels to the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The labels to add. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of labels to the specified messages only if their mod-sequence value is less than the specified value. Asynchronously adds a set of labels to the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The labels to add. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of labels from the specified messages only if their mod-sequence value is less than the specified value. Removes a set of labels from the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The labels to remove. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of labels from the specified messages only if their mod-sequence value is less than the specified value. Asynchronously removes a set of labels from the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The labels to remove. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the labels of the specified messages only if their mod-sequence value is less than the specified value. Sets the labels of the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The labels to set. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the labels of the specified messages only if their mod-sequence value is less than the specified value. Asynchronously sets the labels of the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The folder. The UIDs of the messages. The mod-sequence value. The labels to set. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of labels to the specified message. Adds a set of labels to the specified message. The folder. The index of the message. The labels to add. If set to , no events will be emitted. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of labels to the specified message. Asynchronously adds a set of labels to the specified message. An asynchronous task context. The folder. The index of the messages. The labels to add. If set to , no events will be emitted. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of labels to the specified messages. Adds a set of labels to the specified messages. The folder. The indexes of the messages. The labels to add. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of labels to the specified messages. Asynchronously adds a set of labels to the specified messages. An asynchronous task context. The folder. The indexes of the messages. The labels to add. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of labels from the specified message. Removes a set of labels from the specified message. The folder. The index of the message. The labels to remove. If set to , no events will be emitted. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of labels from the specified message. Asynchronously removes a set of labels from the specified message. An asynchronous task context. The folder. The index of the message. The labels to remove. If set to , no events will be emitted. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of labels from the specified messages. Removes a set of labels from the specified messages. The folder. The indexes of the messages. The labels to remove. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of labels from the specified messages. Asynchronously removes a set of labels from the specified messages. An asynchronous task context. The folder. The indexes of the messages. The labels to remove. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the labels of the specified message. Sets the labels of the specified message. The folder. The index of the message. The labels to set. If set to , no events will be emitted. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the labels of the specified message. Asynchronously sets the labels of the specified message. An asynchronous task context. The folder. The index of the message. The labels to set. If set to , no events will be emitted. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the labels of the specified messages. Sets the labels of the specified messages. The folder. The indexes of the messages. The labels to set. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the labels of the specified messages. Asynchronously sets the labels of the specified messages. An asynchronous task context. The folder. The indexes of the messages. The labels to set. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add a set of labels to the specified messages only if their mod-sequence value is less than the specified value. Adds a set of labels to the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The labels to add. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add a set of labels to the specified messages only if their mod-sequence value is less than the specified value. Asynchronously adds a set of labels to the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The labels to add. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove a set of labels from the specified messages only if their mod-sequence value is less than the specified value. Removes a set of labels from the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The labels to remove. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove a set of labels from the specified messages only if their mod-sequence value is less than the specified value. Asynchronously removes a set of labels from the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The labels to remove. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the labels of the specified messages only if their mod-sequence value is less than the specified value. Sets the labels of the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The labels to set. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the labels of the specified messages only if their mod-sequence value is less than the specified value. Asynchronously sets the labels of the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The folder. The indexes of the messages. The mod-sequence value. The labels to set. If set to , no events will be emitted. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. An interface for message services such as SMTP, POP3, or IMAP. Implemented by , and . Get an object that can be used to synchronize access to the folder. Gets an object that can be used to synchronize access to the folder. The sync root. Get or set the set of enabled SSL and/or TLS protocol versions that the client is allowed to use. Gets or sets the enabled SSL and/or TLS protocol versions that the client is allowed to use. By default, MailKit initializes this value to which allows the operating system to choose the best protocol to use and to block protocols that are not secure. This property should be set before calling any of the Connect or ConnectAsync methods. The SSL and TLS protocol versions that are supported. Get or set the client SSL certificates. Some servers may require the client SSL certificates in order to allow the user to connect. This property should be set before calling any of the Connect or ConnectAsync methods. The client SSL certificates. Get or set whether connecting via SSL/TLS should check certificate revocation. Gets or sets whether connecting via SSL/TLS should check certificate revocation. Normally, the value of this property should be set to (the default) for security reasons, but there are times when it may be necessary to set it to . For example, most Certificate Authorities are probably pretty good at keeping their CRL and/or OCSP servers up 24/7, but occasionally they do go down or are otherwise unreachable due to other network problems between the client and the Certificate Authority. When this happens, it becomes impossible to check the revocation status of one or more of the certificates in the chain resulting in an being thrown in the Connect method. If this becomes a problem, it may become desirable to set to . if certificate revocation should be checked; otherwise, . Get or set a callback function to validate the server certificate. Gets or sets a callback function to validate the server certificate. This property should be set before calling any of the Connect or ConnectAsync methods. The server certificate validation callback function. Get or set the local IP end point to use when connecting to a remote host. Gets or sets the local IP end point to use when connecting to a remote host. The local IP end point or to use the default end point. Get or set the proxy client to use when connecting to a remote host. Gets or sets the proxy client to use when connecting to a remote host via any of the Connect methods. The proxy client. Get the authentication mechanisms supported by the message service. The authentication mechanisms are queried during the Connect method. The supported authentication mechanisms. Get whether or not the client is currently authenticated with the mail server. Gets whether or not the client is currently authenticated with the mail server. To authenticate with the mail server, use one of the Authenticate methods or any of the Async alternatives. if the client is authenticated; otherwise, . Get whether or not the service is currently connected. The state is set to immediately after one of the Connect methods succeeds and is not set back to until either the client is disconnected via or until a is thrown while attempting to read or write to the underlying network socket. When an is caught, the connection state of the should be checked before continuing. if the service connected; otherwise, . Get whether or not the connection is secure (typically via SSL or TLS). Gets whether or not the connection is secure (typically via SSL or TLS). if the connection is secure; otherwise, . Get whether or not the connection is encrypted (typically via SSL or TLS). Gets whether or not the connection is encrypted (typically via SSL or TLS). if the connection is encrypted; otherwise, . Get whether or not the connection is signed (typically via SSL or TLS). Gets whether or not the connection is signed (typically via SSL or TLS). if the connection is signed; otherwise, . Get the negotiated SSL or TLS protocol version. Gets the negotiated SSL or TLS protocol version once an SSL or TLS connection has been made. The negotiated SSL or TLS protocol version. Get the negotiated SSL or TLS cipher algorithm. Gets the negotiated SSL or TLS cipher algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS cipher algorithm. Get the negotiated SSL or TLS cipher algorithm strength. Gets the negotiated SSL or TLS cipher algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS cipher algorithm strength. Get the negotiated SSL or TLS hash algorithm. Gets the negotiated SSL or TLS hash algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS hash algorithm. Get the negotiated SSL or TLS hash algorithm strength. Gets the negotiated SSL or TLS hash algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS hash algorithm strength. Get the negotiated SSL or TLS key exchange algorithm. Gets the negotiated SSL or TLS key exchange algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS key exchange algorithm. Get the negotiated SSL or TLS key exchange algorithm strength. Gets the negotiated SSL or TLS key exchange algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS key exchange algorithm strength. Get or set the timeout for network streaming operations, in milliseconds. Gets or sets the underlying socket stream's and values. The timeout in milliseconds. Establish a connection to the specified mail server. Establish a connection to the specified mail server. If a successful connection is made, the property will be populated. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. if the client should make an SSL-wrapped connection to the server; otherwise, . The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The is already connected. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Asynchronously establish a connection to the specified mail server. Asynchronously establishes a connection to the specified mail server. If a successful connection is made, the property will be populated. An asynchronous task context. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. if the client should make an SSL-wrapped connection to the server; otherwise, . The cancellation token. The is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. The operation was canceled via the cancellation token. An I/O error occurred. A protocol error occurred. Establish a connection to the specified mail server. Establish a connection to the specified mail server. If a successful connection is made, the property will be populated. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The is already connected. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Asynchronously establish a connection to the specified mail server. Asynchronously establishes a connection to the specified mail server. If a successful connection is made, the property will be populated. An asynchronous task context. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. The is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. The operation was canceled via the cancellation token. An I/O error occurred. A protocol error occurred. Establish a connection to the specified mail server using the provided socket. Establish a connection to the specified mail server using the provided socket. If a successful connection is made, the property will be populated. The socket to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. is not connected. -or- The is a zero-length string. The is already connected. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Asynchronously establish a connection to the specified mail server using the provided socket. Asynchronously establishes a connection to the specified mail server using the provided socket. If a successful connection is made, the property will be populated. An asynchronous task context. The socket to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. is not connected. -or- The is a zero-length string. The is already connected. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Establish a connection to the specified mail server using the provided stream. Establish a connection to the specified mail server using the provided stream. If a successful connection is made, the property will be populated. The stream to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. The is a zero-length string. The is already connected. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Asynchronously establish a connection to the specified mail server using the provided stream. Asynchronously establishes a connection to the specified mail server using the provided stream. If a successful connection is made, the property will be populated. An asynchronous task context. The stream to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. The is a zero-length string. The is already connected. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Authenticate using the supplied credentials. Authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. The user's credentials. The cancellation token. is . The has been disposed. The is not connected. The is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Asynchronously authenticate using the supplied credentials. Asynchronously authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. An asynchronous task context. The user's credentials. The cancellation token. is . The has been disposed. The is not connected. The is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Authenticate using the supplied credentials. Authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. The encoding to use for the user's credentials. The user's credentials. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Asynchronously authenticate using the supplied credentials. Asynchronously authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. An asynchronous task context. The encoding to use for the user's credentials. The user's credentials. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Authenticate using the specified user name and password. Authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. The encoding to use for the user's credentials. The user name. The password. The cancellation token. is . -or- is . -or- is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Asynchronously authenticate using the specified user name and password. Asynchronously authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. An asynchronous task context. The encoding to use for the user's credentials. The user name. The password. The cancellation token. is . -or- is . -or- is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Authenticate using the specified user name and password. Authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. The user name. The password. The cancellation token. is . -or- is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Asynchronously authenticate using the specified user name and password. Asynchronously authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. An asynchronous task context. The user name. The password. The cancellation token. is . -or- is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Authenticate using the specified SASL mechanism. Authenticates using the specified SASL mechanism. For a list of available SASL authentication mechanisms supported by the server, check the property after the service has been connected. The SASL mechanism. The cancellation token. is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Asynchronously authenticate using the specified SASL mechanism. Authenticates using the specified SASL mechanism. For a list of available SASL authentication mechanisms supported by the server, check the property after the service has been connected. An asynchronous task context. The SASL mechanism. The cancellation token. is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Disconnect the service. Disconnects from the service. If is , a "QUIT" command will be issued in order to disconnect cleanly. If set to , a "QUIT" command will be issued in order to disconnect cleanly. The cancellation token. The has been disposed. The is not connected. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Asynchronously disconnect the service. Asynchronously disconnects from the service. If is , a "QUIT" command will be issued in order to disconnect cleanly. An asynchronous task context. If set to , a logout/quit command will be issued in order to disconnect cleanly. The cancellation token. The has been disposed. The is not connected. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Ping the message service to keep the connection alive. Mail servers, if left idle for too long, will automatically drop the connection. The cancellation token. The has been disposed. The is not connected. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Asynchronously ping the mail server to keep the connection alive. Mail servers, if left idle for too long, will automatically drop the connection. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Occurs when the client has been successfully connected. The event is raised when the client successfully connects to the mail server. Occurs when the client has been disconnected. The event is raised whenever the client has been disconnected. Occurs when the client has been successfully authenticated. The event is raised whenever the client has been authenticated. An interface for retrieving messages from a spool. An interface for retrieving messages from a spool. Implemented by . Get the number of messages available in the message spool. Gets the number of messages available in the message spool. Once authenticated, the property will be set to the number of available messages in the spool. The message count. Get whether or not the service supports referencing messages by UIDs. Not all servers support referencing messages by UID, so this property should be checked before using and . If the server does not support UIDs, then all methods that take UID arguments along with and will fail. if supports uids; otherwise, . Get the message count. Gets the message count. The message count. The cancellation token. Asynchronously get the message count. Asynchronously gets the message count. The message count. The cancellation token. Get the UID of the message at the specified index. Not all servers support UIDs, so you should first check the property. The message UID. The message index. The cancellation token. Asynchronously get the UID of the message at the specified index. Not all servers support UIDs, so you should first check the property. The message UID. The message index. The cancellation token. Get the full list of available message UIDs. Not all servers support UIDs, so you should first check the property. The message UIDs. The cancellation token. Asynchronously get the full list of available message UIDs. Not all servers support UIDs, so you should first check the property. The message UIDs. The cancellation token. Get the size of the specified message, in bytes. Gets the size of the specified message, in bytes. The message size, in bytes. The index of the message. The cancellation token. Asynchronously get the size of the specified message, in bytes. Asynchronously gets the size of the specified message, in bytes. The message size, in bytes. The index of the message. The cancellation token. Get the sizes for all available messages, in bytes. Gets the sizes for all available messages, in bytes. The message sizes, in bytes. The cancellation token. Asynchronously get the sizes for all available messages, in bytes. Asynchronously gets the sizes for all available messages, in bytes. The message sizes, in bytes. The cancellation token. Get the headers for the specified message. Gets the headers for the specified message. The message headers. The index of the message. The cancellation token. Asynchronously get the headers for the specified message. Asynchronously gets the headers for the specified message. The message headers. The index of the message. The cancellation token. Get the headers for the specified messages. Gets the headers for the specified messages. The headers for the specified messages. The indexes of the messages. The cancellation token. Asynchronously get the headers for the specified messages. Asynchronously gets the headers for the specified messages. The headers for the specified messages. The indexes of the messages. The cancellation token. Get the headers of the messages within the specified range. Gets the headers of the messages within the specified range. The headers of the messages within the specified range. The index of the first message to get. The number of messages to get. The cancellation token. Get the headers of the messages within the specified range. Gets the headers of the messages within the specified range. The headers of the messages within the specified range. The index of the first message to get. The number of messages to get. The cancellation token. Get the message at the specified index. Gets the message at the specified index. The message. The index of the message. The cancellation token. The progress reporting mechanism. Asynchronously get the message at the specified index. Asynchronously gets the message at the specified index. The message. The index of the message. The cancellation token. The progress reporting mechanism. Get the messages at the specified indexes. Gets the messages at the specified indexes. The messages. The indexes of the messages. The cancellation token. The progress reporting mechanism. Asynchronously get the messages at the specified indexes. Asynchronously gets the messages at the specified indexes. The messages. The indexes of the messages. The cancellation token. The progress reporting mechanism. Get the messages within the specified range. Gets the messages within the specified range. The messages. The index of the first message to get. The number of messages to get. The cancellation token. The progress reporting mechanism. Asynchronously get the messages within the specified range. Asynchronously gets the messages within the specified range. The messages. The index of the first message to get. The number of messages to get. The cancellation token. The progress reporting mechanism. Get the message or header stream at the specified index. Gets the message or header stream at the specified index. The message or header stream. The index of the message. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. Asynchronously get the message or header stream at the specified index. Asynchronously gets the message or header stream at the specified index. The message or header stream. The index of the message. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. Get the message or header streams at the specified index. Gets the message or header streams at the specified index. The message or header streams. The indexes of the messages. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. Asynchronously get the message or header streams at the specified indexes. Asynchronously gets the message or header streams at the specified indexes. The message or header streams. The indexes of the messages. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. Get the message or header streams within the specified range. Gets the message or header streams within the specified range. The message or header streams. The index of the first stream to get. The number of streams to get. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. Asynchronously get the message or header streams within the specified range. Asynchronously gets the message or header streams within the specified range. The messages. The index of the first stream to get. The number of streams to get. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. Mark the specified message for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The index of the message. The cancellation token. Asynchronously mark the specified message for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The index of the message. The cancellation token. Mark the specified messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The indexes of the messages. The cancellation token. Asynchronously mark the specified messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The indexes of the messages. The cancellation token. Mark the specified range of messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The index of the first message to mark for deletion. The number of messages to mark for deletion. The cancellation token. Asynchronously mark the specified range of messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The index of the first message to mark for deletion. The number of messages to mark for deletion. The cancellation token. Mark all messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The cancellation token. Asynchronously mark all messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The cancellation token. Reset the state of all messages marked for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The cancellation token. Asynchronously reset the state of all messages marked for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The cancellation token. An interface for retrieving messages from a message store. An interface for retrieving messages from a message store. Implemented by . Get the personal namespaces. The personal folder namespaces contain a user's personal mailbox folders. The personal namespaces. Get the shared namespaces. The shared folder namespaces contain mailbox folders that are shared with the user. The shared namespaces. Get the other namespaces. The other folder namespaces contain other mailbox folders. The other namespaces. Get whether or not the mail store supports quotas. Gets whether or not the mail store supports quotas. if the mail store supports quotas; otherwise, . Get the threading algorithms supported by the mail store. The threading algorithms are queried as part of the Connect and Authenticate methods. The threading algorithms. Get the Inbox folder. The Inbox folder is the default folder and is typically the folder where all new messages are delivered. The Inbox folder. Enable the quick resynchronization feature. Enables quick resynchronization when a folder is opened using the method. If this feature is enabled, the event is replaced with the event. This method needs to be called immediately after , before the opening of any folders. The cancellation token. The has been disposed. The is not connected. The is not authenticated. Quick resynchronization needs to be enabled before selecting a folder. The mail store does not support quick resynchronization. The operation was canceled via the cancellation token. An I/O error occurred. A protocol error occurred. The command failed. Asynchronously enable the quick resynchronization feature. Enables quick resynchronization when a folder is opened using the method. If this feature is enabled, the event is replaced with the event. This method needs to be called immediately after , before the opening of any folders. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. Quick resynchronization needs to be enabled before selecting a folder. The mail store does not support quick resynchronization. The operation was canceled via the cancellation token. An I/O error occurred. A protocol error occurred. The command failed. Get the specified special folder. Not all message stores support the concept of special folders, so this method may return . The folder if available; otherwise . The type of special folder. is out of range. Get the folder for the specified namespace. The main reason to get the toplevel folder in a namespace is to list its child folders. The folder. The namespace. is . The folder could not be found. Get all of the folders within the specified namespace. Gets all of the folders within the specified namespace. The folders. The namespace. If set to , only subscribed folders will be listed. The cancellation token. is . The has been disposed. The operation was canceled via the cancellation token. The is not connected. The is not authenticated. The namespace folder could not be found. An I/O error occurred. A protocol error occurred. The command failed. Asynchronously get all of the folders within the specified namespace. Asynchronously gets all of the folders within the specified namespace. The folders. The namespace. If set to , only subscribed folders will be listed. The cancellation token. is . The has been disposed. The operation was canceled via the cancellation token. The is not connected. The is not authenticated. The namespace folder could not be found. An I/O error occurred. A protocol error occurred. The command failed. Get all of the folders within the specified namespace. Gets all of the folders within the specified namespace. The folders. The namespace. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. is . The has been disposed. The operation was canceled via the cancellation token. The is not connected. The is not authenticated. The namespace folder could not be found. An I/O error occurred. A protocol error occurred. The command failed. Asynchronously get all of the folders within the specified namespace. Asynchronously gets all of the folders within the specified namespace. The folders. The namespace. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. is . The has been disposed. The operation was canceled via the cancellation token. The is not connected. The is not authenticated. The namespace folder could not be found. An I/O error occurred. A protocol error occurred. The command failed. Get the folder for the specified path. Gets the folder for the specified path. The folder. The folder path. The cancellation token. is . The operation was canceled via the cancellation token. The folder could not be found. An I/O error occurred. A protocol error occurred. The command failed. Asynchronously get the folder for the specified path. Asynchronously gets the folder for the specified path. The folder. The folder path. The cancellation token. is . The operation was canceled via the cancellation token. The folder could not be found. An I/O error occurred. A protocol error occurred. The command failed. Gets the specified metadata. Gets the specified metadata. The requested metadata value. The metadata tag. The cancellation token. Asynchronously gets the specified metadata. Asynchronously gets the specified metadata. The requested metadata value. The metadata tag. The cancellation token. Gets the specified metadata. Gets the specified metadata. The requested metadata. The metadata tags. The cancellation token. Asynchronously gets the specified metadata. Asynchronously gets the specified metadata. The requested metadata. The metadata tags. The cancellation token. Gets the specified metadata. Gets the specified metadata. The requested metadata. The metadata options. The metadata tags. The cancellation token. Asynchronously gets the specified metadata. Asynchronously gets the specified metadata. The requested metadata. The metadata options. The metadata tags. The cancellation token. Sets the specified metadata. Sets the specified metadata. The metadata. The cancellation token. Asynchronously sets the specified metadata. Asynchronously sets the specified metadata. An asynchronous task context. The metadata. The cancellation token. Occurs when a remote message store receives an alert message from the server. Some implementations, such as , will emit Alert events when they receive alert messages from the server. Occurs when a folder is created. The event is emitted when a new folder is created. Occurs when metadata changes. The event is emitted when metadata changes. An interface for sending messages. An interface for sending messages. Implemented by . Send the specified message. Sends the specified message. The sender address is determined by checking the following message headers (in order of precedence): Resent-Sender, Resent-From, Sender, and From. If either the Resent-Sender or Resent-From addresses are present, the recipients are collected from the Resent-To, Resent-Cc, and Resent-Bcc headers, otherwise the To, Cc, and Bcc headers are used. The final free-form text response from the server. The message. The cancellation token. The progress reporting mechanism. Asynchronously send the specified message. Asynchronously sends the specified message. The sender address is determined by checking the following message headers (in order of precedence): Resent-Sender, Resent-From, Sender, and From. If either the Resent-Sender or Resent-From addresses are present, the recipients are collected from the Resent-To, Resent-Cc, and Resent-Bcc headers, otherwise the To, Cc, and Bcc headers are used. The final free-form text response from the server. The message. The cancellation token. The progress reporting mechanism. Send the specified message using the supplied sender and recipients. Sends the specified message using the supplied sender and recipients. The final free-form text response from the server. The message. The mailbox address to use for sending the message. The mailbox addresses that should receive the message. The cancellation token. The progress reporting mechanism. Asynchronously send the specified message using the supplied sender and recipients. Asynchronously sends the specified message using the supplied sender and recipients. The final free-form text response from the server. The message. The mailbox address to use for sending the message. The mailbox addresses that should receive the message. The cancellation token. The progress reporting mechanism. Send the specified message. Sends the specified message. The sender address is determined by checking the following message headers (in order of precedence): Resent-Sender, Resent-From, Sender, and From. If either the Resent-Sender or Resent-From addresses are present, the recipients are collected from the Resent-To, Resent-Cc, and Resent-Bcc headers, otherwise the To, Cc, and Bcc headers are used. The final free-form text response from the server. The formatting options. The message. The cancellation token. The progress reporting mechanism. Asynchronously send the specified message. Asynchronously sends the specified message. The sender address is determined by checking the following message headers (in order of precedence): Resent-Sender, Resent-From, Sender, and From. If either the Resent-Sender or Resent-From addresses are present, the recipients are collected from the Resent-To, Resent-Cc, and Resent-Bcc headers, otherwise the To, Cc, and Bcc headers are used. The final free-form text response from the server. The formatting options. The message. The cancellation token. The progress reporting mechanism. Send the specified message using the supplied sender and recipients. Sends the specified message using the supplied sender and recipients. The final free-form text response from the server. The formatting options. The message. The mailbox address to use for sending the message. The mailbox addresses that should receive the message. The cancellation token. The progress reporting mechanism. Asynchronously send the specified message using the supplied sender and recipients. Asynchronously sends the specified message using the supplied sender and recipients. The final free-form text response from the server. The formatting options. The message. The mailbox address to use for sending the message. The mailbox addresses that should receive the message. The cancellation token. The progress reporting mechanism. Occurs when a message is successfully sent via the transport. The event will be emitted each time a message is successfully sent. A summary of a message. The Fetch and FetchAsync methods return lists of items. The properties of the that will be available depend on the passed to the aforementioned method. Get the folder that the message belongs to. Gets the folder that the message belongs to, if available. The folder. Get a bitmask of fields that have been populated. Gets a bitmask of fields that have been populated. The fields that have been populated. Gets the body structure of the message, if available. The body will be one of , , , or . This property will only be set if either the flag or the flag is passed to one of the Fetch or FetchAsync methods. The body structure of the message. Gets the text body part of the message if it exists. Gets the text/plain body part of the message. This property will only be usable if the flag is passed to one of the Fetch or FetchAsync methods. The text body if it exists; otherwise, . Gets the html body part of the message if it exists. Gets the text/html body part of the message. This property will only be usable if the flag is passed to one of the Fetch or FetchAsync methods. The html body if it exists; otherwise, . Gets the body parts of the message. Traverses over the , enumerating all of the objects. This property will only be usable if either the flag or the flag is passed to one of the Fetch or FetchAsync methods. The body parts. Gets the attachments. Traverses over the , enumerating all of the objects that have a Content-Disposition header set to "attachment". This property will only be usable if the flag is passed to one of the Fetch or FetchAsync methods. The attachments. Gets the preview text of the message. The preview text is a short snippet of the beginning of the message text, typically shown in a mail client's message list to provide the user with a sense of what the message is about. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The preview text. Gets the envelope of the message, if available. The envelope of a message contains information such as the date the message was sent, the subject of the message, the sender of the message, who the message was sent to, which message(s) the message may be in reply to, and the message id. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The envelope of the message. Gets the normalized subject. A normalized Subject header value where prefixes such as "Re:", "Re[#]:" and "FWD:" have been pruned. This property is typically used for threading messages by subject. The normalized subject. Gets the Date header value. Gets the Date header value. If the Date header is not present, the arrival date is used. If neither are known, is returned. The date. Gets whether or not the message is a reply. This value should be based on whether the message subject contained any "Re:", "Re[#]:" or "FWD:" prefixes. if the message is a reply; otherwise, . Gets the message flags, if available. Gets the message flags, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The message flags. Gets the user-defined message flags, if available. Gets the user-defined message flags, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The user-defined message flags. Gets the message annotations, if available. Gets the message annotations, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The message annotations. Gets the list of headers, if available. Gets the list of headers, if available. This property will only be set if the used with Fetch or FetchAsync has the flag set on or if the list is non-empty. The list of headers. Gets the internal date of the message, if available. Gets the internal date of the message (often the same date as found in the Received header), if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The internal date of the message. Gets the date and time that the message was saved to the current mailbox, if available. Gets the date and time that the message was saved to the current mailbox, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The save date of the message. Gets the size of the message, in bytes, if available. Gets the size of the message, in bytes, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The size of the message. Gets the mod-sequence value for the message, if available. Gets the mod-sequence value for the message, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The mod-sequence value. Gets the message-ids that the message references, if available. Gets the message-ids that the message references, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The references. Get the globally unique identifier for the message, if available. Gets the globally unique identifier of the message, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. This property maps to the EMAILID value defined in the OBJECTID extension. The globally unique message identifier. Get the globally unique thread identifier for the message, if available. Gets the globally unique thread identifier for the message, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. This property maps to the THREADID value defined in the OBJECTID extension. The globally unique thread identifier. Gets the unique identifier of the message, if available. Gets the unique identifier of the message, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The uid of the message. Gets the index of the message. Gets the index of the message. This property is always set. The index of the message. Gets the GMail message identifier, if available. Gets the GMail message identifier, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The GMail message identifier. Gets the GMail thread identifier, if available. Gets the GMail thread identifier, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The GMail thread identifier. Gets the list of GMail labels, if available. Gets the list of GMail labels, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The GMail labels. An interface for logging the communication between a client and server. An interface for logging the communication between a client and server. Get or set the authentication secret detector. Gets or sets the authentication secret detector. The authentication secret detector. Logs a connection to the specified URI. Logs a connection to the specified URI. The URI. is . The logger has been disposed. An I/O error occurred. Logs a sequence of bytes sent by the client. Logs a sequence of bytes sent by the client. is called by the upon every successful write operation to its underlying network stream, passing the exact same , , and arguments to the logging function. The buffer to log. The offset of the first byte to log. The number of bytes to log. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The logger has been disposed. An I/O error occurred. Logs a sequence of bytes sent by the server. Logs a sequence of bytes sent by the server. is called by the upon every successful read of its underlying network stream with the exact buffer that was read. The buffer to log. The offset of the first byte to log. The number of bytes to log. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The logger has been disposed. An I/O error occurred. A request for replacing a message in a folder. A request for replacing a message in a folder. Get or set the folder where the replacement message should be appended. Gets or sets the folder where the replacement message should be appended. If no destination folder is specified, then the replacement message will be appended to the original folder. The destination folder. A request for storing message flags. A request for storing message flags. Get the store action to perform. Gets the store action to perform. The store action. Get or set the message flags that should be added, removed, or set. Gets or sets the message flags that should be added, removed, or set. The message flags. Get the keywords that should be added, removed, or set. Gets the keywords that should be added, removed, or set. The keywords. Get or set whether the store operation should run silently. Gets or sets whether the store operation should run silently. Normally, when flags or keywords are changed on a message, a event is emitted. By setting to , this event will not be emitted as a result of this store operation. if the store operation should run silently (not emitting events for flag changes); otherwise, . A request for storing GMail-style labels for a message. A request for storing GMail-style labels for a message. Get the store action to perform. Gets the store action to perform. The store action. Get the GMail-style labels that should be added, removed, or set. Gets the GMail-style labels that should be added, removed, or set. The GMail-style labels. Get or set whether the store operation should run silently. Gets or sets whether the store operation should run silently. Normally, when flags or keywords are changed on a message, a event is emitted. By setting to , this event will not be emitted as a result of this store operation. if the store operation should run silently (not emitting events for label changes); otherwise, . A request for storing flags, labels, or annotations for a message. A request for storing flags, labels, or annotations for a message. Get or set the mod-sequence value that indicates the last known state of the message(s) being updated. Gets or sets the mod-sequence value that indicates the last known state of the message(s) being updated. If this property is set, only messages that have not had their flags modified since the specified mod-sequence state will have their flags updated by the Store or StoreAsync methods. The mod-sequence value that indicates the last known state of the message(s) being updated. An interface for reporting progress of uploading or downloading messages. An interface for reporting progress of uploading or downloading messages. Report the progress of the transfer operation. Reports the progress of the transfer operation. This method is only used if the operation knows the size of the message, part, or stream being transferred without doing extra work to calculate it. The number of bytes transferred. The total size, in bytes, of the message, part, or stream being transferred. Report the progress of the transfer operation. Reports the progress of the transfer operation. The number of bytes transferred. An abstract mail folder implementation. An abstract mail folder implementation. The bit mask of settable flags. Only flags in the list of settable flags may be set on a message by the client. Initialize a new instance of the class. Initializes a new instance of the class. Get an object that can be used to synchronize access to the folder. Gets an object that can be used to synchronize access to the folder. The sync root. Get the parent folder. Root-level folders do not have a parent folder. The parent folder. Get the folder attributes. Gets the folder attributes. The folder attributes. Get the annotation access level. If annotations are supported, this property can be used to determine whether or not the supports reading and writing annotations. The annotation access level. Get the supported annotation scopes. If annotations are supported, this property can be used to determine which annotation scopes are supported by the . The supported annotation scopes. Get the maximum size of annotation values supported by the folder. If annotations are supported, this property can be used to determine the maximum size of annotation values supported by the . The maximum size of annotation values supported by the folder. Get the permanent flags. The permanent flags are the message flags that will persist between sessions. If the flag is set, then the folder allows storing of user-defined keywords. The permanent flags. Get the permanent keywords. The permanent keywords are the keywords that will persist between sessions. If the flag is set in , then the folder allows storing of user-defined keywords as well. The permanent keywords. Get the accepted flags. The accepted flags are the message flags that will be accepted and persist for the current session. For the set of flags that will persist between sessions, see the property. The accepted flags. Get the accepted keywords. The accepted keywords are the keywords that will be accepted and persist for the current session. For the set of keywords that will persist between sessions, see the property. The accepted keywords. Get the directory separator. Gets the directory separator. The directory separator. Get the read/write access of the folder. Gets the read/write access of the folder. The read/write access. Get whether or not the folder is a namespace folder. Gets whether or not the folder is a namespace folder. if the folder is a namespace folder; otherwise, . Get the full name of the folder. This is the equivalent of the full path of a file on a file system. The full name of the folder. Get the name of the folder. This is the equivalent of the file name of a file on the file system. The name of the folder. Get the unique identifier for the folder, if available. Gets a unique identifier for the folder, if available. This is useful for clients implementing a message cache that want to track the folder after it is renamed by another client. This property will only be available if the server supports the OBJECTID extension. The unique folder identifier. Get a value indicating whether the folder is subscribed. Gets a value indicating whether the folder is subscribed. if the folder is subscribed; otherwise, . Get a value indicating whether the folder is currently open. Gets a value indicating whether the folder is currently open. if the folder is currently open; otherwise, . Get whether or not the folder can be opened. Gets whether or not the folder can be opened. if the folder can be opened; otherwise, . Get a value indicating whether the folder exists. Gets a value indicating whether the folder exists. if the folder exists; otherwise, . Get the highest mod-sequence value of all messages in the mailbox. Gets the highest mod-sequence value of all messages in the mailbox. The highest mod-sequence value. Get the UID validity. UIDs are only valid so long as the UID validity value remains unchanged. If and when the folder's is changed, a client MUST discard its cache of UIDs along with any summary information that it may have and re-query the folder. This value will only be set after the folder has been opened. The UID validity. Get the UID that the folder will assign to the next message that is added. This value will only be set after the folder has been opened. The next UID. Get the maximum size of a message that can be appended to the folder. Gets the maximum size of a message that can be appended to the folder. If the value is not set, then the limit is unspecified. The append limit. Get the size of the folder. Gets the size of the folder in bytes. If the value is not set, then the size is unspecified. The size of the folder, in bytes. Get the index of the first unread message in the folder. Gets the index of the first unread message in the folder. This value will only be set after the folder has been opened. A value of -1 indicates that there are no unread messages in the folder or that the server has not provided the index of the first unread message. The index of the first unread message or -1 if there are no unread messages in the folder. Get the number of unread messages in the folder. Gets the number of unread messages in the folder. This value will only be set after calling with . The number of unread messages. Get the number of recently delivered messages in the folder. Gets the number of recently delivered messages in the folder. This value will only be set after calling with or by opening the folder. The number of recently delivered messages. Get the total number of messages in the folder. Gets the total number of messages in the folder. This value will only be set after calling with or by opening the folder. The total number of messages. Get the threading algorithms supported by the folder. Gets the threading algorithms supported by the folder. The supported threading algorithms. Determine whether or not a supports a feature. Determines whether or not a supports a feature. The desired feature. if the feature is supported; otherwise, . Opens the folder using the requested folder access. This variant of the method is meant for quick resynchronization of the folder. Before calling this method, the method MUST be called. You should also make sure to add listeners to the and events to get notifications of changes since the last time the folder was opened. The state of the folder. The requested folder access. The last known value. The last known value. The last known list of unique message identifiers. The cancellation token. is not a valid value. The has been disposed. The is not connected. The is not authenticated. The does not exist. The quick resynchronization feature has not been enabled. The mail store does not support the quick resynchronization feature. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously opens the folder using the requested folder access. This variant of the method is meant for quick resynchronization of the folder. Before calling this method, the method MUST be called. You should also make sure to add listeners to the and events to get notifications of changes since the last time the folder was opened. The state of the folder. The requested folder access. The last known value. The last known value. The last known list of unique message identifiers. The cancellation token. is not a valid value. The has been disposed. The is not connected. The is not authenticated. The does not exist. The quick resynchronization feature has not been enabled. The mail store does not support the quick resynchronization feature. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Open the folder using the requested folder access. Opens the folder using the requested folder access. The state of the folder. The requested folder access. The cancellation token. is not a valid value. The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously open the folder using the requested folder access. Asynchronously opens the folder using the requested folder access. The state of the folder. The requested folder access. The cancellation token. is not a valid value. The has been disposed. The is not connected. The is not authenticated. The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Close the folder, optionally expunging the messages marked for deletion. Closes the folder, optionally expunging the messages marked for deletion. If set to , expunge. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously close the folder, optionally expunging the messages marked for deletion. Asynchronously closes the folder, optionally expunging the messages marked for deletion. An asynchronous task context. If set to , expunge. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Create a new subfolder with the given name. Creates a new subfolder with the given name. The created folder. The name of the folder to create. if the folder will be used to contain messages; otherwise, . The cancellation token. is . is empty. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously create a new subfolder with the given name. Asynchronously creates a new subfolder with the given name. The created folder. The name of the folder to create. if the folder will be used to contain messages; otherwise, . The cancellation token. is . is empty. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Create a new subfolder with the given name. Creates a new subfolder with the given name. The created folder. The name of the folder to create. A list of special uses for the folder being created. The cancellation token. is . -or- is . is empty. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The does not support the creation of special folders. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously create a new subfolder with the given name. Asynchronously creates a new subfolder with the given name. The created folder. The name of the folder to create. A list of special uses for the folder being created. The cancellation token. is . -or- is . is empty. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The does not support the creation of special folders. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Create a new subfolder with the given name. Creates a new subfolder with the given name. The created folder. The name of the folder to create. The special use for the folder being created. The cancellation token. is . is empty. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The does not support the creation of special folders. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously create a new subfolder with the given name. Asynchronously creates a new subfolder with the given name. The created folder. The name of the folder to create. The special use for the folder being created. The cancellation token. is . is empty. The has been disposed. The is not connected. The is not authenticated. The is nil, and thus child folders cannot be created. The does not support the creation of special folders. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Rename the folder. Renames the folder. The new parent folder. The new name of the folder. The cancellation token. is . -or- is . does not belong to the . -or- is not a legal folder name. The has been disposed. The is not connected. The is not authenticated. The folder cannot be renamed (it is either a namespace or the Inbox). The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously rename the folder. Asynchronously renames the folder. An asynchronous task context. The new parent folder. The new name of the folder. The cancellation token. is . -or- is . does not belong to the . -or- is not a legal folder name. The has been disposed. The is not connected. The is not authenticated. The folder cannot be renamed (it is either a namespace or the Inbox). The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Delete the folder. Deletes the folder. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder cannot be deleted (it is either a namespace or the Inbox). The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously delete the folder. Asynchronously deletes the folder. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder cannot be deleted (it is either a namespace or the Inbox). The does not exist. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Subscribe to the folder. Subscribes to the folder. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously subscribe to the folder. Asynchronously subscribes to the folder. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Unsubscribe from the folder. Unsubscribes from the folder. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously unsubscribe from the folder. Asynchronously unsubscribes from the folder. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the subfolders. Gets the subfolders as well as queries the server for the status of the requested items. When the argument is non-empty, this has the equivalent functionality of calling and then calling on each of the returned folders. The subfolders. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the subfolders. Asynchronously gets the subfolders as well as queries the server for the status of the requested items. When the argument is non-empty, this has the equivalent functionality of calling and then calling on each of the returned folders. The subfolders. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the subfolders. Gets the subfolders. The subfolders. If set to , only subscribed folders will be listed. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the subfolders. Asynchronously gets the subfolders. The subfolders. If set to , only subscribed folders will be listed. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified subfolder. Gets the specified subfolder. The subfolder. The name of the subfolder. The cancellation token. is . is either an empty string or contains the . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The requested folder could not be found. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified subfolder. Asynchronously gets the specified subfolder. The subfolder. The name of the subfolder. The cancellation token. is . is either an empty string or contains the . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The requested folder could not be found. The server's response contained unexpected tokens. The command failed. Force the server to flush its state for the folder. Forces the server to flush its state for the folder. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously force the server to flush its state for the folder. Asynchronously forces the server to flush its state for the folder. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Update the values of the specified items. Updates the values of the specified items. The method MUST NOT be used on a folder that is already in the opened state. Instead, other ways of getting the desired information should be used. For example, a common use for the method is to get the number of unread messages in the folder. When the folder is open, however, it is possible to use the method to query for the list of unread messages. The items to update. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The does not exist. The mail store does not support the STATUS command. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously update the values of the specified items. Updates the values of the specified items. The method MUST NOT be used on a folder that is already in the opened state. Instead, other ways of getting the desired information should be used. For example, a common use for the method is to get the number of unread messages in the folder. When the folder is open, however, it is possible to use the method to query for the list of unread messages. An asynchronous task context. The items to update. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support the STATUS command. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the complete access control list for the folder. Gets the complete access control list for the folder. The access control list. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the complete access control list for the folder. Asynchronously gets the complete access control list for the folder. The access control list. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the access rights for a particular identifier. Gets the access rights for a particular identifier. The access rights. The identifier name. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the access rights for a particular identifier. Asynchronously gets the access rights for a particular identifier. The access rights. The identifier name. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the access rights for the current authenticated user. Gets the access rights for the current authenticated user. The access rights. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the access rights for the current authenticated user. Asynchronously gets the access rights for the current authenticated user. The access rights. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Add access rights for the specified identity. Adds the given access rights for the specified identity. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously add access rights for the specified identity. Asynchronously adds the given access rights for the specified identity. An asynchronous task context. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove access rights for the specified identity. Removes the given access rights for the specified identity. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove access rights for the specified identity. Asynchronously removes the given access rights for the specified identity. An asynchronous task context. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the access rights for the specified identity. Sets the access rights for the specified identity. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the access rights for the specified identity. Asynchronously sets the access rights for the specified identity. An asynchronous task context. The identity name. The access rights. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Remove all access rights for the given identity. Removes all access rights for the given identity. The identity name. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously remove all access rights for the given identity. Asynchronously removes all access rights for the given identity. An asynchronous task context. The identity name. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The mail store does not support the ACL extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the quota information for the folder. Gets the quota information for the folder. To determine if a quotas are supported, check the property. The folder quota. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support quotas. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the quota information for the folder. Asynchronously gets the quota information for the folder. To determine if a quotas are supported, check the property. The folder quota. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support quotas. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Set the quota limits for the folder. Sets the quota limits for the folder. To determine if a quotas are supported, check the property. The updated folder quota. If not , sets the maximum number of messages to allow. If not , sets the maximum storage size (in kilobytes). The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support quotas. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously set the quota limits for the folder. Asynchronously sets the quota limits for the folder. To determine if a quotas are supported, check the property. The updated folder quota. If not , sets the maximum number of messages to allow. If not , sets the maximum storage size (in kilobytes). The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail store does not support quotas. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified metadata. Gets the specified metadata. The requested metadata value. The metadata tag. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously gets the specified metadata. Asynchronously gets the specified metadata. The requested metadata value. The metadata tag. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified metadata. Gets the specified metadata. The requested metadata. The metadata tags. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously gets the specified metadata. Asynchronously gets the specified metadata. The requested metadata. The metadata tags. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified metadata. Gets the specified metadata. The requested metadata. The metadata options. The metadata tags. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously gets the specified metadata. Asynchronously gets the specified metadata. The requested metadata. The metadata options. The metadata tags. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Sets the specified metadata. Sets the specified metadata. The metadata. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously sets the specified metadata. Asynchronously sets the specified metadata. An asynchronous task context. The metadata. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Expunge the folder, permanently removing all messages marked for deletion. Expunges the folder, permanently removing all messages marked for deletion. Normally, an event will be emitted for each message that is expunged. However, if the mail store supports the quick resynchronization feature and it has been enabled via the method, then the event will be emitted rather than the event. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously expunge the folder, permanently removing all messages marked for deletion. Asynchronously expunges the folder, permanently removing all messages marked for deletion. Normally, an event will be emitted for each message that is expunged. However, if the mail store supports the quick resynchronization feature and it has been enabled via the method, then the event will be emitted rather than the event. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Expunge the specified uids, permanently removing them from the folder. Expunges the specified uids, permanently removing them from the folder. Normally, an event will be emitted for each message that is expunged. However, if the mail store supports the quick resynchronization feature and it has been enabled via the method, then the event will be emitted rather than the event. The message uids. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously expunge the specified uids, permanently removing them from the folder. Asynchronously expunges the specified uids, permanently removing them from the folder. Normally, an event will be emitted for each message that is expunged. However, if the mail store supports the quick resynchronization feature and it has been enabled via the method, then the event will be emitted rather than the event. An asynchronous task context. The message uids. The cancellation token. is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append a message to the folder. Appends a message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The append request. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- The request included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append a message to the folder. Asynchronously appends a message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The append request. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- The request included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append a message to the folder. Appends a message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The formatting options. The append request. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- The request included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append a message to the folder. Asynchronously appends a message to the folder and returns the UniqueId assigned to the message. The UID of the appended message, if available; otherwise, . The formatting options. The append request. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- The request included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append multiple messages to the folder. Appends multiple messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The append requests. The cancellation token. is . One or more of the is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- One ore more requests included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append multiple messages to the folder. Asynchronously appends multiple messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The append requests. The cancellation token. is . One or more of the is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- One ore more requests included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Append multiple messages to the folder. Appends multiple messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The formatting options. The append requests. The cancellation token. is . -or- is . One or more of the is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- One ore more requests included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously append multiple messages to the folder. Asynchronously appends multiple messages to the folder and returns the UniqueIds assigned to the messages. The UIDs of the appended messages, if available; otherwise an empty array. The formatting options. The append requests. The cancellation token. is . -or- is . One or more of the is . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. -or- One ore more requests included annotations but the folder does not support annotations. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Replace a message in the folder. Replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The UID of the message to be replaced. The replace request. The cancellation token. is . is invalid. -or- The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the appended message, if available; otherwise, . The UID of the message to be replaced. The replace request. The cancellation token. is . is invalid. -or- The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The formatting options. The UID of the message to be replaced. The replace request. The cancellation token. is . -or- is . is invalid. -or- The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The formatting options. The UID of the message to be replaced. The replace request. The cancellation token. is . -or- is . is invalid. -or- The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The index of the message to be replaced. The replace request. The cancellation token. is . is out of range. The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the appended message, if available; otherwise, . The index of the message to be replaced. The replace request. The cancellation token. is . is out of range. The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Replace a message in the folder. Replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The formatting options. The index of the message to be replaced. The replace request. The cancellation token. is . -or- is . is out of range. The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Asynchronously replace a message in the folder. Asynchronously replaces a message in the folder and returns the UniqueId assigned to the new message. The UID of the new message, if available; otherwise, . The formatting options. The index of the message to be replaced. The replace request. The cancellation token. is . -or- is . is out of range. The destination folder does not belong to this . The has been disposed. The is not connected. The is not authenticated. Internationalized formatting was requested but has not been enabled. The does not exist. The is not currently open in read-write mode. The operation was canceled via the cancellation token. Internationalized formatting was requested but is not supported by the server. An I/O error occurred. The server's response contained unexpected tokens. The server replied with a NO or BAD response. Copy the specified message to the destination folder. Copies the specified message to the destination folder. The UID of the message in the destination folder, if available; otherwise, . The UID of the message to copy. The destination folder. The cancellation token. is . is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously copy the specified message to the destination folder. Asynchronously copies the specified message to the destination folder. The UID of the message in the destination folder, if available; otherwise, . The UID of the message to copy. The destination folder. The cancellation token. is . is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Copy the specified messages to the destination folder. Copies the specified messages to the destination folder. The UID mapping of the messages in the destination folder, if available; otherwise an empty mapping. The UIDs of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously copy the specified messages to the destination folder. Asynchronously copies the specified messages to the destination folder. The UID mapping of the messages in the destination folder, if available; otherwise an empty mapping. The UIDs of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Move the specified message to the destination folder. Moves the specified message to the destination folder. The UID of the message in the destination folder, if available; otherwise, . The UID of the message to move. The destination folder. The cancellation token. is . is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously move the specified message to the destination folder. Asynchronously moves the specified message to the destination folder. The UID of the message in the destination folder, if available; otherwise, . The UID of the message to move. The destination folder. The cancellation token. is . is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Move the specified messages to the destination folder. Moves the specified messages to the destination folder. The UID mapping of the messages in the destination folder, if available; otherwise an empty mapping. The UIDs of the messages to move. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously move the specified messages to the destination folder. Asynchronously moves the specified messages to the destination folder. The UID mapping of the messages in the destination folder, if available; otherwise an empty mapping. The UIDs of the messages to move. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The mail store does not support the UIDPLUS extension. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Copy the specified message to the destination folder. Copies the specified message to the destination folder. The index of the message to copy. The destination folder. The cancellation token. is . does not refer to a valid message index. The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously copy the specified message to the destination folder. Asynchronously copies the specified message to the destination folder. An asynchronous task context. The indexes of the message to copy. The destination folder. The cancellation token. is . does not refer to a valid message index. The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Copy the specified messages to the destination folder. Copies the specified messages to the destination folder. The indexes of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously copy the specified messages to the destination folder. Asynchronously copies the specified messages to the destination folder. An asynchronous task context. The indexes of the messages to copy. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Move the specified message to the destination folder. Moves the specified message to the destination folder. The index of the message to move. The destination folder. The cancellation token. is . does not refer to a valid message index. The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously move the specified message to the destination folder. Asynchronously moves the specified message to the destination folder. An asynchronous task context. The index of the message to move. The destination folder. The cancellation token. is . does not refer to a valid message index. The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Move the specified messages to the destination folder. Moves the specified messages to the destination folder. The indexes of the messages to move. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously move the specified messages to the destination folder. Asynchronously moves the specified messages to the destination folder. An asynchronous task context. The indexes of the messages to move. The destination folder. The cancellation token. is . -or- is . One or more of the is invalid. -or- The destination folder does not belong to the . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message UIDs. Fetches the message summaries for the specified message UIDs. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The UIDs. The fetch request. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message UIDs. Asynchronously fetches the message summaries for the specified message UIDs. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The UIDs. The fetch request. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the specified message indexes. Fetches the message summaries for the specified message indexes. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The indexes. The fetch request. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the specified message indexes. Asynchronously fetches the message summaries for the specified message indexes. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The indexes. The fetch request. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Fetch the message summaries for the messages between the two indexes, inclusive. Fetches the message summaries for the messages between the two indexes, inclusive. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The minimum index. The maximum index, or -1 to specify no upper bound. The fetch request. The cancellation token. is . is out of range. -or- is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously fetch the message summaries for the messages between the two indexes, inclusive. Asynchronously fetches the message summaries for the messages between the two indexes, inclusive. It should be noted that if another client has modified any message in the folder, the mail service may choose to return information that was not explicitly requested. It is therefore important to be prepared to handle both additional fields on a for messages that were requested as well as summaries for messages that were not requested at all. An enumeration of summaries for the requested messages. The minimum index. The maximum index, or -1 to specify no upper bound. The fetch request. The cancellation token. is . is out of range. -or- is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified message headers. Gets the specified message headers. The message headers. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified message headers. Asynchronously gets the specified message headers. The message headers. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified body part headers. Gets the specified body part headers. The body part headers. The UID of the message. The body part. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified body part headers. Asynchronously gets the specified body part headers. The body part headers. The UID of the message. The body part. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified message headers. Gets the specified message headers. The message headers. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified message headers. Asynchronously gets the specified message headers. The message headers. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified body part headers. Gets the specified body part headers. The body part headers. The index of the message. The body part. The cancellation token. The progress reporting mechanism. is out of range. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified body part headers. Asynchronously gets the specified body part headers. The body part headers. The index of the message. The body part. The cancellation token. The progress reporting mechanism. is out of range. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested body part headers. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified message. Gets the specified message. The message. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified message. Asynchronously gets the specified message. The message. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified message. Gets the specified message. The message. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified message. Asynchronously gets the specified message. The message. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified body part. Gets the specified body part. The body part. The UID of the message. The body part. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified body part. Asynchronously gets the specified body part. The body part. The UID of the message. The body part. The cancellation token. The progress reporting mechanism. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get the specified body part. Gets the specified body part. The body part. The index of the message. The body part. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get the specified body part. Asynchronously gets the specified body part. The body part. The index of the message. The body part. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message body. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a message stream. Gets a message stream. The message stream. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a message stream. Asynchronously gets a message stream. The message stream. The UID of the message. The cancellation token. The progress reporting mechanism. is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a message stream. Gets a message stream. The message stream. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a message stream. Asynchronously gets a message stream. The message stream. The index of the message. The cancellation token. The progress reporting mechanism. is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified message. Gets a substream of the message. If the starting offset is beyond the end of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the message, a truncated stream will be returned. The stream. The UID of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified message. Asynchronously gets a substream of the message. If the starting offset is beyond the end of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the message, a truncated stream will be returned. The stream. The UID of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified message. Gets a substream of the message. If the starting offset is beyond the end of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the message, a truncated stream will be returned. The stream. The index of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified message. Asynchronously gets a substream of the message. If the starting offset is beyond the end of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the message, a truncated stream will be returned. The stream. The index of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a body part as a stream. Gets a body part as a stream. The body part stream. The UID of the message. The desired body part. The cancellation token. The progress reporting mechanism. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a body part as a stream. Asynchronously gets a body part as a stream. The body part stream. The UID of the message. The desired body part. The cancellation token. The progress reporting mechanism. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a body part as a stream. Gets a body part as a stream. The body part stream. The index of the message. The desired body part. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a body part as a stream. Asynchronously gets a body part as a stream. The body part stream. The index of the message. The desired body part. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified body part. Gets a substream of the body part. If the starting offset is beyond the end of the body part, an empty stream is returned. If the number of bytes desired extends beyond the end of the body part, a truncated stream will be returned. The stream. The UID of the message. The desired body part. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is . is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified body part. Asynchronously gets a substream of the body part. If the starting offset is beyond the end of the body part, an empty stream is returned. If the number of bytes desired extends beyond the end of the body part, a truncated stream will be returned. The stream. The UID of the message. The desired body part. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is . is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified body part. Gets a substream of the body part. If the starting offset is beyond the end of the body part, an empty stream is returned. If the number of bytes desired extends beyond the end of the body part, a truncated stream will be returned. The stream. The index of the message. The desired body part. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is . is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified body part. Asynchronously gets a substream of the body part. If the starting offset is beyond the end of the body part, an empty stream is returned. If the number of bytes desired extends beyond the end of the body part, a truncated stream will be returned. The stream. The index of the message. The desired body part. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is . is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified message. Gets a substream of the specified message. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The UID of the message. The desired section of the message. The cancellation token. The progress reporting mechanism. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified message. Asynchronously gets a substream of the specified message. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The UID of the message. The desired section of the message. The cancellation token. The progress reporting mechanism. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified message. Gets a substream of the specified message. If the starting offset is beyond the end of the specified section of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the section, a truncated stream will be returned. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The UID of the message. The desired section of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is . is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified message. Asynchronously gets a substream of the specified message. If the starting offset is beyond the end of the specified section of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the section, a truncated stream will be returned. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The UID of the message. The desired section of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is invalid. is . is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified message. Gets a substream of the specified message. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The index of the message. The desired section of the message. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified body part. Asynchronously gets a substream of the specified message. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The index of the message. The desired section of the message. The cancellation token. The progress reporting mechanism. is . is out of range. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Get a substream of the specified message. Gets a substream of the specified message. If the starting offset is beyond the end of the specified section of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the section, a truncated stream will be returned. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The index of the message. The desired section of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is . is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously get a substream of the specified body part. Asynchronously gets a substream of the specified message. If the starting offset is beyond the end of the specified section of the message, an empty stream is returned. If the number of bytes desired extends beyond the end of the section, a truncated stream will be returned. For more information about how to construct the , see Section 6.4.5 of RFC3501. The stream. The index of the message. The desired section of the message. The starting offset of the first desired byte. The number of bytes desired. The cancellation token. The progress reporting mechanism. is . is out of range. -or- is negative. -or- is negative. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The did not return the requested message stream. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store message flags and keywords for a message. Updates the message flags and keywords for a message. if the store operation was successful; otherwise, . The UID of the message. The message flags and keywords to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store message flags and keywords for a message. Asynchronously updates the message flags and keywords for a message. if the store operation was successful; otherwise, . The UID of the message. The message flags and keywords to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store message flags and keywords for a set of messages. Updates the message flags and keywords for a set of messages. The UIDs of the messages that were not updated. The message UIDs. The message flags and keywords to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store message flags and keywords for a set of messages. Asynchronously updates the message flags and keywords for a set of messages. The UIDs of the messages that were not updated. The message UIDs. The message flags and keywords to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store message flags and keywords for a message. Updates the message flags and keywords for a message. if the store operation was successful; otherwise, . The index of the message. The message flags and keywords to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store message flags and keywords for a message. Asynchronously updates the message flags and keywords for a message. if the store operation was successful; otherwise, . The index of the message. The message flags and keywords to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store message flags and keywords for a set of messages. Updates the message flags and keywords for a set of messages. The indexes of the messages that were not updated. The message indexes. The message flags and keywords to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store message flags and keywords for a set of messages. Asynchronously updates the message flags and keywords for a set of messages. The indexes of the messages that were not updated. The message indexes. The message flags and keywords to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store GMail-style labels for a message. Updates the GMail-style labels for a message. if the store operation was successful; otherwise, . The UID of the message. The GMail-style labels to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store GMail-style labels for a message. Asynchronously updates the GMail-style labels for a message. if the store operation was successful; otherwise, . The UID of the message. The GMail-style labels to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store GMail-style labels for a set of messages. Updates the GMail-style labels for a set of messages. The UIDs of the messages that were not updated. The message UIDs. The GMail-style labels to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store GMail-style labels for a set of messages. Asynchronously updates the GMail-style labels for a set of messages. The UIDs of the messages that were not updated. The message UIDs. The GMail-style labels to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store GMail-style labels for a message. Updates the GMail-style labels for a message. if the store operation was successful; otherwise, . The index of the message. The GMail-style labels to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store GMail-style labels for a message. Asynchronously updates the GMail-style labels for a message. if the store operation was successful; otherwise, . The index of the message. The GMail-style labels to store. The cancellation token. is invalid. is . The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store GMail-style labels for a set of messages. Updates the GMail-style labels for a set of messages. The indexes of the messages that were not updated. The message indexes. The GMail-style labels to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store GMail-style labels for a set of messages. Asynchronously updates the GMail-style labels for a set of messages. The indexes of the messages that were not updated. The message indexes. The GMail-style labels to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open in read-write mode. The folder does not support storing labels. -or- The specified an value but the folder does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store the annotations for the specified message. Stores the annotations for the specified message. The UID of the message. The annotations to store. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store the annotations for the specified message. Asynchronously stores the annotations for the specified message. An asynchronous task context. The UID of the message. The annotations to store. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store the annotations for the specified messages. Stores the annotations for the specified messages. The UIDs of the messages. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store the annotations for the specified messages. Asynchronously stores the annotations for the specified messages. An asynchronous task context. The UIDs of the messages. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store the annotations for the specified messages only if their mod-sequence value is less than the specified value. Stores the annotations for the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The UIDs of the messages. The mod-sequence value. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. -or- The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store the annotations for the specified messages only if their mod-sequence value is less than the specified value. Asynchronously stores the annotations for the specified messages only if their mod-sequence value is less than the specified value. The unique IDs of the messages that were not updated. The UIDs of the messages. The mod-sequence value. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. -or- The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store the annotations for the specified message. Stores the annotations for the specified message. The index of the message. The annotations to store. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store the annotations for the specified message. Asynchronously stores the annotations for the specified message. An asynchronous task context. The indexes of the message. The annotations to store. The cancellation token. is . is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store the annotations for the specified messages. Stores the annotations for the specified messages. The indexes of the messages. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store the annotations for the specified messages. Asynchronously stores the annotations for the specified messages. An asynchronous task context. The indexes of the messages. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Store the annotations for the specified messages only if their mod-sequence value is less than the specified value. Stores the annotations for the specified messages only if their mod-sequence value is less than the specified value. The indexes of the messages that were not updated. The indexes of the messages. The mod-sequence value. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. -or- The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously store the annotations for the specified messages only if their mod-sequence value is less than the specified value. Asynchronously stores the annotations for the specified messages only if their mod-sequence value is less than the specified value.s The indexes of the messages that were not updated. The indexes of the messages. The mod-sequence value. The annotations to store. The cancellation token. is . -or- is . One or more of the is invalid. The has been disposed. The is not connected. The is not authenticated. The is not currently open in read-write mode. Cannot store annotations without any properties defined. The does not support annotations. -or- The does not support mod-sequences. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Search the folder for messages matching the specified query. The returned array of unique identifiers can be used with methods such as . An array of matching UIDs. The search query. The cancellation token. is . One or more search terms in the are not supported by the mail store. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously search the folder for messages matching the specified query. The returned array of unique identifiers can be used with methods such as . An array of matching UIDs. The search query. The cancellation token. is . One or more search terms in the are not supported by the mail store. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Search the subset of UIDs in the folder for messages matching the specified query. The returned array of unique identifiers can be used with methods such as . An array of matching UIDs in the specified sort order. The subset of UIDs The search query. The cancellation token. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported by the mail store. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously search the subset of UIDs in the folder for messages matching the specified query. The returned array of unique identifiers can be used with methods such as . An array of matching UIDs in the specified sort order. The subset of UIDs The search query. The cancellation token. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Search the folder for messages matching the specified query. Searches the folder for messages matching the specified query, returning only the specified search results. The search results. The search options. The search query. The cancellation token. is . One or more search terms in the are not supported. -or- The server does not support the specified search options. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously search the folder for messages matching the specified query. Asynchronously searches the folder for messages matching the specified query, returning only the specified search results. The search results. The search options. The search query. The cancellation token. is . One or more search terms in the are not supported. -or- The server does not support the specified search options. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Search the subset of UIDs in the folder for messages matching the specified query. Searches the subset of UIDs in the folder for messages matching the specified query, returning only the specified search results. The search results. The search options. The subset of UIDs The search query. The cancellation token. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported. -or- The server does not support the specified search options. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously search the subset of UIDs in the folder for messages matching the specified query. Asynchronously searches the subset of UIDs in the folder for messages matching the specified query, returning only the specified search results. The search results. The search options. The subset of UIDs The search query. The cancellation token. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported. -or- The server does not support the specified search options. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Sort messages matching the specified query. The returned array of unique identifiers will be sorted in the preferred order and can be used with . /// An array of matching UIDs in the specified sort order. The search query. The sort order. The cancellation token. is . -or- is . is empty. One or more search terms in the are not supported. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously sort messages matching the specified query. The returned array of unique identifiers will be sorted in the preferred order and can be used with . An array of matching UIDs in the specified sort order. The search query. The sort order. The cancellation token. is . -or- is . is empty. One or more search terms in the are not supported. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Sort messages matching the specified query. The returned array of unique identifiers will be sorted in the preferred order and can be used with . An array of matching UIDs in the specified sort order. The subset of UIDs The search query. The sort order. The cancellation token. is . -or- is . -or- is . is empty. -or- One or more of the is invalid. -or- is empty. One or more search terms in the are not supported. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously sort messages matching the specified query. The returned array of unique identifiers will be sorted in the preferred order and can be used with . An array of matching UIDs in the specified sort order. The subset of UIDs The search query. The sort order. The cancellation token. is . -or- is . -or- is . is empty. -or- One or more of the is invalid. -or- is empty. One or more search terms in the are not supported. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Sort messages matching the specified query. Searches the folder for messages matching the specified query, returning the search results in the specified sort order. The search results. The search options. The search query. The sort order. The cancellation token. is . -or- is . is empty. One or more search terms in the are not supported. -or- The server does not support the specified search options. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously sort messages matching the specified query. Asynchronously searches the folder for messages matching the specified query, returning the search results in the specified sort order. The search results. The search options. The search query. The sort order. The cancellation token. is . -or- is . is empty. One or more search terms in the are not supported. -or- The server does not support the specified search options. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Sort messages matching the specified query. Searches the folder for messages matching the specified query, returning the search results in the specified sort order. The search results. The search options. The subset of UIDs The search query. The sort order. The cancellation token. is . -or- is . -or- is . is empty. -or- One or more of the is invalid. -or- is empty. One or more search terms in the are not supported. -or- The server does not support the specified search options. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously sort messages matching the specified query, returning the search results in the specified sort order. Asynchronously searches the folder for messages matching the specified query, returning the search results in the specified sort order. The search results. The search options. The subset of UIDs The search query. The sort order. The cancellation token. is . -or- is . -or- is . is empty. -or- One or more of the is invalid. -or- is empty. One or more search terms in the are not supported. -or- The server does not support the specified search options. -or- The server does not support sorting search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Thread the messages in the folder that match the search query using the specified threading algorithm. The can be used with methods such as . An array of message threads. The threading algorithm to use. The search query. The cancellation token. is not supported. is . One or more search terms in the are not supported. -or- The server does not support threading search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously thread the messages in the folder that match the search query using the specified threading algorithm. The can be used with methods such as . An array of message threads. The threading algorithm to use. The search query. The cancellation token. is not supported. is . One or more search terms in the are not supported. -or- The server does not support threading search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Thread the messages in the folder that match the search query using the specified threading algorithm. The can be used with methods such as . An array of message threads. The subset of UIDs The threading algorithm to use. The search query. The cancellation token. is not supported. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported. -or- The server does not support threading search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously thread the messages in the folder that match the search query using the specified threading algorithm. The can be used with methods such as . An array of message threads. The subset of UIDs The threading algorithm to use. The search query. The cancellation token. is not supported. is . -or- is . is empty. -or- One or more of the is invalid. One or more search terms in the are not supported. -or- The server does not support threading search results. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Occurs when the folder is opened. The event is emitted when the folder is opened. Raise the opened event. Raises the opened event. Occurs when the folder is closed. The event is emitted when the folder is closed. Raise the closed event. Raises the closed event. Occurs when the folder is deleted. The event is emitted when the folder is deleted. Raise the deleted event. Raises the deleted event. Occurs when the folder is renamed. The event is emitted when the folder is renamed. Raise the renamed event. Raises the renamed event. The old name of the folder. The new name of the folder. Notifies the folder that a parent folder has been renamed. implementations should override this method to update their state (such as updating their property). Occurs when the folder is subscribed. The event is emitted when the folder is subscribed. Raise the subscribed event. Raises the subscribed event. Occurs when the folder is unsubscribed. The event is emitted when the folder is unsubscribed. Raise the unsubscribed event. Raises the unsubscribed event. Occurs when a message is expunged from the folder. The event is emitted when a message is expunged from the folder. Raise the message expunged event. Raises the message expunged event. The message expunged event args. Occurs when a message vanishes from the folder. The event is emitted when messages vanish from the folder. Raise the messages vanished event. Raises the messages vanished event. The messages vanished event args. Occurs when flags changed on a message. The event is emitted when the flags for a message are changed. Raise the message flags changed event. Raises the message flags changed event. The message flags changed event args. Occurs when labels changed on a message. The event is emitted when the labels for a message are changed. Raise the message labels changed event. Raises the message labels changed event. The message labels changed event args. Occurs when annotations changed on a message. The event is emitted when the annotations for a message are changed. Raise the message annotations changed event. Raises the message annotations changed event. The message annotations changed event args. Occurs when a message summary is fetched from the folder. Emitted when a message summary is fetched from the folder. When multiple message summaries are being fetched from a remote folder, it is possible that the connection will drop or some other exception will occur, causing the Fetch method to fail and lose all of the data that has been downloaded up to that point, requiring the client to request the same set of message summaries all over again after it reconnects. This is obviously inefficient. To alleviate this potential problem, this event will be emitted as soon as the successfully parses each untagged FETCH response from the server, allowing the client to commit this data immediately to its local cache. Depending on the IMAP server, it is possible that the event will be emitted for the same message multiple times if the IMAP server happens to split the requested fields into multiple untagged FETCH responses. Use the property to determine which f properties have been populated. Raise the message summary fetched event. Raises the message summary fetched event. When multiple message summaries are being fetched from a remote folder, it is possible that the connection will drop or some other exception will occur, causing the Fetch method to fail and lose all of the data that has been downloaded up to that point, requiring the client to request the same set of message summaries all over again after it reconnects. This is obviously inefficient. To alleviate this potential problem, this event will be emitted as soon as the successfully parses each untagged FETCH response from the server, allowing the client to commit this data immediately to its local cache. Depending on the IMAP server, it is possible that will be invoked for the same message multiple times if the IMAP server happens to split the requested fields into multiple untagged FETCH responses. Use the property to determine which f properties have been populated. The message summary. Occurs when metadata changes. The event is emitted when metadata changes. Raise the metadata changed event. Raises the metadata changed event. The metadata that changed. Occurs when the mod-sequence changed on a message. The event is emitted when the mod-sequence for a message is changed. Raise the message mod-sequence changed event. Raises the message mod-sequence changed event. The mod-sequence changed event args. Occurs when the highest mod-sequence changes. The event is emitted whenever the value changes. Raise the highest mod-sequence changed event. Raises the highest mod-sequence changed event. Occurs when the next UID changes. The event is emitted whenever the value changes. Raise the next UID changed event. Raises the next UID changed event. Occurs when the UID validity changes. The event is emitted whenever the value changes. Raise the uid validity changed event. Raises the uid validity changed event. Occurs when the folder ID changes. The event is emitted whenever the value changes. Raise the ID changed event. Raises the ID changed event. Occurs when the folder size changes. The event is emitted whenever the value changes. Raise the size changed event. Raises the size changed event. Occurs when the message count changes. The event is emitted whenever the value changes. Raise the message count changed event. Raises the message count changed event. Occurs when the recent message count changes. The event is emitted whenever the value changes. Raise the recent message count changed event. Raises the recent message count changed event. Occurs when the unread message count changes. The event is emitted whenever the value changes. Raise the unread message count changed event. Raises the unread message count changed event. Get an enumerator for the messages in the folder. Gets an enumerator for the messages in the folder. The enumerator. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. Get an enumerator for the messages in the folder. Gets an enumerator for the messages in the folder. The enumerator. The has been disposed. The is not connected. The is not authenticated. The folder is not currently open. Returns a that represents the current . Returns a that represents the current . A that represents the current . An abstract mail service implementation. An abstract mail service implementation. Initializes a new instance of the class. Initializes a new instance of the class. The protocol logger. is . Initializes a new instance of the class. Initializes a new instance of the class. Releases unmanaged resources and performs other cleanup operations before the is reclaimed by garbage collection. Releases unmanaged resources and performs other cleanup operations before the is reclaimed by garbage collection. Get an object that can be used to synchronize access to the service. Gets an object that can be used to synchronize access to the service. The sync root. Get the protocol supported by the message service. Gets the protocol supported by the message service. The protocol. Get the protocol logger. Gets the protocol logger. The protocol logger. Get or set the set of enabled SSL and/or TLS protocol versions that the client is allowed to use. Gets or sets the enabled SSL and/or TLS protocol versions that the client is allowed to use. By default, MailKit initializes this value to which allows the operating system to choose the best protocol to use and to block protocols that are not secure. This property should be set before calling any of the Connect or ConnectAsync methods. The SSL and TLS protocol versions that are enabled. Get or set the client SSL certificates. Some servers may require the client SSL certificates in order to allow the user to connect. This property should be set before calling any of the Connect or ConnectAsync methods. The client SSL certificates. Get or set whether connecting via SSL/TLS should check certificate revocation. Gets or sets whether connecting via SSL/TLS should check certificate revocation. Normally, the value of this property should be set to (the default) for security reasons, but there are times when it may be necessary to set it to . For example, most Certificate Authorities are probably pretty good at keeping their CRL and/or OCSP servers up 24/7, but occasionally they do go down or are otherwise unreachable due to other network problems between the client and the Certificate Authority. When this happens, it becomes impossible to check the revocation status of one or more of the certificates in the chain resulting in an being thrown in the Connect method. If this becomes a problem, it may become desirable to set to . if certificate revocation should be checked; otherwise, . Get or set a callback function to validate the server certificate. Gets or sets a callback function to validate the server certificate. This property should be set before calling any of the Connect or ConnectAsync methods. The server certificate validation callback function. Get or set the local IP end point to use when connecting to the remote host. Gets or sets the local IP end point to use when connecting to the remote host. The local IP end point or to use the default end point. Get or set the proxy client to use when connecting to a remote host. Gets or sets the proxy client to use when connecting to a remote host via any of the Connect methods. The proxy client. Gets the authentication mechanisms supported by the mail server. The authentication mechanisms are queried as part of the Connect method. The authentication mechanisms. Gets whether or not the client is currently connected to an mail server. The state is set to immediately after one of the Connect methods succeeds and is not set back to until either the client is disconnected via or until a is thrown while attempting to read or write to the underlying network socket. When an is caught, the connection state of the should be checked before continuing. if the client is connected; otherwise, . Get whether or not the connection is secure (typically via SSL or TLS). Gets whether or not the connection is secure (typically via SSL or TLS). if the connection is secure; otherwise, . Get whether or not the connection is encrypted (typically via SSL or TLS). Gets whether or not the connection is encrypted (typically via SSL or TLS). if the connection is encrypted; otherwise, . Get whether or not the connection is signed (typically via SSL or TLS). Gets whether or not the connection is signed (typically via SSL or TLS). if the connection is signed; otherwise, . Get the negotiated SSL or TLS protocol version. Gets the negotiated SSL or TLS protocol version once an SSL or TLS connection has been made. The negotiated SSL or TLS protocol version. Get the negotiated SSL or TLS cipher algorithm. Gets the negotiated SSL or TLS cipher algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS cipher algorithm. Get the negotiated SSL or TLS cipher algorithm strength. Gets the negotiated SSL or TLS cipher algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS cipher algorithm strength. Get the negotiated SSL or TLS hash algorithm. Gets the negotiated SSL or TLS hash algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS hash algorithm. Get the negotiated SSL or TLS hash algorithm strength. Gets the negotiated SSL or TLS hash algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS hash algorithm strength. Get the negotiated SSL or TLS key exchange algorithm. Gets the negotiated SSL or TLS key exchange algorithm once an SSL or TLS connection has been made. The negotiated SSL or TLS key exchange algorithm. Get the negotiated SSL or TLS key exchange algorithm strength. Gets the negotiated SSL or TLS key exchange algorithm strength once an SSL or TLS connection has been made. The negotiated SSL or TLS key exchange algorithm strength. Get whether or not the client is currently authenticated with the mail server. Gets whether or not the client is currently authenticated with the mail server. To authenticate with the mail server, use one of the Authenticate methods or any of the Async alternatives. if the client is authenticated; otherwise, . Gets or sets the timeout for network streaming operations, in milliseconds. Gets or sets the underlying socket stream's and values. The timeout in milliseconds. The default server certificate validation callback used when connecting via SSL or TLS. The default server certificate validation callback recognizes and accepts the certificates for a list of commonly used mail servers such as gmail.com, outlook.com, mail.me.com, yahoo.com, and gmx.net. if the certificate is deemed valid; otherwise, . The object that is connecting via SSL or TLS. The server's SSL certificate. The server's SSL certificate chain. The SSL policy errors. Establish a connection to the specified mail server. Establishes a connection to the specified mail server. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. A protocol error occurred. Asynchronously establish a connection to the specified mail server. Asynchronously establishes a connection to the specified mail server. An asynchronous task context. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . is not between 0 and 65535. The is a zero-length string. The has been disposed. The is already connected. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. A protocol error occurred. Establish a connection to the specified mail server using the provided socket. Establish a connection to the specified mail server using the provided socket. If a successful connection is made, the property will be populated. The socket to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. is not connected. -or- The is a zero-length string. The is already connected. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Asynchronously establish a connection to the specified mail server using the provided socket. Asynchronously establishes a connection to the specified mail server using the provided socket. If a successful connection is made, the property will be populated. An asynchronous task context. The socket to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. is not connected. -or- The is a zero-length string. The is already connected. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Establish a connection to the specified mail server using the provided stream. Establish a connection to the specified mail server using the provided stream. If a successful connection is made, the property will be populated. The stream to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. The is a zero-length string. The is already connected. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Asynchronously establish a connection to the specified mail server using the provided stream. Asynchronously establishes a connection to the specified mail server using the provided stream. If a successful connection is made, the property will be populated. An asynchronous task context. The stream to use for the connection. The host name to connect to. The port to connect to. If the specified port is 0, then the default port will be used. The secure socket options to when connecting. The cancellation token. is . -or- is . is not between 0 and 65535. The is a zero-length string. The is already connected. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Establish a connection to the specified mail server. Establishes a connection to the specified mail server. The server URI. The cancellation token. The is . The is not an absolute URI. The has been disposed. The is already connected. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. A protocol error occurred. Asynchronously establish a connection to the specified mail server. Asynchronously establishes a connection to the specified mail server. An asynchronous task context. The server URI. The cancellation token. The is . The is not an absolute URI. The has been disposed. The is already connected. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. A protocol error occurred. Establish a connection to the specified mail server. Establishes a connection to the specified mail server. The argument only controls whether or not the client makes an SSL-wrapped connection. In other words, even if the parameter is , SSL/TLS may still be used if the mail server supports the STARTTLS extension. To disable all use of SSL/TLS, use the overload with a value of SecureSocketOptions.None instead. The host to connect to. The port to connect to. If the specified port is 0, then the default port will be used. if the client should make an SSL-wrapped connection to the server; otherwise, . The cancellation token. The is . is out of range (0 to 65535, inclusive). The is a zero-length string. The has been disposed. The is already connected. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. A protocol error occurred. Asynchronously establish a connection to the specified mail server. Asynchronously establishes a connection to the specified mail server. The argument only controls whether or not the client makes an SSL-wrapped connection. In other words, even if the parameter is , SSL/TLS may still be used if the mail server supports the STARTTLS extension. To disable all use of SSL/TLS, use the overload with a value of SecureSocketOptions.None instead. An asynchronous task context. The host to connect to. The port to connect to. If the specified port is 0, then the default port will be used. if the client should make an SSL-wrapped connection to the server; otherwise, . The cancellation token. The is . is out of range (0 to 65535, inclusive). The is a zero-length string. The has been disposed. The is already connected. The operation was canceled via the cancellation token. A socket error occurred trying to connect to the remote host. An I/O error occurred. A protocol error occurred. Authenticate using the supplied credentials. Authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. The encoding to use for the user's credentials. The user's credentials. The cancellation token. is . -or- is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Asynchronously authenticate using the supplied credentials. Asynchronously authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. An asynchronous task context. The encoding to use for the user's credentials. The user's credentials. The cancellation token. is . -or- is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Authenticate using the supplied credentials. Authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. The user's credentials. The cancellation token. is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Asynchronously authenticate using the supplied credentials. Asynchronously authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. An asynchronous task context. The user's credentials. The cancellation token. is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Authenticate using the specified user name and password. Authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. The encoding to use for the user's credentials. The user name. The password. The cancellation token. is . -or- is . -or- is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Asynchronously authenticate using the specified user name and password. Asynchronously authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. An asynchronous task context. The encoding to use for the user's credentials. The user name. The password. The cancellation token. is . -or- is . -or- is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Authenticate using the specified user name and password. Authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. The user name. The password. The cancellation token. is . -or- is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Asynchronously authenticate using the specified user name and password. Asynchronously authenticates using the supplied credentials. If the server supports one or more SASL authentication mechanisms, then the SASL mechanisms that both the client and server support (not including any OAUTH mechanisms) are tried in order of greatest security to weakest security. Once a SASL authentication mechanism is found that both client and server support, the credentials are used to authenticate. If the server does not support SASL or if no common SASL mechanisms can be found, then the default login command is used as a fallback. To prevent the usage of certain authentication mechanisms, simply remove them from the hash set before calling this method. An asynchronous task context. The user name. The password. The cancellation token. is . -or- is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Authenticate using the specified SASL mechanism. Authenticates using the specified SASL mechanism. For a list of available SASL authentication mechanisms supported by the server, check the property after the service has been connected. The SASL mechanism. The cancellation token. is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Asynchronously authenticate using the specified SASL mechanism. Authenticates using the specified SASL mechanism. For a list of available SASL authentication mechanisms supported by the server, check the property after the service has been connected. An asynchronous task context. The SASL mechanism. The cancellation token. is . The has been disposed. The is not connected or is already authenticated. The operation was canceled via the cancellation token. Authentication using the supplied credentials has failed. A SASL authentication error occurred. An I/O error occurred. A protocol error occurred. Disconnect the service. If is , a logout/quit command will be issued in order to disconnect cleanly. If set to , a logout/quit command will be issued in order to disconnect cleanly. The cancellation token. The has been disposed. Asynchronously disconnect the service. If is , a logout/quit command will be issued in order to disconnect cleanly. An asynchronous task context. If set to , a logout/quit command will be issued in order to disconnect cleanly. The cancellation token. The has been disposed. Ping the mail server to keep the connection alive. Mail servers, if left idle for too long, will automatically drop the connection. The cancellation token. The has been disposed. The is not connected. -or- The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Asynchronously ping the mail server to keep the connection alive. Mail servers, if left idle for too long, will automatically drop the connection. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. -or- The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command was rejected by the mail server. The server responded with an unexpected token. Occurs when the client has been successfully connected. The event is raised when the client successfully connects to the mail server. Raise the connected event. Raises the connected event. The name of the host that the client connected to. The port that the client connected to on the remote host. The SSL/TLS options that were used when connecting. Occurs when the client gets disconnected. The event is raised whenever the client gets disconnected. Raise the disconnected event. Raises the disconnected event. The name of the host that the client was connected to. The port that the client was connected to on the remote host. The SSL/TLS options that were used by the client. if the disconnect was explicitly requested; otherwise, . Occurs when the client has been successfully authenticated. The event is raised whenever the client has been authenticated. Raise the authenticated event. Raises the authenticated event. The notification sent by the server when the client successfully authenticates. Releases the unmanaged resources used by the and optionally releases the managed resources. Releases the unmanaged resources used by the and optionally releases the managed resources. to release both managed and unmanaged resources; to release only the unmanaged resources. Releases all resource used by the object. Call when you are finished using the . The method leaves the in an unusable state. After calling , you must release all references to the so the garbage collector can reclaim the memory that the was occupying. An abstract mail spool implementation. An abstract mail spool implementation. Initializes a new instance of the class. Initializes a new instance of the class. The protocol logger. is . Get the number of messages available in the message spool. Gets the number of messages available in the message spool. Once authenticated, the property will be set to the number of available messages in the spool. The message count. The has been disposed. The is not connected. The is not authenticated. Get whether or not the service supports referencing messages by UIDs. Not all servers support referencing messages by UID, so this property should be checked before using and . If the server does not support UIDs, then all methods that take UID arguments along with and will fail. if supports uids; otherwise, . The has been disposed. The is not connected. The is not authenticated. Get the message count. Gets the message count. The message count. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously get the message count. Asynchronously gets the message count. The message count. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the UID of the message at the specified index. Not all servers support UIDs, so you should first check the property. The message UID. The message index. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The mail spool does not support UIDs. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously get the UID of the message at the specified index. Not all servers support UIDs, so you should first check the property. The message UID. The message index. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The mail spool does not support UIDs. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the full list of available message UIDs. Not all servers support UIDs, so you should first check the property. The message uids. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail spool does not support UIDs. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the full list of available message UIDs. Not all servers support UIDs, so you should first check the property. The message uids. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The mail spool does not support UIDs. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the size of the specified message, in bytes. Gets the size of the specified message, in bytes. The message size, in bytes. The index of the message. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously get the size of the specified message, in bytes. Asynchronously gets the size of the specified message, in bytes. The message size, in bytes. The index of the message. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the sizes for all available messages, in bytes. Gets the sizes for all available messages, in bytes. The message sizes, in bytes. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously get the sizes for all available messages, in bytes. Asynchronously gets the sizes for all available messages, in bytes. The message sizes, in bytes. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the headers for the specified message. Gets the headers for the specified message. The message headers. The index of the message. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously get the headers for the specified message. Asynchronously gets the headers for the specified message. The message headers. The index of the message. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the headers for the specified messages. Gets the headers for the specified messages. The headers for the specified messages. The indexes of the messages. The cancellation token. is . One or more of the are invalid. -or- No indexes were specified. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously get the headers for the specified messages. Asynchronously gets the headers for the specified messages. The headers for the specified messages. The indexes of the messages. The cancellation token. is . One or more of the are invalid. -or- No indexes were specified. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the headers of the messages within the specified range. Gets the headers of the messages within the specified range. The headers of the messages within the specified range. The index of the first message to get. The number of messages to get. The cancellation token. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the headers of the messages within the specified range. Gets the headers of the messages within the specified range. The headers of the messages within the specified range. The index of the first message to get. The number of messages to get. The cancellation token. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the message at the specified index. Gets the message at the specified index. The message. The index of the message. The cancellation token. The progress reporting mechanism. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously get the message at the specified index. Asynchronously gets the message at the specified index. The message. The index of the message. The cancellation token. The progress reporting mechanism. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the messages at the specified indexes. Get the messages at the specified indexes. The messages. The indexes of the messages. The cancellation token. The progress reporting mechanism. is . One or more of the are invalid. -or- No indexes were specified. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously get the messages at the specified indexes. Asynchronously get the messages at the specified indexes. The messages. The indexes of the messages. The cancellation token. The progress reporting mechanism. is . One or more of the are invalid. -or- No indexes were specified. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the messages within the specified range. Gets the messages within the specified range. The messages. The index of the first message to get. The number of messages to get. The cancellation token. The progress reporting mechanism. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously get the messages within the specified range. Asynchronously gets the messages within the specified range. The messages. The index of the first message to get. The number of messages to get. The cancellation token. The progress reporting mechanism. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the message or header stream at the specified index. Gets the message or header stream at the specified index. The message or header stream. The index of the message. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously get the message or header stream at the specified index. Asynchronously gets the message or header stream at the specified index. The message or header stream. The index of the message. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the message or header streams at the specified indexes. Get the message or header streams at the specified indexes. If the mail server supports pipelining, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The message or header streams. The indexes of the messages. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. is . One or more of the are invalid. -or- No indexes were specified. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously get the message or header streams at the specified indexes. Asynchronously get the message or header streams at the specified indexes. The messages. The indexes of the messages. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. is . One or more of the are invalid. -or- No indexes were specified. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get the message or header streams within the specified range. Gets the message or header streams within the specified range. If the mail server supports pipelining, this method will likely be more efficient than using for each message because it will batch the commands to reduce latency. The message or header streams. The index of the first stream to get. The number of streams to get. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously get the message or header streams within the specified range. Asynchronously gets the message or header streams within the specified range. The messages. The index of the first stream to get. The number of streams to get. if only the headers should be retrieved; otherwise, . The cancellation token. The progress reporting mechanism. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Mark the specified message for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The index of the message. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously mark the specified message for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The index of the message. The cancellation token. is not a valid message index. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Mark the specified messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The indexes of the messages. The cancellation token. is . One or more of the are invalid. -or- No indexes were specified. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously mark the specified messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The indexes of the messages. The cancellation token. is . One or more of the are invalid. -or- No indexes were specified. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Mark the specified range of messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The index of the first message to mark for deletion. The number of messages to mark for deletion. The cancellation token. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously mark the specified range of messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The index of the first message to mark for deletion. The number of messages to mark for deletion. The cancellation token. and do not specify a valid range of messages. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Mark all messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously mark all messages for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Reset the state of all messages marked for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Asynchronously reset the state of all messages marked for deletion. Messages marked for deletion are not actually deleted until the session is cleanly disconnected (see ). An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. The command failed. A protocol error occurred. Get an enumerator for the messages in the folder. Gets an enumerator for the messages in the folder. The enumerator. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. A command failed. A protocol error occurred. Get an enumerator for the messages in the folder. Gets an enumerator for the messages in the folder. The enumerator. The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. A command failed. A protocol error occurred. An abstract mail store implementation. An abstract mail store implementation. Initializes a new instance of the class. Initializes a new instance of the class. The protocol logger. is . Gets the personal namespaces. The personal folder namespaces contain a user's personal mailbox folders. The personal namespaces. Gets the shared namespaces. The shared folder namespaces contain mailbox folders that are shared with the user. The shared namespaces. Gets the other namespaces. The other folder namespaces contain other mailbox folders. The other namespaces. Get whether or not the mail store supports quotas. Gets whether or not the mail store supports quotas. if the mail store supports quotas; otherwise, . Get the threading algorithms supported by the mail store. The threading algorithms are queried as part of the Connect and Authenticate methods. The supported threading algorithms. Get the Inbox folder. The Inbox folder is the default folder and always exists on the mail store. This property will only be available after the client has been authenticated. The Inbox folder. Enable the quick resynchronization feature. Enables quick resynchronization when a folder is opened using the method. If this feature is enabled, the event is replaced with the event. This method needs to be called immediately after calling one of the Authenticate methods, before opening any folders. The cancellation token. The has been disposed. The is not connected. The is not authenticated. Quick resynchronization needs to be enabled before selecting a folder. The mail store does not support quick resynchronization. The operation was canceled via the cancellation token. An I/O error occurred. A protocol error occurred. The command failed. Asynchronously enable the quick resynchronization feature. Enables quick resynchronization when a folder is opened using the method. If this feature is enabled, the event is replaced with the event. This method needs to be called immediately after calling one of the Authenticate methods, before opening any folders. An asynchronous task context. The cancellation token. The has been disposed. The is not connected. The is not authenticated. Quick resynchronization needs to be enabled before selecting a folder. The mail store does not support quick resynchronization. The operation was canceled via the cancellation token. An I/O error occurred. A protocol error occurred. The command failed. Get the specified special folder. Not all mail stores support special folders. Each implementation should provide a way to determine if special folders are supported. The folder if available; otherwise . The type of special folder. is out of range. The has been disposed. The is not connected. The is not authenticated. Get the folder for the specified namespace. Gets the folder for the specified namespace. The folder. The namespace. is . The has been disposed. The is not connected. The is not authenticated. The folder could not be found. Get all of the folders within the specified namespace. Gets all of the folders within the specified namespace. The folders. The namespace. If set to , only subscribed folders will be listed. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. A protocol error occurred. The command failed. Asynchronously get all of the folders within the specified namespace. Asynchronously gets all of the folders within the specified namespace. The folders. The namespace. If set to , only subscribed folders will be listed. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. A protocol error occurred. The command failed. Get all of the folders within the specified namespace. Gets all of the folders within the specified namespace. The folders. The namespace. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. A protocol error occurred. The command failed. Asynchronously get all of the folders within the specified namespace. Asynchronously gets all of the folders within the specified namespace. The folders. The namespace. The status items to pre-populate. If set to , only subscribed folders will be listed. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. An I/O error occurred. A protocol error occurred. The command failed. Get the folder for the specified path. Gets the folder for the specified path. The folder. The folder path. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. The folder could not be found. An I/O error occurred. A protocol error occurred. The command failed. Asynchronously get the folder for the specified path. Asynchronously gets the folder for the specified path. The folder. The folder path. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The operation was canceled via the cancellation token. The folder could not be found. An I/O error occurred. A protocol error occurred. The command failed. Gets the specified metadata. Gets the specified metadata. The requested metadata value. The metadata tag. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously gets the specified metadata. Asynchronously gets the specified metadata. The requested metadata value. The metadata tag. The cancellation token. The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Gets the specified metadata. Gets the specified metadata. The requested metadata. The metadata tags. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously gets the specified metadata. Asynchronously gets the specified metadata. The requested metadata. The metadata tags. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Gets the specified metadata. Gets the specified metadata. The requested metadata. The metadata options. The metadata tags. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously gets the specified metadata. Asynchronously gets the specified metadata. The requested metadata. The metadata options. The metadata tags. The cancellation token. is . -or- is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Sets the specified metadata. Sets the specified metadata. The metadata. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Asynchronously sets the specified metadata. Asynchronously sets the specified metadata. An asynchronous task context. The metadata. The cancellation token. is . The has been disposed. The is not connected. The is not authenticated. The folder does not support metadata. The operation was canceled via the cancellation token. An I/O error occurred. The server's response contained unexpected tokens. The command failed. Occurs when a remote message store receives an alert message from the server. The event is raised whenever the mail server sends an alert message. Raise the alert event. Raises the alert event. The alert message. is . Occurs when a folder is created. The event is emitted when a new folder is created. Raise the folder created event. Raises the folder created event. The folder that was just created. Occurs when metadata changes. The event is emitted when metadata changes. Raise the metadata changed event. Raises the metadata changed event. The metadata that changed. An abstract mail transport implementation. An abstract mail transport implementation. Initializes a new instance of the class. Initializes a new instance of the class. The protocol logger. is . Send the specified message. Sends the specified message. The sender address is determined by checking the following message headers (in order of precedence): Resent-Sender, Resent-From, Sender, and From. If either the Resent-Sender or Resent-From addresses are present, the recipients are collected from the Resent-To, Resent-Cc, and Resent-Bcc headers, otherwise the To, Cc, and Bcc headers are used. The final free-form text response from the server. The message. The cancellation token. The progress reporting mechanism. is . The has been disposed. The is not connected. Authentication is required before sending a message. A sender has not been specified. -or- No recipients have been specified. The operation has been canceled. An I/O error occurred. The send command failed. A protocol exception occurred. Asynchronously send the specified message. Asynchronously sends the specified message. The sender address is determined by checking the following message headers (in order of precedence): Resent-Sender, Resent-From, Sender, and From. If either the Resent-Sender or Resent-From addresses are present, the recipients are collected from the Resent-To, Resent-Cc, and Resent-Bcc headers, otherwise the To, Cc, and Bcc headers are used. The final free-form text response from the server. The message. The cancellation token. The progress reporting mechanism. is . The has been disposed. The is not connected. Authentication is required before sending a message. A sender has not been specified. -or- No recipients have been specified. The operation has been canceled. An I/O error occurred. The send command failed. A protocol exception occurred. Send the specified message using the supplied sender and recipients. Sends the specified message using the supplied sender and recipients. The final free-form text response from the server. The message. The mailbox address to use for sending the message. The mailbox addresses that should receive the message. The cancellation token. The progress reporting mechanism. is . -or- is . -or- is . The has been disposed. The is not connected. Authentication is required before sending a message. A sender has not been specified. -or- No recipients have been specified. The operation has been canceled. An I/O error occurred. The send command failed. A protocol exception occurred. Asynchronously send the specified message using the supplied sender and recipients. Asynchronously sends the specified message using the supplied sender and recipients. The final free-form text response from the server. The message. The mailbox address to use for sending the message. The mailbox addresses that should receive the message. The cancellation token. The progress reporting mechanism. is . -or- is . -or- is . The has been disposed. The is not connected. Authentication is required before sending a message. A sender has not been specified. -or- No recipients have been specified. The operation has been canceled. An I/O error occurred. The send command failed. A protocol exception occurred. Send the specified message. Sends the specified message. The sender address is determined by checking the following message headers (in order of precedence): Resent-Sender, Resent-From, Sender, and From. If either the Resent-Sender or Resent-From addresses are present, the recipients are collected from the Resent-To, Resent-Cc, and Resent-Bcc headers, otherwise the To, Cc, and Bcc headers are used. The final free-form text response from the server. The formatting options. The message. The cancellation token. The progress reporting mechanism. is . -or- is . The has been disposed. The is not connected. Authentication is required before sending a message. A sender has not been specified. -or- No recipients have been specified. The operation has been canceled. Internationalized formatting was requested but is not supported by the transport. An I/O error occurred. The send command failed. A protocol exception occurred. Asynchronously send the specified message. Asynchronously sends the specified message. The sender address is determined by checking the following message headers (in order of precedence): Resent-Sender, Resent-From, Sender, and From. If either the Resent-Sender or Resent-From addresses are present, the recipients are collected from the Resent-To, Resent-Cc, and Resent-Bcc headers, otherwise the To, Cc, and Bcc headers are used. The final free-form text response from the server. The formatting options. The message. The cancellation token. The progress reporting mechanism. is . -or- is . The has been disposed. The is not connected. Authentication is required before sending a message. A sender has not been specified. -or- No recipients have been specified. The operation has been canceled. Internationalized formatting was requested but is not supported by the transport. An I/O error occurred. The send command failed. A protocol exception occurred. Send the specified message using the supplied sender and recipients. Sends the specified message using the supplied sender and recipients. The final free-form text response from the server. The formatting options. The message. The mailbox address to use for sending the message. The mailbox addresses that should receive the message. The cancellation token. The progress reporting mechanism. is . -or- is . -or- is . -or- is . The has been disposed. The is not connected. Authentication is required before sending a message. A sender has not been specified. -or- No recipients have been specified. The operation has been canceled. Internationalized formatting was requested but is not supported by the transport. An I/O error occurred. The send command failed. A protocol exception occurred. Asynchronously send the specified message using the supplied sender and recipients. Asynchronously sends the specified message using the supplied sender and recipients. The final free-form text response from the server. The formatting options. The message. The mailbox address to use for sending the message. The mailbox addresses that should receive the message. The cancellation token. The progress reporting mechanism. is . -or- is . -or- is . -or- is . The has been disposed. The is not connected. Authentication is required before sending a message. A sender has not been specified. -or- No recipients have been specified. The operation has been canceled. Internationalized formatting was requested but is not supported by the transport. An I/O error occurred. The send command failed. A protocol exception occurred. Occurs when a message is successfully sent via the transport. The event will be emitted each time a message is successfully sent. Raise the message sent event. Raises the message sent event. The message sent event args. Event args used when the state of a message changes. Event args used when the state of a message changes. Initializes a new instance of the class. Creates a new . The message index. is out of range. Initializes a new instance of the class. Creates a new . The message index. The unique id of the message. is out of range. Gets the index of the message that changed. Gets the index of the message that changed. The index of the message. Gets the unique ID of the message that changed, if available. Gets the unique ID of the message that changed, if available. The unique ID of the message. An enumeration of message flags. An enumeration of message flags. No message flags are set. The message has been read. The message has been answered (replied to). The message has been flagged for importance. The message has been marked for deletion. The message is marked as a draft. The message has just recently arrived in the folder. User-defined flags are allowed by the folder. Event args for the event. Event args for the event. Initializes a new instance of the class. Creates a new . The message index. Initializes a new instance of the class. Creates a new . The message index. The message flags. Initializes a new instance of the class. Creates a new . The message index. The message flags. The user-defined keywords. is . is out of range. Initializes a new instance of the class. Creates a new . The message index. The message flags. The modification sequence value. is out of range. Initializes a new instance of the class. Creates a new . The message index. The message flags. The user-defined keywords. The modification sequence value. is . is out of range. Initializes a new instance of the class. Creates a new . The message index. The unique id of the message. The message flags. is out of range. Initializes a new instance of the class. Creates a new . The message index. The unique id of the message. The message flags. The user-defined keywords. is . is out of range. Initializes a new instance of the class. Creates a new . The message index. The unique id of the message. The message flags. The modification sequence value. is out of range. Initializes a new instance of the class. Creates a new . The message index. The unique id of the message. The message flags. The user-defined message flags. The modification sequence value. is . is out of range. Gets the updated message flags. Gets the updated message flags. The updated message flags. Gets the updated user-defined message flags. Gets the updated user-defined message flags. The updated user-defined message flags. Gets the updated mod-sequence value of the message, if available. Gets the updated mod-sequence value of the message, if available. The mod-sequence value. Event args for the event. Event args for the event. Initializes a new instance of the class. Creates a new . The message index. is out of range. Initializes a new instance of the class. Creates a new . The message index. The message labels. is . is out of range. Initializes a new instance of the class. Creates a new . The message index. The message labels. The modification sequence value. is . is out of range. Initializes a new instance of the class. Creates a new . The message index. The unique id of the message. The message labels. is . is out of range. Initializes a new instance of the class. Creates a new . The message index. The unique id of the message. The message labels. The modification sequence value. is . is out of range. Gets the updated labels. Gets the updated labels. The updated labels. Gets the updated mod-sequence value of the message, if available. Gets the updated mod-sequence value of the message, if available. The mod-sequence value. The exception that is thrown when a message (or body part) could not be found. This exception is thrown by methods such as IMailFolder.GetMessage, IMailFolder.GetBodyPart, or IMailFolder.GetStream when the server's response does not contain the message, body part, or stream data requested. Initializes a new instance of the class. Deserializes a . The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The error message. The inner exception. Initializes a new instance of the class. Creates a new . The error message. Event args used when a message is successfully sent. Event args used when message is successfully sent. Initializes a new instance of the class. Creates a new . The message that was just sent. The response from the server. is . -or- is . Get the message that was just sent. Gets the message that was just sent. The message. Get the server's response. Gets the server's response. The response. Routines for sorting messages. Routines for sorting messages. Sorts the messages by the specified ordering. Sorts the messages by the specified ordering. The sorted messages. The message items must implement the interface. The messages to sort. The sort ordering. is . -or- is . contains one or more items that is missing information needed for sorting. -or- is an empty list. Sorts the messages by the specified ordering. Sorts the messages by the specified ordering. The sorted messages. The message items must implement the interface. The messages to sort. The sort ordering. is . -or- is . contains one or more items that is missing information needed for sorting. -or- is an empty list. A summary of a message. The Fetch and FetchAsync methods return lists of items. The properties of the that will be available depend on the passed to the aforementioned method. Initializes a new instance of the class. Creates a new . The message index. is negative. Initializes a new instance of the class. Creates a new . The folder that the message belongs to. The message index. is . is negative. Get the folder that the message belongs to. Gets the folder that the message belongs to, if available. The folder. Get a bitmask of fields that have been populated. Gets a bitmask of fields that have been populated. The fields that have been populated. Gets the body structure of the message, if available. The body will be one of , , , or . This property will only be set if either the flag or the flag is passed to one of the Fetch or FetchAsync methods. The body structure of the message. Gets the text body part of the message if it exists. Gets the text/plain body part of the message. This property will only be usable if the flag is passed to one of the Fetch or FetchAsync methods. The text body if it exists; otherwise, . Gets the html body part of the message if it exists. Gets the text/html body part of the message. This property will only be usable if the flag is passed to one of the Fetch or FetchAsync methods. The html body if it exists; otherwise, . Gets the body parts of the message. Traverses over the , enumerating all of the objects. This property will only be usable if either the flag or the flag is passed to one of the Fetch or FetchAsync methods. The body parts. Gets the attachments. Traverses over the , enumerating all of the objects that have a Content-Disposition header set to "attachment". This property will only be usable if the flag is passed to one of the Fetch or FetchAsync methods. The attachments. Gets the preview text of the message. The preview text is a short snippet of the beginning of the message text, typically shown in a mail client's message list to provide the user with a sense of what the message is about. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The preview text. Gets the envelope of the message, if available. The envelope of a message contains information such as the date the message was sent, the subject of the message, the sender of the message, who the message was sent to, which message(s) the message may be in reply to, and the message id. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The envelope of the message. Gets the normalized subject. A normalized Subject header value where prefixes such as "Re:", "Re[#]:", etc have been pruned. The normalized subject. Gets whether or not the message is a reply. This value should be based on whether the message subject contained any "Re:" or "Fwd:" prefixes. if the message is a reply; otherwise, . Gets the Date header value. Gets the Date header value. If the Date header is not present, the arrival date is used. If neither are known, is returned. The date. Gets the message flags, if available. Gets the message flags, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The message flags. Gets the user-defined message flags, if available. Gets the user-defined message flags, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The user-defined message flags. Gets the message annotations, if available. Gets the message annotations, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The message annotations. Gets the list of headers, if available. Gets the list of headers, if available. This property will only be set if the used with Fetch or FetchAsync has the flag set on or if the list is non-empty. The list of headers. Gets the internal date of the message (i.e. the "received" date), if available. Gets the internal date of the message (i.e. the "received" date), if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The internal date of the message. Gets the date and time that the message was saved to the current mailbox, if available. Gets the date and time that the message was saved to the current mailbox, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The save date of the message. Gets the size of the message, in bytes, if available. Gets the size of the message, in bytes, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The size of the message. Gets the mod-sequence value for the message, if available. Gets the mod-sequence value for the message, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The mod-sequence value. Gets the message-ids that the message references, if available. Gets the message-ids that the message references, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The references. Get the globally unique identifier for the message, if available. Gets the globally unique identifier of the message, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. This property maps to the EMAILID value defined in the OBJECTID extension. The globally unique message identifier. Get the globally unique thread identifier for the message, if available. Gets the globally unique thread identifier for the message, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. This property maps to the THREADID value defined in the OBJECTID extension. The globally unique thread identifier. Gets the unique identifier of the message, if available. Gets the unique identifier of the message, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The uid of the message. Gets the index of the message. Gets the index of the message. This property is always set. The index of the message. Gets the GMail message identifier, if available. Gets the GMail message identifier, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The GMail message identifier. Gets the GMail thread identifier, if available. Gets the GMail thread identifier, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The GMail thread identifier. Gets the list of GMail labels, if available. Gets the list of GMail labels, if available. This property will only be set if the flag is passed to one of the Fetch or FetchAsync methods. The GMail labels. Event args used when a message summary has been fetched from a folder. Event args used when a message summary has been fetched from a folder. Initializes a new instance of the class. Creates a new The message summary. is . Get the message summary. Gets the message summary. The message summary. A bitfield of fields. are used to specify which properties of should be populated by calls to , , or . Don't fetch any summary items. Fetch the . Fetches all ANNOTATION values as defined in rfc5257. Fetch the . Fetches the BODY value as defined in rfc3501. Unlike , Body will not populate the parameters nor will it populate the , or properties of each body part. This makes Body far less useful than BodyStructure especially when it is desirable to determine whether or not a body part is an attachment. Fetch the (but with more details than ). Fetches the BODYSTRUCTURE value as defined in rfc3501. Unlike , BodyStructure will also populate the parameters as well as the , and properties of each body part. The Content-Disposition information is especially important when trying to determine whether or not a body part is an attachment, for example. Fetch the . Fetches the ENVELOPE value as defined in rfc3501. Fetch the . Fetches the FLAGS value as defined in rfc3501. Fetch the . Fetches the INTERNALDATE value as defined in rfc3501. Fetch the . Fetches the RFC822.SIZE value as defined in rfc3501. Fetch the . Fetches the MODSEQ value as defined in rfc4551. Fetch the . Fetch the . Fetches the UID value as defined in rfc3501. Fetch the . Fetches the EMAILID value as defined in rfc8474. Fetch the . Fetches the THREADID value as defined in rfc8474. Fetch the . Fetches the X-GM-MSGID value as defined in Google's IMAP extensions documentation. Fetch the . Fetches the X-GM-THRID value as defined in Google's IMAP extensions documentation. Fetch the . Fetches the X-GM-LABELS value as defined in Google's IMAP extensions documentation. Fetch the the complete list of for each message. Fetch the . This property can be quite expensive to calculate because it is typically not an item that is cached on the IMAP server. Instead, MailKit must download a hunk of the message body so that it can decode and parse it in order to generate a meaningful text snippet. This usually involves downloading the first 512 bytes for text/plain message bodies and the first 16 kilobytes for text/html message bodies. If a message contains both a text/plain body and a text/html body, then the text/plain content is used in order to reduce network traffic. Fetch the . Fetches the SAVEDATE value as defined in rfc8514. A macro for fetching the , , , and values. This macro maps to the equivalent ALL macro as defined in rfc3501. A macro for fetching the , , and values. This macro maps to the equivalent FAST macro as defined in rfc3501. A macro for fetching the , , , , and values. This macro maps to the equivalent FULL macro as defined in rfc3501. Event args used when a message vanishes from a folder. Event args used when a message vanishes from a folder. Initializes a new instance of the class. Creates a new . The list of unique identifiers. If set to , the messages vanished in the past as opposed to just now. is . Gets the unique identifiers of the messages that vanished. Gets the unique identifiers of the messages that vanished. The unique identifiers. Gets whether the messages vanished in the past as opposed to just now. Gets whether the messages vanished in the past as opposed to just now. if the messages vanished earlier; otherwise, . A message thread. A message thread. Initializes a new instance of the class. Creates a new message thread node. The unique identifier of the message. Initializes a new instance of the class. Creates a new message thread node. The message summary. Gets the message summary, if available. Gets the message summary, if available. This property will only ever be set if the was created by the . s that are created by any of the Thread or ThreadAsync methods will always be . The message summary. Gets the unique identifier of the message. The unique identifier may be if the message is missing from the or from the list of messages provided to the . The unique identifier. Gets the children. Each child represents a reply to the message referenced by . The children. Threads messages according to the algorithms defined in rfc5256. Threads messages according to the algorithms defined in rfc5256. Thread the messages according to the specified threading algorithm. Thread the messages according to the specified threading algorithm. The threaded messages. The messages. The threading algorithm. is . is not a valid threading algorithm. contains one or more items that is missing information needed for threading. Threads the messages according to the specified threading algorithm and sorts the resulting threads by the specified ordering. Threads the messages according to the specified threading algorithm and sorts the resulting threads by the specified ordering. The threaded messages. The messages. The threading algorithm. The requested sort ordering. is . -or- is . is not a valid threading algorithm. contains one or more items that is missing information needed for threading or sorting. -or- is an empty list. Gets the threadable subject. Gets the threadable subject. The threadable subject. The Subject header value. The reply depth. is . A metadata tag and value. A metadata tag and value. Initializes a new instance of the class. Creates a new . The metadata tag. The metadata value. Gets the metadata tag. Gets the metadata tag. The metadata tag. Gets the metadata value. Gets the metadata value. The metadata value. Event args used when a metadata changes. Event args used when a metadata changes. Initializes a new instance of the class. Creates a new . The metadata that changed. is . Get the metadata that changed. Gets the metadata that changed. The metadata. A collection of metadata. A collection of metadata. Initializes a new instance of the class. Creates a new Initializes a new instance of the class. Creates a new . A collection of metadata. A set of options to use when requesting metadata. A set of options to use when requesting metadata. Initializes a new instance of the class. Creates a new set of options to use when requesting metadata. Get or set the depth. When the option is specified, it extends the list of metadata tag values returned by the GetMetadata() call. For each specified in the the GetMetadata() call, the method returns the value of the specified metadata tag (if it exists), plus all metadata tags below the specified entry up to the specified depth. Three values are allowed for : 0 - no entries below the specified metadata tag are returned. 1 - only entries immediately below the specified metadata tag are returned. - all entries below the specified metadata tag are returned. Thus, a depth of 1 for a tag entry of "/a" will match "/a" as well as its children entries (e.g., "/a/b"), but will not match grandchildren entries (e.g., "/a/b/c"). If the Depth option is not specified, this is the same as specifying 0. The depth. is out of range. Get or set the max size of the metadata tags to request. When specified, the property is used to filter the metadata tags returned by the GetMetadata() call to only those with a value shorter than the max size specified. The size of the max. Get the length of the longest metadata value. If the property is specified, once the GetMetadata() call returns, the property will be set to the length of the longest metadata value that exceeded the limit, otherwise a value of 0 will be set. The length of the longest metadata value that exceeded the max size. A metadata tag. A metadata tag. A metadata tag for specifying the contact information for the server administrator. Used to get the contact information of the administrator on a . A metadata tag for private comments. Used to get or set a private comment on a . A metadata tag for shared comments. Used to get or set a shared comment on a or . A metadata tag for specifying the special use of a folder. Used to get or set the special use of a . Initializes a new instance of the struct. Creates a new . The metadata tag identifier. is . is an empty string. Get the metadata tag identifier. Gets the metadata tag identifier. The metadata tag identifier. Determine whether the specified is equal to the current . Determines whether the specified is equal to the current . The to compare with the current . if the specified is equal to the current ; otherwise, . Serves as a hash function for a object. Serves as a hash function for a object. A hash code for this instance that is suitable for use in hashing algorithms and data structures such as a hash table. Returns a that represents the current . Returns a that represents the current . A that represents the current . Event args for the event. Event args for the event. Initializes a new instance of the class. Creates a new . The message index. Initializes a new instance of the class. Creates a new . The message index. The modification sequence value. Initializes a new instance of the class. Creates a new . The message index. The unique id of the message. The modification sequence value. Gets the updated mod-sequence value of the message. Gets the updated mod-sequence value of the message. The mod-sequence value. A protocol logger that does not log to anywhere. By default, the , , and all use a . Initializes a new instance of the class. Creates a new . Get or set the authentication secret detector. Gets or sets the authentication secret detector. The authentication secret detector. Logs a connection to the specified URI. This method does nothing. The URI. Logs a sequence of bytes sent by the client. This method does nothing. The buffer to log. The offset of the first byte to log. The number of bytes to log. is . Logs a sequence of bytes sent by the server. This method does nothing. The buffer to log. The offset of the first byte to log. The number of bytes to log. is . Releases all resource used by the object. Call when you are finished using the . The method leaves the in an unusable state. After calling , you must release all references to the so the garbage collector can reclaim the memory that the was occupying. The exception that is thrown when there is a protocol error. A can be thrown by any of the various client methods in MailKit. Since many protocol exceptions are fatal, it is important to check whether or not the client is still connected using the property when this exception is thrown. Initializes a new instance of the class. Creates a new . The serialization info. The streaming context. Initializes a new instance of the class. Creates a new . The error message. An inner exception. Initializes a new instance of the class. Creates a new . The error message. Initializes a new instance of the class. Creates a new . A default protocol logger for logging the communication between a client and server. A default protocol logger for logging the communication between a client and server. Initializes a new instance of the class. Creates a new to log to a specified file. The file is created if it does not exist. The file name. if the file should be appended to; otherwise, . Defaults to . Initializes a new instance of the class. Creates a new to log to a specified stream. The stream. if the stream should be left open after the protocol logger is disposed. Releases unmanaged resources and performs other cleanup operations before the is reclaimed by garbage collection. Releases unmanaged resources and performs other cleanup operations before the is reclaimed by garbage collection. Get the log stream. Gets the log stream. The log sstream. Get or set the default client prefix to use when creating new instances. Get or set the default client prefix to use when creating new instances. The default client prefix. Get or set the default server prefix to use when creating new instances. Get or set the default server prefix to use when creating new instances. The default server prefix. Get or set the client prefix to use when logging client messages. Gets or sets the client prefix to use when logging client messages. The client prefix. Get or set the server prefix to use when logging server messages. Gets or sets the server prefix to use when logging server messages. The server prefix. Get or set whether or not authentication secrets should be redacted. Gets or sets whether or not authentication secrets should be redacted. if authentication secrets should be redacted; otherwise, . Get or set whether timestamps should be logged. Gets or sets whether or not timestamps should be logged. if timestamps should be logged; otherwise, . Get or set the date and time serialization format that should be used when logging timestamps. Gets or sets the date and time serialization format that should be used when logging timestamps. The date and time serialization format that should be used when logging timestamps. Get or set the authentication secret detector. Gets or sets the authentication secret detector. The authentication secret detector. Logs a connection to the specified URI. Logs a connection to the specified URI. The URI. is . The logger has been disposed. An I/O error occurred. Logs a sequence of bytes sent by the client. Logs a sequence of bytes sent by the client. is called by the upon every successful write operation to its underlying network stream, passing the exact same , , and arguments to the logging function. The buffer to log. The offset of the first byte to log. The number of bytes to log. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The logger has been disposed. An I/O error occurred. Logs a sequence of bytes sent by the server. Logs a sequence of bytes sent by the server. is called by the upon every successful read of its underlying network stream with the exact buffer that was read. The buffer to log. The offset of the first byte to log. The number of bytes to log. is . is less than zero or greater than the length of . -or- The is not large enough to contain bytes starting at the specified . The logger has been disposed. An I/O error occurred. Releases the unmanaged resources used by the and optionally releases the managed resources. Releases the unmanaged resources used by the and optionally releases the managed resources. to release both managed and unmanaged resources; to release only the unmanaged resources. Releases all resource used by the object. Call when you are finished using the . The method leaves the in an unusable state. After calling , you must release all references to the so the garbage collector can reclaim the memory that the was occupying. A request for replacing a message in a folder. A request for replacing a message in a folder. Initializes a new instance of the class. Creates a new . The message. The message flags. is . Initializes a new instance of the class. Creates a new . The message. The message flags. The message keywords. is . -or- is . Initializes a new instance of the class. Creates a new . The message. The message flags. The internal date of the message. is . Initializes a new instance of the class. Creates a new . The message. The message flags. The message keywords. The internal date of the message. is . -or- is . Get or set the folder where the replacement message should be appended. Gets or sets the folder where the replacement message should be appended. If no destination folder is specified, then the replacement message will be appended to the original folder. The destination folder. The exception that is thrown when the is not authenticated. This exception is thrown when an operation on a service could not be completed due to the service not being authenticated. Initializes a new instance of the class. Deserializes a . The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The error message. The inner exception. Initializes a new instance of the class. Creates a new . The error message. Initializes a new instance of the class. Creates a new . The exception that is thrown when the is not connected. This exception is thrown when an operation on a service could not be completed due to the service not being connected. Initializes a new instance of the class. Deserializes a . The serialization info. The streaming context. is . Initializes a new instance of the class. Creates a new . The error message. The inner exception. Initializes a new instance of the class. Creates a new . The error message. Initializes a new instance of the class. Creates a new . An enumeration of special folders. An enumeration of special folders. The special folder containing an aggregate of all messages. The special folder that contains archived messages. The special folder that contains message drafts. The special folder that contains flagged messages. The special folder that contains important messages. The special folder that contains spam messages. The special folder that contains sent messages. The special folder that contains deleted messages. Status items. Used with No status requested. Updates . Updates . Updates . Updates . Updates . Updates . Updates . Updates . Updates . The action to perform when storing flags, keywords, or labels. Used to specify whether the flags, keywords, or labels should be added, removed, or set for the message(s). Add the specified flags, keywords or labels. Remove the specified flags, keywords or labels. Replace the specified flags, keywords or labels. A request for storing message flags and keywords. A request suitable for storing message flags and keywords. This request is designed to be used with the Store and StoreAsync methods. Initializes a new instance of the class. Creates a new . The store action to perform. The message flags to add, remove or set on the message. Initializes a new instance of the class. Creates a new . The store action to perform. The custom keywords to add, remove or set on the message. is . Initializes a new instance of the class. Creates a new . The store action to perform. The message flags to add, remove or set on the message. The custom keywords to add, remove or set on the message. is . Get the store action to perform. Gets the store action to perform. The store action. Get or set the flags to add, remove or set on the message. Gets or sets the flags to add, remove or set on the message. The message flags. Get or set the keywords to add, remove or set on the message. Gets or sets the keywords to add, remove or set on the message. The keywords. Get or set whether the store operation should run silently. Gets or sets whether the store operation should run silently. Normally, when flags or keywords are changed on a message, a event is emitted. By setting to , this event will not be emitted as a result of this store operation. if the store operation should run silently (not emitting events for flag changes); otherwise, . Get or set a mod-sequence number that the store operation should use to decide if the flags of a message should be updated or not. Gets or sets a mod-sequence number that the store operation should use to decide if the flags of a message should be updated or not. For each message specified in the message set, the server performs the following. If the mod-sequence of every metadata item of the message affected by the store operation is equal to or less than the specified value, then the requested operation is performed. However, if the mod-sequence of any metadata item of the message is greater than the specified value, then the requested operation WILL NOT be performed. In this case, the mod-sequence attribute of the message is not updated, and the message index (or unique identifier in cases where or is used) is added to the list of messages that failed the UNCHANGEDSINCE test. The mod-sequence number can only be used if the server supports the feature. The mod-sequence number. A request for storing GMail-style labels. A request suitable for storing GMail-style labels. This request is designed to be used with the Store and StoreAsync methods. Initializes a new instance of the class. Creates a new . The store action to perform. Initializes a new instance of the class. Creates a new . The store action to perform. The custom keywords to add, remove or set on the message. is . Get the store action to perform. Gets the store action to perform. The store action. Get the GMail-style labels to add, remove or set on the message. Gets the GMail-style labels to add, remove or set on the message. The GMail-style labels. Get or set whether the store operation should run silently. Gets or sets whether the store operation should run silently. Normally, when flags or keywords are changed on a message, a event is emitted. By setting to , this event will not be emitted as a result of this store operation. if the store operation should run silently (not emitting events for label changes); otherwise, . Get or set a mod-sequence number that the store operation should use to decide if the labels of a message should be updated or not. Gets or sets a mod-sequence number that the store operation should use to decide if the labels of a message should be updated or not. For each message specified in the message set, the server performs the following. If the mod-sequence of every metadata item of the message affected by the store operation is equal to or less than the specified value, then the requested operation is performed. However, if the mod-sequence of any metadata item of the message is greater than the specified value, then the requested operation WILL NOT be performed. In this case, the mod-sequence attribute of the message is not updated, and the message index (or unique identifier in cases where or is used) is added to the list of messages that failed the UNCHANGEDSINCE test. The mod-sequence number can only be used if the server supports the feature. The mod-sequence number. An enumeration of threading algorithms. A threading algorithm is used to group messages and their replies together. Thread messages based on their Subject headers. Threads messages based on their References, In-Reply-To, and Message-Id headers. This algorithm is far better than but is also more expensive to calculate. A unique identifier. Represents a unique identifier for messages in a . A 32-bit value assigned to each message, which when used with the unique identifier validity value (see below) forms a 64-bit value that MUST NOT refer to any other message in the mailbox or any subsequent mailbox with the same name forever.Unique identifiers are assigned in a strictly ascending fashion in the mailbox; as each message is added to the mailbox it is assigned a higher UID than the message(s) which were added previously. Unlike message sequence numbers, unique identifiers are not necessarily contiguous. The unique identifier of a message MUST NOT change during the session, and SHOULD NOT change between sessions. Any change of unique identifiers between sessions MUST be detectable using the UIDVALIDITY mechanism discussed below. Persistent unique identifiers are required for a client to resynchronize its state from a previous session with the server (e.g., disconnected or offline access clients); this is discussed further in [IMAP-DISC]. For more information about unique identifiers, see RFC 3501, section 2.3.1.1. The invalid value. The invalid value. The minimum value. The minimum value. The maximum value. The maximum value. Initializes a new instance of the struct. Creates a new with the specified validity and value. The uid validity. The unique identifier. is 0. Initializes a new instance of the struct. Creates a new with the specified value. The unique identifier. is 0. Gets the identifier. The identifier. The identifier. Gets the validity, if non-zero. Gets the UidValidity of the containing folder. The UidValidity of the containing folder or 0 if not known. Gets whether or not the unique identifier is valid. Gets whether or not the unique identifier is valid. if the unique identifier is valid; otherwise, . Compares two objects. Compares two objects. Validity values are not used in the comparison. A value less than 0 if this is less than , a value of 0 if this is equal to , or a value greater than 0 if this is greater than . The other unique identifier. Determines whether the specified is equal to the current . Determines whether the specified is equal to the current . Validity values are not used in the comparison. The to compare with the current . if the specified is equal to the current ; otherwise, . Determines whether two unique identifiers are equal. Determines whether two unique identifiers are equal. Validity values are not used in the comparison. if and are equal; otherwise, . The first unique id to compare. The second unique id to compare. Determines whether one unique identifier is greater than another unique identifier. Determines whether one unique identifier is greater than another unique identifier. Validity values are not used in the comparison. if is greater than ; otherwise, . The first unique id to compare. The second unique id to compare. Determines whether one unique identifier is greater than or equal to another unique identifier. Determines whether one unique identifier is greater than or equal to another unique identifier. Validity values are not used in the comparison. if is greater than or equal to ; otherwise, . The first unique id to compare. The second unique id to compare. Determines whether two unique identifiers are not equal. Determines whether two unique identifiers are not equal. Validity values are not used in the comparison. if and are not equal; otherwise, . The first unique id to compare. The second unique id to compare. Determines whether one unique identifier is less than another unique identifier. Determines whether one unique identifier is less than another unique identifier. Validity values are not used in the comparison. if is less than ; otherwise, . The first unique id to compare. The second unique id to compare. Determines whether one unique identifier is less than or equal to another unique identifier. Determines whether one unique identifier is less than or equal to another unique identifier. Validity values are not used in the comparison. if is less than or equal to ; otherwise, . The first unique id to compare. The second unique id to compare. Determines whether the specified is equal to the current . Determines whether the specified is equal to the current . Validity values are not used in the comparison. The to compare with the current . if the specified is equal to the current ; otherwise, . Serves as a hash function for a object. Serves as a hash function for a object. A hash code for this instance that is suitable for use in hashing algorithms and data structures such as a hash table. Returns a that represents the current . Returns a that represents the current . A that represents the current . Attempt to parse a unique identifier. Attempts to parse a unique identifier. if the unique identifier was successfully parsed; otherwise, false.. The token to parse. The index to start parsing. The unique identifier. Attempt to parse a unique identifier. Attempts to parse a unique identifier. if the unique identifier was successfully parsed; otherwise, false.. The token to parse. The UIDVALIDITY value. The unique identifier. is . Attempt to parse a unique identifier. Attempts to parse a unique identifier. if the unique identifier was successfully parsed; otherwise, false.. The token to parse. The unique identifier. is . Parse a unique identifier. Parses a unique identifier. The unique identifier. A string containing the unique identifier. The UIDVALIDITY. is . is not in the correct format. The unique identifier is greater than . Parse a unique identifier. Parses a unique identifier. The unique identifier. A string containing the unique identifier. is . is not in the correct format. The unique identifier is greater than . A mapping of unique identifiers. A can be used to discover the mapping of one set of unique identifiers to another. For example, when copying or moving messages from one folder to another, it is often desirable to know what the unique identifiers are for each of the messages in the destination folder. Any empty mapping of unique identifiers. Any empty mapping of unique identifiers. Initializes a new instance of the class. Creates a new . The unique identifiers used in the source folder. The unique identifiers used in the destination folder. is . -or- is . Gets the list of unique identifiers used in the source folder. Gets the list of unique identifiers used in the source folder. The unique identifiers used in the source folder. Gets the list of unique identifiers used in the destination folder. Gets the list of unique identifiers used in the destination folder. The unique identifiers used in the destination folder. Gets the number of unique identifiers that have been remapped. Gets the number of unique identifiers that have been remapped. The count. Gets the keys. Gets the keys. The keys. Gets the values. Gets the values. The values. Checks if the specified unique identifier has been remapped. Checks if the specified unique identifier has been remapped. if the unique identifier has been remapped; otherwise, . The unique identifier. Tries to get the remapped unique identifier. Attempts to get the remapped unique identifier. on success; otherwise, . The unique identifier of the message in the source folder. The unique identifier of the message in the destination folder. Gets the remapped unique identifier. Gets the remapped unique identifier. The unique identifier of the message in the source folder. The remapped unique identifier. is out of range. Gets the enumerator for the remapped unique identifiers. Gets the enumerator for the remapped unique identifiers. The enumerator. Gets the enumerator for the remapped unique identifiers. Gets the enumerator for the remapped unique identifiers. The enumerator. A range of items. When dealing with a large range, it is more efficient to use a than a typical IList<>. A that encompasses all messages in the folder. Represents the range of messages from to . Initializes a new instance of the class. Creates a new (invalid) range of unique identifiers. Initializes a new instance of the class. Creates a new range of unique identifiers. The uid validity. The first unique identifier in the range. The last unique identifier in the range. Initializes a new instance of the class. Creates a new range of unique identifiers. The first in the range. The last in the range. is invalid. -or- is invalid. Gets the sort order of the unique identifiers. Gets the sort order of the unique identifiers. The sort order. Gets the validity, if non-zero. Gets the UidValidity of the containing folder. The UidValidity of the containing folder. Gets the minimum unique identifier in the range. Gets the minimum unique identifier in the range. The minimum unique identifier. Gets the maximum unique identifier in the range. Gets the maximum unique identifier in the range. The maximum unique identifier. Get the start of the unique identifier range. Gets the start of the unique identifier range. The start of the range. Get the end of the unique identifier range. Gets the end of the unique identifier range. The end of the range. Get the number of unique identifiers in the range. Gets the number of unique identifiers in the range. The count. Get whether or not the range is read only. A is always read-only. if the range is read only; otherwise, . Adds the unique identifier to the range. Since a is read-only, unique ids cannot be added to the range. The unique identifier to add. The list does not support adding items. Clears the list. Since a is read-only, the range cannot be cleared. The list does not support being cleared. Checks if the range contains the specified unique id. Determines whether or not the range contains the specified unique id. if the specified unique identifier is in the range; otherwise, . The unique id. Copies all of the unique ids in the range to the specified array. Copies all of the unique ids within the range into the array, starting at the specified array index. The array to copy the unique ids to. The index into the array. is . is out of range. Removes the unique identifier from the range. Since a is read-only, unique ids cannot be removed. if the unique identifier was removed; otherwise, . The unique identifier to remove. The list does not support removing items. Gets the index of the specified unique id, if it exists. Finds the index of the specified unique id, if it exists. The index of the specified unique id; otherwise -1. The unique id. Inserts the specified unique identifier at the given index. Inserts the unique identifier at the specified index in the range. The index to insert the unique id. The unique id. The list does not support inserting items. Removes the unique identifier at the specified index. Removes the unique identifier at the specified index. The index. The list does not support removing items. Gets or sets the unique identifier at the specified index. Gets or sets the unique identifier at the specified index. The unique identifier at the specified index. The index. is out of range. The list does not support setting items. Gets an enumerator for the range of unique ids. Gets an enumerator for the range of unique ids. The enumerator. Gets an enumerator for the range of unique ids. Gets an enumerator for the range of unique ids. The enumerator. Returns a that represents the current . Returns a that represents the current . A that represents the current . Attempt to parse a unique identifier range. Attempts to parse a unique identifier range. if the unique identifier range was successfully parsed; otherwise, false.. The token to parse. The UIDVALIDITY value. The unique identifier range. is . Attempt to parse a unique identifier range. Attempts to parse a unique identifier range. if the unique identifier range was successfully parsed; otherwise, false.. The token to parse. The unique identifier range. is . A set of unique identifiers. When dealing with a large number of unique identifiers, it may be more efficient to use a than a typical IList<>. Initializes a new instance of the class. Creates a new unique identifier set. The uid validity. The sorting order to use for the unique identifiers. is invalid. Initializes a new instance of the class. Creates a new unique identifier set. The sorting order to use for the unique identifiers. is invalid. Initializes a new instance of the class. Creates a new set of unique identifier set containing the specified uids. An initial set of unique ids. The sorting order to use for the unique identifiers. is invalid. Gets the sort order of the unique identifiers. Gets the sort order of the unique identifiers. The sort order. Gets the validity, if non-zero. Gets the UidValidity of the containing folder. The UidValidity of the containing folder. Get the number of unique ids in the set. Gets the number of unique ids in the set. The count. Get whether or not the set is read only. Gets whether or not the set is read-only. if the set is read only; otherwise, . Adds the unique identifier to the set. Adds the unique identifier to the set. The unique identifier to add. is invalid. Adds all of the uids to the set. Adds all of the uids to the set. The collection of uids. Clears the list. Clears the list. The collection is readonly. Checks if the set contains the specified unique id. Determines whether or not the set contains the specified unique id. if the specified unique identifier is in the set; otherwise, . The unique id. Copies all of the unique ids in the set to the specified array. Copies all of the unique ids within the set into the array, starting at the specified array index. The array to copy the unique ids to. The index into the array. is . is out of set. Removes the unique identifier from the set. Removes the unique identifier from the set. if the unique identifier was removed; otherwise, . The unique identifier to remove. Gets the index of the specified unique id, if it exists. Finds the index of the specified unique id, if it exists. The index of the specified unique id; otherwise -1. The unique id. Inserts the specified unique identifier at the given index. Inserts the unique identifier at the specified index in the set. The index to insert the unique id. The unique id. The list does not support inserting items. Removes the unique identifier at the specified index. Removes the unique identifier at the specified index. The index. is out of range. Gets or sets the unique identifier at the specified index. Gets or sets the unique identifier at the specified index. The unique identifier at the specified index. The index. is out of range. The list does not support setting items. Gets an enumerator for the set of unique ids. Gets an enumerator for the set of unique ids. The enumerator. Gets an enumerator for the set of unique ids. Gets an enumerator for the set of unique ids. The enumerator. Returns a that represents the current . Returns a that represents the current . A that represents the current . Format a generic list of unique identifiers as a string. Formats a generic list of unique identifiers as a string. The string representation of the collection of unique identifiers. The unique identifiers. is . One or more of the unique identifiers is invalid (has a value of 0). Format the set of unique identifiers as multiple strings that fit within the maximum defined character length. Formats the set of unique identifiers as multiple strings that fit within the maximum defined character length. A list of strings representing the collection of unique identifiers. The maximum length of any returned string of UIDs. is negative. Format a generic list of unique identifiers as multiple strings that fit within the maximum defined character length. Formats a generic list of unique identifiers as multiple strings that fit within the maximum defined character length. A list of strings representing the collection of unique identifiers. The unique identifiers. The maximum length of any returned string of UIDs. is . One or more of the unique identifiers is invalid (has a value of 0). is negative. Attempt to parse the specified token as a set of unique identifiers. Attempts to parse the specified token as a set of unique identifiers. if the set of unique identifiers were successfully parsed; otherwise, . The token containing the set of unique identifiers. The UIDVALIDITY value. The set of unique identifiers. The minimum unique identifier value parsed. The maximum unique identifier value parsed. is . Attempt to parse the specified token as a set of unique identifiers. Attempts to parse the specified token as a set of unique identifiers. if the set of unique identifiers were successfully parsed; otherwise, . The token containing the set of unique identifiers. The UIDVALIDITY value. The set of unique identifiers. is . Attempt to parse the specified token as a set of unique identifiers. Attempts to parse the specified token as a set of unique identifiers. if the set of unique identifiers were successfully parsed; otherwise, . The token containing the set of unique identifiers. The set of unique identifiers. is . Alert event arguments. Some implementations, such as , will emit WebAlert events when they receive web alert messages from the server. Initializes a new instance of the class. Creates a new . The web URI. The alert message. is . -or- is . Gets the web URI. The URI that the user should visit to resolve the issue. The web URI.